OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Feature Request
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version openwrt-18.06
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Kurt Roeckx - 17.11.2018

FS#1955 - Ubiquiti EdgeRouter X initramfs-factory.tar

On https://openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka there is an explanation of how to install OpenWRT on an EdgeRouter X using the tools that are standard installed on it and are used by Ubiquiti to upgrade the firmware. It seems as part of the build process a openwrt-ramips-mt7621-ubnt-erx-initramfs-factory.tar file is generated that can be used for that. But it seems you can not download it from the official site, you need to build it yourself. On the official site is an openwrt-18.06.1-ramips-mt7621-ubnt-erx-initramfs-kernel.bin file. I think that file can be used for installing using tftp, but it can’t be used with the Ubiquiti tools. Can the initramfs-factory.tar be made available to download?

INAGAKI Hiroshi commented on 24.11.2018 14:56

It seems that image generation failed due to "initramfs kernel image too big".

WARNING: initramfs kernel image too big, cannot generate factory image

buildlog on official buildbot

The size of official image "openwrt-18.06.1-ramips-mt7621-ubnt-erx-initramfs-kernel.bin" is 3,428,783 bytes, but it must be less than 3,145,728 bytes in order to generate initramfs-factory.tar.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing