Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1701 - [wnr3500l-v1-other-regions] Unable to upgrade from lede-17.01.4 to lede-17.01.5 #7438

Closed
openwrt-bot opened this issue Jul 28, 2018 · 1 comment
Labels

Comments

@openwrt-bot
Copy link

agriveaux:

Hello,

I was unable to upgrade from lede-17.01.4 to lede-17.01.5 from web interface or from bootloader tftpd with wnr3500l-v1-other-regions images, attached the boot log from both firmware and the sha256sums:

sha256sum lede-17.01.5-brcm47xx-mips74k-netgear-wnr3500l-v1-other-regions-squashfs.chk
5dbaddfae5bbbcca6fb4f0e2810de2135dbadf0bf346e755ca6063700f445d4d lede-17.01.5-brcm47xx-mips74k-netgear-wnr3500l-v1-other-regions-squashfs.chk

sha256sum lede-17.01.4-brcm47xx-mips74k-netgear-wnr3500l-v1-other-regions-squashfs.chk
6e4eaa5e988f99f77b5e00d8be4f288934ae69e3056ceaffc4e3fb60099d2a3c lede-17.01.4-brcm47xx-mips74k-netgear-wnr3500l-v1-other-regions-squashfs.chk

Start TFTP server
Reading :: Done. 3805242 bytes read
Programming...done. 3805242 bytes written
Write len/chksum offset @ 0x0074FFF8...done.
Decompressing..........done

CFE for WNR3500L version: v1.0.36
Build Date: Tue Aug 11 15:09:14 CST 2009
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found a 8MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes

Device eth0: hwaddr C0-3F-0E-E1-97-EA, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
too long file.
LZMA boot failed
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3864 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 4.4.140 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3104-41de9a2) ) #0 Fri Jul 13 19:25:14 2018
[ 0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
[ 0.000000] bcm47xx: Using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 60876K/65536K available (3006K kernel code, 139K rwdata, 368K rodata, 188K init, 294K bss, 4660K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[ 0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
[ 0.000000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[ 0.000000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[ 0.000000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] MIPS: machine is Netgear WNR3500L
[ 0.000000] bcm47xx: Setting up vectored interrupts
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 8438235966 ns
[ 0.000016] sched_clock: 32 bits at 226MHz, resolution 4ns, wraps every 9481163773ns
[ 0.000088] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[ 0.070059] pid_max: default: 32768 minimum: 301
[ 0.070323] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070355] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.074430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.074486] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.075763] NET: Registered protocol family 16
[ 0.076831] Can't analyze schedule() prologue at 800077c8
[ 0.097612] clocksource: Switched to clocksource MIPS
[ 0.099778] NET: Registered protocol family 2
[ 0.101549] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.101611] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.101653] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.101827] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.101880] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.102346] NET: Registered protocol family 1
[ 0.136945] bcma: bus0: PCIEcore in host mode found
[ 0.136961] bcma: bus0: This PCIE core is disabled and not working
[ 0.138624] bcma: bus0: Bus registered
[ 0.140082] Crashlog allocated RAM at address 0x3f00000
[ 0.173818] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.173852] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.179094] io scheduler noop registered
[ 0.179132] io scheduler deadline registered (default)
[ 0.179528] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.184744] console [ttyS0] disabled
[ 0.205005] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
[ 0.650369] console [ttyS0] enabled
[ 0.716781] 8 bcm47xxpart partitions found on MTD device bcm47xxsflash
[ 0.723492] Creating 8 MTD partitions on "bcm47xxsflash":
[ 0.729058] 0x000000000000-0x000000040000 : "boot"
[ 0.738490] 0x000000040000-0x0000007d0000 : "firmware"
[ 0.746855] 0x0000007d0000-0x0000007e0000 : "POT"
[ 0.754929] 0x0000007e0000-0x0000007f0000 : "board_data"
[ 0.763597] 0x0000007f0000-0x000000800000 : "nvram"
[ 0.771879] 0x00000004001c-0x000000040924 : "loader"
[ 0.780208] 0x000000040924-0x000000167c00 : "linux"
[ 0.788492] 0x000000167c00-0x0000007d0000 : "rootfs"
[ 0.796719] mtd: device 7 (rootfs) set to be root filesystem
[ 0.802656] 1 squashfs-split partitions found on MTD device rootfs
[ 0.809019] 0x0000003a0000-0x0000007d0000 : "rootfs_data"
[ 0.821473] libphy: Fixed MDIO Bus: probed
[ 0.825896] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
[ 0.834901] libphy: bcma_mdio mii bus: probed
[ 0.839469] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[ 0.993379] b53_common: found switch: BCM53115, rev 8
[ 1.000032] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 1.006312] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[ 1.016346] NET: Registered protocol family 10
[ 1.027256] NET: Registered protocol family 17
[ 1.032044] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.044946] 8021q: 802.1Q VLAN Support v1.8
[ 1.061633] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[ 1.070250] Freeing unused kernel memory: 188K

FE for WNR3500L version: v1.0.36
Build Date: Tue Aug 11 15:09:14 CST 2009
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found a 8MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes

Device eth0: hwaddr C0-3F-0E-E1-97-EA, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
too long file.
LZMA boot failed
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3848 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 4.4.92 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3104-41de9a2) ) #0 Tue Oct 17 17:46:20 2017
[ 0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
[ 0.000000] bcm47xx: Using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 60940K/65536K available (2979K kernel code, 134K rwdata, 368K rodata, 156K init, 294K bss, 4596K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[ 0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
[ 0.000000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[ 0.000000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[ 0.000000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] MIPS: machine is Netgear WNR3500L
[ 0.000000] bcm47xx: Setting up vectored interrupts
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 8438235966 ns
[ 0.000015] sched_clock: 32 bits at 226MHz, resolution 4ns, wraps every 9481163773ns
[ 0.000087] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[ 0.070070] pid_max: default: 32768 minimum: 301
[ 0.070333] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070363] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.074377] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.074431] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.075699] NET: Registered protocol family 16
[ 0.076766] Can't analyze schedule() prologue at 800077c8
[ 0.097432] clocksource: Switched to clocksource MIPS
[ 0.099646] NET: Registered protocol family 2
[ 0.101436] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.101500] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.101541] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.101723] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.101772] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.102233] NET: Registered protocol family 1
[ 0.138267] bcma: bus0: PCIEcore in host mode found
[ 0.138284] bcma: bus0: This PCIE core is disabled and not working
[ 0.139823] bcma: bus0: Bus registered
[ 0.141279] Crashlog allocated RAM at address 0x3f00000
[ 0.173720] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.173754] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.178931] io scheduler noop registered
[ 0.178969] io scheduler deadline registered (default)
[ 0.179399] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.184624] console [ttyS0] disabled
[ 0.204881] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
[ 0.649908] console [ttyS0] enabled
[ 0.716330] 8 bcm47xxpart partitions found on MTD device bcm47xxsflash
[ 0.723042] Creating 8 MTD partitions on "bcm47xxsflash":
[ 0.728592] 0x000000000000-0x000000040000 : "boot"
[ 0.737974] 0x000000040000-0x0000007d0000 : "firmware"
[ 0.746296] 0x0000007d0000-0x0000007e0000 : "POT"
[ 0.754307] 0x0000007e0000-0x0000007f0000 : "board_data"
[ 0.762954] 0x0000007f0000-0x000000800000 : "nvram"
[ 0.771197] 0x00000004001c-0x00000004091c : "loader"
[ 0.779503] 0x00000004091c-0x000000166000 : "linux"
[ 0.787711] 0x000000166000-0x0000007d0000 : "rootfs"
[ 0.795968] mtd: device 7 (rootfs) set to be root filesystem
[ 0.801906] 1 squashfs-split partitions found on MTD device rootfs
[ 0.808266] 0x0000003a0000-0x0000007d0000 : "rootfs_data"
[ 0.821280] libphy: Fixed MDIO Bus: probed
[ 0.825701] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
[ 0.834008] libphy: bcma_mdio mii bus: probed
[ 0.838578] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[ 0.993243] b53_common: found switch: BCM53115, rev 8
[ 0.999847] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 1.006179] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[ 1.016224] NET: Registered protocol family 10
[ 1.027053] NET: Registered protocol family 17
[ 1.031842] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.044737] 8021q: 802.1Q VLAN Support v1.8
[ 1.059021] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[ 1.067285] Freeing unused kernel memory: 156K
[ 2.806611] init: Console is alive
[ 2.810639] init: - watchdog -
[ 3.997377] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.143653] usbcore: registered new interface driver usbfs
[ 4.149584] usbcore: registered new interface driver hub
[ 4.155199] usbcore: registered new device driver usb
[ 4.169708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.178819] ehci-platform: EHCI generic platform driver
[ 4.184317] ehci-platform ehci-platform.0: EHCI Host Controller
[ 4.190529] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 4.199005] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
[ 4.217502] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 4.225784] hub 1-0:1.0: USB hub found
[ 4.230502] hub 1-0:1.0: 2 ports detected
[ 4.239429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.248047] ohci-platform: OHCI generic platform driver
[ 4.253525] ohci-platform ohci-platform.0: Generic Platform OHCI controller
[ 4.260791] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[ 4.269219] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
[ 4.333295] hub 2-0:1.0: USB hub found
[ 4.338046] hub 2-0:1.0: 2 ports detected
[ 4.348953] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.358415] init: - preinit -
[ 4.937596] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.107517] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
[ 6.115064] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.012167] random: procd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 10.209518] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 10.223679] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 10.512569] procd: - early -
[ 10.515754] procd: - watchdog -
[ 11.163982] procd: - watchdog -
[ 11.168071] procd: - ubus -
[ 11.325865] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.441414] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.451517] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.460856] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.470925] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.480252] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.489980] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.499705] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[ 11.509819] procd: - init -
Please press Enter to activate this console.
[ 13.270551] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.285240] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.311701] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[ 13.319947] Backport generated by backports.git backports-20160324-13-g24da7d3c
[ 13.333019] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.352710] nf_conntrack version 0.5.0 (954 buckets, 3816 max)
[ 13.416167] xt_time: kernel timezone is -0000
[ 13.508191] PPP generic driver version 2.4.2
[ 13.517216] NET: Registered protocol family 24
[ 13.540700] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
[ 13.547966] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
[ 13.554192] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 7, Version 0
[ 13.562486] Broadcom 43xx driver loaded [ Features: NL ]
[ 13.686566] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.687579] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
[ 25.746893] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 25.777547] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 25.784300] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 30.647563] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.687011] device eth0.1 entered promiscuous mode
[ 30.692016] device eth0 entered promiscuous mode
[ 30.730434] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 30.868472] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 32.267639] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
[ 32.275184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.307649] br-lan: port 1(eth0.1) entered forwarding state
[ 32.313443] br-lan: port 1(eth0.1) entered forwarding state
[ 32.319424] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 32.427588] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 34.307460] br-lan: port 1(eth0.1) entered forwarding state

@openwrt-bot
Copy link
Author

agriveaux:

Maybe related to the almost same bug FS#1697.
Can you correct the Reported Version ?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant