OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Votes 1
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by anomeome - 29.01.2019

FS#2091 - wrt1900 (v1 mamba) USB 3 port broken

Appears to be a regression on master with no power to USB 3 port on wrt1900, still works on 18.x
forum thread

Bjørn Mork commented on 25.02.2019 11:47

FWIW, I've been using arbitrary master revisions on a wrt1900v1 for quite a while without noticing any such issues. I have a single FS USB device plugged into the USB3 port, and do use this device regularily so I am pretty sure I would have noticed it failing. I believe FS and HS devices should behave the same way wrt USB3, so I don't think that difference can explain this working for me.

BusyBox v1.30.0 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r9330-880f8e6d3287
 -----------------------------------------------------
root@wrt1900ac-1:~# lsusb -t
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
    |__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=io_edgeport, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M

EDIT: A thought just occured to me: I have never tried hotplugging anything into this USB port. Maybe that is what's broken? My USB device is always plugged in. Could you please provide some more details on how you do the testing?

anomeome commented on 26.02.2019 16:32

Right after I opened this FS I flashed a _bot_ generated snapshot and the USB3 port had power with that image. I then reconciled the installed modules of that against my image and nothing stood out as a possible cause.

I am just leaving an old USB thumb drive (1.1??) that has an on-board LED to see power/activity plugged into the USB3 port.

Some data from an image flashed today.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing