Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1995 - Huawei HG655b stuck in bootloop #7544

Closed
openwrt-bot opened this issue Dec 10, 2018 · 2 comments
Closed

FS#1995 - Huawei HG655b stuck in bootloop #7544

openwrt-bot opened this issue Dec 10, 2018 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

Mihai:

The router reboots continuously while booting into OpenWrt 18.06.1. The same thing happens on version 18.06.0 as well.
Last working one is LEDE 17.01.6 .

Boot log:

CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
Build Date: Fri Apr 16 15:18:13 CST 2010 (lihua@IBM_x3500)
Copyright (C) 2000-2008 Broadcom Corporation.

Parallel flash device: name AM29LV320MB, id 0x2200, size 8192KB
CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Boot Address 0xb8000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-6) : HW65x
Number of MAC Addresses (1-32) : 11
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 64
Main Thread Number [0|1] : 0

*** Press any key to stop auto run (2 seconds) ***
Auto run second count down: 0
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80a00000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x80a00000
[ 0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 SMP Wed Aug 15 20:42:39 2018
[ 0.000000] Detected Broadcom 0x6368 CPU revision b2
[ 0.000000] CPU frequency is 400 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 1.0.37-102.6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350)
[ 0.000000] board: board name: HW65x
[ 0.000000] MIPS: machine is Huawei HG655b
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu @8108a000 s17440 r8192 d23520 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 58636K/65536K available (3773K kernel code, 183K rwdata, 588K rodata, 1336K init, 227K bss, 6900K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000015] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008130] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
[ 0.042781] pid_max: default: 32768 minimum: 301
[ 0.047767] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.054541] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.069410] SMP: Booting CPU1...
[ 11.992235] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[ 11.992251] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 11.992575] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
[ 0.121564] Synchronize counters for CPU 1:
[ 0.121565] done.
[ 0.121573] SMP: CPU1 is running
[ 0.131460] Brought up 2 CPUs
[ 0.142908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.152949] futex hash table entries: 512 (order: 1, 8192 bytes)
[ 0.159260] pinctrl core: initialized pinctrl subsystem
[ 0.166652] NET: Registered protocol family 16
[ 0.175484] Can't analyze schedule() prologue at 803baf08
[ 0.197227] registering PCI controller with io_map_base unset
[ 0.203139] registering PCI controller with io_map_base unset
[ 0.234630] PCI host bridge to bus 0000:00
[ 0.238879] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.245938] pci_bus 0000:00: root bus resource [io 0x8000000-0x8007fff]
[ 0.252837] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.259812] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.276363] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
[ 0.284076] PCI host bridge to bus 0000:01
[ 0.288281] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[ 0.295332] pci_bus 0000:01: root bus resource [io 0x8008000-0x800ffff]
[ 0.302249] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[ 0.309225] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.317823] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.326326] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
[ 0.333401] pci 0000:01:1e.0: BAR 7: assigned [io 0x8008000-0x80080ff]
[ 0.340186] pci 0000:01:1e.0: BAR 8: assigned [io 0x8008400-0x80084ff]
[ 0.346986] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[ 0.352727] pci 0000:01:1e.0: bridge window [io 0x8008000-0x80080ff]
[ 0.359528] pci 0000:01:1e.0: bridge window [io 0x8008400-0x80084ff]
[ 0.366347] pci 0000:01:1e.0: bridge window [mem 0x38000000-0x3fffffff]
[ 0.380818] clocksource: Switched to clocksource MIPS
[ 0.388361] NET: Registered protocol family 2
[ 0.394665] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.401924] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.408534] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.415436] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.421530] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.428514] NET: Registered protocol family 1
[ 0.435230] Crashlog allocated RAM at address 0x3f00000
[ 0.444861] random: fast init done
[ 0.450589] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.471721] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.477733] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.512734] io scheduler noop registered
[ 0.516874] io scheduler deadline registered (default)
[ 0.525247] bcm6368-pinctrl 10000080.pin-controller: registered at mmio b0000080
[ 0.534012] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
[ 0.543754] console [ttyS0] enabled
[ 0.543754] console [ttyS0] enabled
[ 0.550889] bootconsole [early0] disabled
[ 0.550889] bootconsole [early0] disabled
[ 0.559894] bcm63xx-rng bcm63xx-rng: registered RNG driver
[ 0.566702] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 0.577107] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.582383] Amd/Fujitsu Extended Query version 1.3.
[ 0.587560] number of CFI chips: 1
[ 0.591665] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[ 0.598317] bcm63xxpart: Partition 1 is nvram offset 7f0000 and length 10000
[ 0.605576] bcm63xxpart: Partition 2 is linux offset 10000 and length 7e0000
[ 0.612884] 3 bcm63xxpart partitions found on MTD device 18000000.nor
[ 0.619494] Creating 3 MTD partitions on "18000000.nor":
[ 0.624958] 0x000000000000-0x000000010000 : "CFE"
[ 0.631868] 0x0000007f0000-0x000000800000 : "nvram"
[ 0.638937] 0x000000010000-0x0000007f0000 : "linux"
[ 0.646345] parser_imagetag: rootfs: CFE image tag at 0x0 CRC invalid (expected 0212102b, actual 24b1b887)
[ 0.657859] bcm63xx-spi 10000800.spi: at [mem 0x10000800-0x10000f0b flags 0x200] (irq 9, FIFOs size 542)
[ 0.669448] libphy: Fixed MDIO Bus: probed
[ 0.717976] b53_common: found switch: BCM63xx, rev 0
[ 0.723524] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.733982] NET: Registered protocol family 10
[ 0.741672] NET: Registered protocol family 17
[ 0.746347] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.759683] 8021q: 802.1Q VLAN Support v1.8
[ 0.774484] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 0.782230] Please append a correct "root=" boot option; here are the available partitions:
[ 0.790832] 1f00 64 mtdblock0 [ 0.794921] (driver?)
[ 0.797342] 1f01 64 mtdblock1 [ 0.801455] (driver?)
[ 0.803858] 1f02 8064 mtdblock2 [ 0.807994] (driver?)
[ 0.810425] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 0.820791] Rebooting in 1 seconds..
[ 1.819072] triggering watchdog soft-reset...

@openwrt-bot
Copy link
Author

danitool:

It should be already fixed with this commit

https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=26d4cb2ca7acde1254f6ce6c0a54e0aca1489a0f

@openwrt-bot
Copy link
Author

Mihai:

Oh, that's great news! Thank you very much for looking into this!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant