You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Steps to reproduce
1. Download, flash, boot. Failed to boot and stuck on the first scene with a yellow flashlight icon on the right side
2. RPi 3B+ Status: LED: Power:Off, ACT:4long+4short=8 flashes: SDRAM not recognised. You need newer bootcode.bin/start.elf firmware.
Effort to fix:
I checked the boot partition and found the firmware is kinda outdated. (check here [[https://github.com/raspberrypi/firmware/tree/master/boot|RaspberriPi@github]] ),
So I generated a new bcm2710 Makefile with latest firmware release and packed all them in. Still not working.
Thanks for your effort.
The text was updated successfully, but these errors were encountered:
DKingCN:
Device problem occurs on
Raspberry Pi 3 B+
Software versions of OpenWrt/LEDE release, packages, etc.
https://downloads.openwrt.org/releases/18.06.1/targets/brcm2708/bcm2710/openwrt-18.06.1-brcm2708-bcm2710-rpi-3-ext4-factory.img.gz
Steps to reproduce
1. Download, flash, boot. Failed to boot and stuck on the first scene with a yellow flashlight icon on the right side
2. RPi 3B+ Status: LED: Power:Off, ACT:4long+4short=8 flashes: SDRAM not recognised. You need newer bootcode.bin/start.elf firmware.
Effort to fix:
I checked the boot partition and found the firmware is kinda outdated. (check here [[https://github.com/raspberrypi/firmware/tree/master/boot|RaspberriPi@github]] ),
So I generated a new bcm2710 Makefile with latest firmware release and packed all them in. Still not working.
Thanks for your effort.
The text was updated successfully, but these errors were encountered: