OpenWrt/LEDE Project

  • Status Closed
  • Percent Complete
    100%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version openwrt-18.06
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Alessandro Radicati - 25.09.2018
Last edited by Adrian Schmutzler - 21.07.2020

FS#1869 - WRT610N V2 is not detected by the initial network configuration script

My WRT610N V2 is not detected by the initial network configuration script. The switch remains unconfigured and wlan/lan vlans are not created. The issue seems to be in:

openwrt/target/linux/brcm47xx/base-files/etc/board.d/01_network

as it does not have a case for this router. Here’s the model string from the live system:

root@OpenWrt:~# cat /tmp/sysinfo/model
Linksys WRT610N V2

The actual configuration is identical to the Linksys E3000 V1 and the switch and interfaces are correctly configured if the above string is added to the same case.

My firmware version:

OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.228.31946-f64b152)

Board name if needed:

root@OpenWrt:~# cat /tmp/sysinfo/board_name
0x04cf:42

Thanks,
radicale

Closed by  Adrian Schmutzler
21.07.2020 10:07
Reason for closing:  Fixed
Additional comments about closing:  

Fixed in https://github.com/openwrt/op enwrt/commit/a2fee73e270305c4cb086055cc3 0e97f65e6f58b

Project Manager
Adrian Schmutzler commented on 08.07.2020 13:02

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing