Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2154 - ath10k: not supported (-95) (DFS) #8406

Closed
openwrt-bot opened this issue Feb 28, 2019 · 0 comments
Closed

FS#2154 - ath10k: not supported (-95) (DFS) #8406

openwrt-bot opened this issue Feb 28, 2019 · 0 comments
Labels

Comments

@openwrt-bot
Copy link

Elysweyr:

Forum discussion: https://forum.openwrt.org/t/ath10k-issues-5ghz-interface-not-starting-18-06-2/32214/13

Supply the following if possible:

  • Device problem occurs on
    Netgear R7800-100PES

** -** Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 18.06.2 r7676-cddd7b4c77
hostapd 2018-05-21-62566bc2-5
hostapd-common 2018-05-21-62566bc2-5
ath10k-firmware-qca9984 2018-05-12-952afa49-1
kmod-ath 4.14.95+2017-11-01-9
kmod-ath10k 4.14.95+2017-11-01-9

** - Steps to reproduce**

/etc/config/wireless

root@OpenWrt:~# cat /etc/config/wireless

config wifi-device 'radio0'
option country 'AT'
option type 'mac80211'
option hwmode '11a'
option path 'soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
option disabled '0'
option legacy_rates '0'
option channel '100'
option htmode 'VHT160'

config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option wpa_disable_eapol_key_retries '1'
option ssid 'OpenWrt'
option encryption 'psk2'
option key 'XXX'

config wifi-device 'radio1'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0'
option htmode 'HT20'
option disabled '1'

config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'

full system log

https://pastebin.com/JrVw32t3

relevant system log

Thu Feb 28 22:32:40 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Thu Feb 28 22:32:40 2019 daemon.notice netifd: radio0 (804): command failed: Not supported (-95)
Thu Feb 28 22:32:40 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Thu Feb 28 22:32:40 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Feb 28 22:33:23 2019 kern.info kernel: [ 41.023462] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Feb 28 22:33:23 2019 kern.info kernel: [ 41.029465] br-lan: port 2(wlan0) entered blocking state
Thu Feb 28 22:33:23 2019 kern.info kernel: [ 41.029497] br-lan: port 2(wlan0) entered disabled state
Thu Feb 28 22:33:23 2019 kern.info kernel: [ 41.034197] device wlan0 entered promiscuous mode
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Thu Feb 28 22:33:23 2019 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Thu Feb 28 22:33:23 2019 daemon.info dnsmasq[530]: read /etc/hosts - 4 addresses
Thu Feb 28 22:33:23 2019 daemon.info dnsmasq[530]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: interface state HT_SCAN->DFS
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=2, seg0=114, seg1=0, cac_time=60s
Thu Feb 28 22:33:23 2019 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Thu Feb 28 22:33:23 2019 daemon.err hostapd: Interface initialization failed
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: interface state DFS->DISABLED
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Thu Feb 28 22:33:23 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Thu Feb 28 22:33:23 2019 kern.info kernel: [ 41.423511] device wlan0 left promiscuous mode
Thu Feb 28 22:33:23 2019 kern.info kernel: [ 41.423650] br-lan: port 2(wlan0) entered disabled state
Thu Feb 28 22:33:23 2019 kern.warn kernel: [ 41.474131] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
Thu Feb 28 22:33:23 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=21 eloop_data=0xb6ec9bf0 user_data=0 handler=0x3cef4
Thu Feb 28 22:33:23 2019 daemon.notice netifd: radio0 (804): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Thu Feb 28 22:33:23 2019 daemon.notice netifd: radio0 (804): WARNING (wireless_add_process): executable path /usr/sbin/hostapd does not match process path ()
Thu Feb 28 22:33:23 2019 daemon.notice netifd: radio0 (804): Command failed: Invalid argument

**iw list
**

https://pastebin.com/NrYtQtqe

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant