You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am using OpenWRT development from Feb21 on my Linksys EA6350v3 router. So far, everything works fine, however I am trying to setup the WAN port with a VLAN, but if I access: Luci -> Network -> Switch it only displays the CPU port and the 4 LAN ports, the WAN port is not displayed, but if I access the router via SSH, then the port is there on swconfig:
gapf2010:
Hi!
I am using OpenWRT development from Feb21 on my Linksys EA6350v3 router. So far, everything works fine, however I am trying to setup the WAN port with a VLAN, but if I access: Luci -> Network -> Switch it only displays the CPU port and the 4 LAN ports, the WAN port is not displayed, but if I access the router via SSH, then the port is there on swconfig:
root@wl:~# swconfig dev switch0 show
Global attributes:
enable_vlan: 1
enable_mirror_rx: 0
enable_mirror_tx: 0
mirror_monitor_port: 0
mirror_source_port: 0
linkdown: ???
Port 0:
mib: Port 0 MIB counters
RxBroad : 722
RxPause : 0
RxMulti : 2898
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 34565
Rx128Byte : 717134
Rx256Byte : 12692
Rx512Byte : 7510
Rx1024Byte : 7809
Rx1518Byte : 141976
RxMaxByte : 193165
RxTooLong : 0
RxGoodByte : 573563874
RxBadByte : 0
RxOverFlow : 0
Filtered : 4
TxBroad : 3813
TxPause : 0
TxMulti : 73600
TxUnderRun : 0
Tx64Byte : 62619
Tx128Byte : 115302
Tx256Byte : 15655
Tx512Byte : 41091
Tx1024Byte : 34454
Tx1518Byte : 2869708
TxMaxByte : 0
TxOverSize : 0
TxByte : 4378564661
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
Port 1:
mib: Port 1 MIB counters
RxBroad : 10
RxPause : 0
RxMulti : 126
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 40
Rx128Byte : 534
Rx256Byte : 313
Rx512Byte : 38
Rx1024Byte : 18
Rx1518Byte : 15
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 141761
RxBadByte : 0
RxOverFlow : 0
Filtered : 13
TxBroad : 180
TxPause : 0
TxMulti : 367
TxUnderRun : 0
Tx64Byte : 335
Tx128Byte : 362
Tx256Byte : 279
Tx512Byte : 216
Tx1024Byte : 29
Tx1518Byte : 52
TxMaxByte : 0
TxOverSize : 0
TxByte : 274900
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
Port 2:
mib: Port 2 MIB counters
RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 4419
TxPause : 0
TxMulti : 76469
TxUnderRun : 0
Tx64Byte : 46240
Tx128Byte : 1084
Tx256Byte : 2641
Tx512Byte : 28047
Tx1024Byte : 2915
Tx1518Byte : 1
TxMaxByte : 0
TxOverSize : 0
TxByte : 18438433
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
Port 3:
mib: Port 3 MIB counters
RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 4419
TxPause : 0
TxMulti : 76469
TxUnderRun : 0
Tx64Byte : 46240
Tx128Byte : 1084
Tx256Byte : 2641
Tx512Byte : 28047
Tx1024Byte : 2915
Tx1518Byte : 1
TxMaxByte : 0
TxOverSize : 0
TxByte : 18438433
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
Port 4:
mib: Port 4 MIB counters
RxBroad : 3765
RxPause : 0
RxMulti : 73151
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 62113
Rx128Byte : 115122
Rx256Byte : 15386
Rx512Byte : 40931
Rx1024Byte : 34440
Rx1518Byte : 2869706
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 4378395323
RxBadByte : 0
RxOverFlow : 0
Filtered : 11
TxBroad : 379
TxPause : 0
TxMulti : 2755
TxUnderRun : 0
Tx64Byte : 34306
Tx128Byte : 717333
Tx256Byte : 12274
Tx512Byte : 7258
Tx1024Byte : 7735
Tx1518Byte : 335099
TxMaxByte : 0
TxOverSize : 0
TxByte : 569081244
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
Port 5:
mib: Port 5 MIB counters
RxBroad : 38
RxPause : 0
RxMulti : 323
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 526
Rx128Byte : 312
Rx256Byte : 54
Rx512Byte : 205
Rx1024Byte : 23
Rx1518Byte : 30
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 217499
RxBadByte : 0
RxOverFlow : 0
Filtered : 9
TxBroad : 348
TxPause : 0
TxMulti : 259
TxUnderRun : 0
Tx64Byte : 344
Tx128Byte : 406
Tx256Byte : 200
Tx512Byte : 199
Tx1024Byte : 20
Tx1518Byte : 13
TxMaxByte : 0
TxOverSize : 0
TxByte : 194389
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
VLAN 1:
vid: 1
ports: 0 1 2 3 4 5
VLAN 2:
vid: 2
ports: 0t 5t
root@wl:~#
So the firmware knows there is an additional port in the switch, it's just Luci that does not display it.
For extra info, here's the OpenWRT version I am running:
BusyBox v1.30.1 () built-in shell (ash)
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -| || | | || || |
|_____|| |||||___||| |____|
|| W I R E L E S S F R E E D O M
OpenWrt SNAPSHOT, r9414-2d13945
Thanks in advance for your help with this, very appreciated.
The text was updated successfully, but these errors were encountered: