OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
  • Task Type Bug Report
  • Category Kernel
  • Assigned To No-one
  • Operating System All
  • Severity Medium
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by bolvan - 03.12.2018

FS#1982 - ag71xx ethtool broken

Device Dlink dir-825 rev.B
OpenWrt SNAPSHOT, r8623-7e88753

It always worked well for years from very old openwrt to lede with kernel 4.9
Now on kernel 4.14 its broken

ethtool eth1
Settings for eth1:
Cannot get device settings: Bad address
        Current message level: 0x000000ff (255)
                               drv probe link timer ifdown ifup rx_err tx_err
        Link detected: yes

mii-tool -v eth1
eth1: negotiated 100baseTx-FD, link ok
  product info: vendor 00:07:32, model 22 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD

link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

bolvan commented on 05.12.2018 16:55

Netgear WNDR3800

same chipset, same problem


Available keyboard shortcuts


Task Details

Task Editing