New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#1632 - ZBT APE522ii Wlanaccess over radio0 breaks device #5912
Comments
mkresin:
I highly doubt it's an image provided by us. ra0/ra1 rather sounds like you are using the proprietary ralink driver for wireless, which neither OpenWrt nor LEDE uses. Could it be that you're using the OpenWrt based firmware from ZBT? |
jkimmel: Yes, I'm using the OpenWrt based firmware 17.01 But you're right the correct terms are Generic MAC80211 802.11nac (radio0) and Generic MAC80211 802.11bgn (radio1) instead of ra0 and ra1 |
jkimmel: If I could I would change in title Ra1 to radio0 |
jkimmel: Sorry I got it wrong once more. It is radio1 breaking the device |
jow-: Provide dmesg, logread, /etc/config/wireless and ideally a serial log showing the crash. |
jkimmel: Despite first comment I got access via eth in 17.01.04 Edit: |
jkimmel:
Version LEDE 17.01.3 stable
Device boots successfully
Default config for both radios: Client
Changing both radios to AP and rebooting
Connecting via radio1 (2.4GHz) renders device unaccessible
Disabling radio1 and connecting via radio0 no problem
Versions LEDE 17.01.4 and Openwrt 18.06.0
Device not accessible via Ethernet nor Wlan
The text was updated successfully, but these errors were encountered: