You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Supply the following if possible:
After got the firmware using lede 17.01 version, the MT7628 can not reboot. i find some guides from the internet, and operated according the guide, but can not compile successfully.
The internet guide is as flowing:
/* REVISIT: many of these chips have deep power-down modes, which
* should clearly be entered on suspend() to minimize power use.
* And also when they're otherwise idle...
*/
};
After i finished the changes, the compile can not pass:
there will be some error information, please check the attached picture:
-Werror incompatible pointer types,
it is very urgent for this case. hope you can help us as soon as possible!
thanks very much
The text was updated successfully, but these errors were encountered:
louislu213:
Supply the following if possible:
After got the firmware using lede 17.01 version, the MT7628 can not reboot. i find some guides from the internet, and operated according the guide, but can not compile successfully.
The internet guide is as flowing:
static int m25p_remove(struct spi_device *spi)
{
struct m25p *flash = spi_get_drvdata(spi);
}
static struct spi_driver m25p80_driver = {
.driver = {
.name = "m25p80",
.owner = THIS_MODULE,
},
.id_table = m25p_ids,
.probe = m25p_probe,
.remove = m25p_remove,
// manfeel, add shutdown method to reset spi flash
.shutdown = m25p_remove,
};
After i finished the changes, the compile can not pass:
there will be some error information, please check the attached picture:
-Werror incompatible pointer types,
it is very urgent for this case. hope you can help us as soon as possible!
thanks very much
The text was updated successfully, but these errors were encountered: