We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Pilot6:
I am testing ath79 image on DIR-825B1 device. The device has 2 ath9k wireless adapters connected to PCI BUS.
After af3b175 the IRQ is assigned, but one for both adapters. In my case IRQ 12.
I think that causes problems:
If I disable the 5GHz device in /etc/config/wireless, the other device is malfunctioning. It doesn't send beacons and isn't detected.
If both wireless adapters are enabled, 5Ghz works poorly.
The text was updated successfully, but these errors were encountered:
Ath79
root@Router:~# cat /proc/interrupts CPU0 3: 0 MIPS 3 ehci_hcd:usb1 4: 6325117 MIPS 4 19000000.eth 5: 6409628 MIPS 5 1a000000.eth 7: 802886 MIPS 7 timer 8: 12 MISC 3 ttyS0 11: 0 MISC 6 ohci_hcd:usb2 12: 887718 AR71XX PCI 1 ath9k, ath9k ERR: 631
ar71xx
root@OpenWrt:~# cat /proc/interrupts CPU0 3: 0 MIPS 3 ehci_hcd:usb1 4: 859 MIPS 4 eth0 5: 565 MIPS 5 eth1 7: 9006 MIPS 7 timer 11: 12 MISC 3 serial 14: 0 MISC 6 ohci_hcd:usb2 40: 0 AR71XX PCI 0 ath9k 41: 0 AR71XX PCI 1 ath9k ERR: 0
Sorry, something went wrong.
This has been fixed by https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=8132e0624726f0df512f79052299a5790259cda0
and
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=fd20fdd0b836c5e6b3c8feb1a5ff5e475ddcc978
No branches or pull requests
Pilot6:
I am testing ath79 image on DIR-825B1 device.
The device has 2 ath9k wireless adapters connected to PCI BUS.
After af3b175 the IRQ is assigned, but one for both adapters. In my case IRQ 12.
I think that causes problems:
If I disable the 5GHz device in /etc/config/wireless, the other device is malfunctioning. It doesn't send beacons and isn't detected.
If both wireless adapters are enabled, 5Ghz works poorly.
The text was updated successfully, but these errors were encountered: