Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1855 - USB works ONLY with WiFi disabled #8458

Closed
openwrt-bot opened this issue Sep 19, 2018 · 2 comments
Closed

FS#1855 - USB works ONLY with WiFi disabled #8458

openwrt-bot opened this issue Sep 19, 2018 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

markobog:

The problem occurs on Netgear WNDR3700v3 USING latest 18.06.

After setting up the router and installing required USB packages then rebooting the router, USB can't be accessed. USB LED indicator light flickers few times during booting of the router, then shuts off. Using DMESG later I see that USB connects, then suddenly disconnects. The ONLY way to use USB functionality is to DISABLE WIFI.

To simply reproduce the issue, flash openwrt to your wndr3700v3, install required base USB packages.

1.) Disable wifi and find USB devices working normally.
2.) Enable Wifi and find USB devices not working and not being powered. (no led indicator on USB).

Use DMESG to see USB being recognized during boot and then simply later disconnected for no reason whatsoever.

The same issue did occur on 17.01. with the same behavior.

@openwrt-bot
Copy link
Author

robimarko:

Where did you find a v3 image?
I can only find v1,v2 and v4 in OpenWrt

@openwrt-bot
Copy link
Author

markobog:

@RobertMarko [[https://downloads.openwrt.org/releases/18.06.1/targets/brcm47xx/mips74k/|External Link]]

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant