OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by rsalvaterra - 15.01.2019

FS#2059 - uclient-fetch not working at all on http (not https) connections.

I just tried today’s trunk snapshot on my Turris Omnia; everything’s working fine apart from uclient-fetch. I noticed the failure because the ddns updater stopped working. If I install wget, everything works, since wget replaces uclient-fetch. Sample output follows.

Bad:

root@heimdall:/tmp# uclient-fetch http://perdu.com/ Downloading ‘http://perdu.com/’ Failed to establish connection
root@heimdall:/tmp#

Good:

root@heimdall:/tmp# wget http://perdu.com/ –2019-01-15 14:31:09– http://perdu.com/ Resolving perdu.com... 208.97.177.124
Connecting to perdu.com|208.97.177.124|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 204 [text/html]
Saving to: ‘index.html’

index.html 100%[==================================================================================================================================================================>] 204 --.-KB/s in 0s 2019-01-15 14:31:10 (16.4 MB/s) - 'index.html' saved [204/204] root@heimdall:/tmp# Image builder command line: make image PROFILE=turris-omnia PACKAGES="-kmod-ath9k -dnsmasq -odhcpd -odhcpd-ipv6only -odhcp6c -ppp -ppp-mod-pppoe ddns-scripts dnsmasq-full ethtool haveged htop ipset kmod-ipt-raw kmod-ipt-raw6 kmod-nf-nathelper-extra kmod-wireguard nano sqm-scripts tcpdump tor wget wireguard-tools zram-swap"

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing