OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version openwrt-18.06
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by resistor4u - 10.02.2019

FS#2111 - Linksys EA3500 drops internet connectivity but doesn't drop devices

On a Linksys EA3500, I’ve flashed 18.06.2 from the OEM firmware. I tried to setup two WPA2 networks (2.4 and 5.0) for my small apartment. I’m able to connect to both networks from laptops and phones, and the router maintains the connections, but internet connectivity gets dropped and picked up in rapid succession - choppy is apropos. But running successive speedtests shows a near constant 11.00-69 Mbit/s connection.

I’ve attached the System log, Kernel log, and a file with `uname -a` and `opkg list-installed`. There are several suspicious RF and TF antenna failures in the logs

I suspected at first it was an issue with the router having too high TX/RX, because I really do have a really small apartment. But that option is set to auto. FWIW, I am able to `ssh` to the router from all my devices OK, but trying to `ssh` to other connected devices on the network is not practical - i.e., it is possible after waiting for the connection for 10+ minutes, and when the connection is made, there is an unbelievable amount of lag.

On IRC, it was suggested that I go to 18.06.0 before trying to put the OEM firmware back. This issue is not unlike this one: https://dev.archive.openwrt.org/ticket/21284.

DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='18.06.2'
DISTRIB_REVISION='r7676-cddd7b4c77'
DISTRIB_TARGET='kirkwood/generic'
DISTRIB_ARCH='arm_xscale'
DISTRIB_DESCRIPTION='OpenWrt 18.06.2 r7676-cddd7b4c77'
DISTRIB_TAINTS=''

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing