New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#1611 - Missing files for ZyXEL P2812-HNU-FX #8513
Comments
Mafketel: I can confirm those files are missing. In the snapshots there are some more files but not enough to make it working. openwrt-lantiq-p2812hnufx_nandtpl-u-boot.img |
Mafketel: in the git repository define U-Boot/p2812hnufx_ram nandspl might not be working anyway since I am using nandtpl version (tpl is adding an extra boot stage on the spl boot staging) from a commit All SPL variants are lzo compressed. The lzop binary is used for Additionally at least the NAND SPL support is broken and doesn't create https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b52932e773914ee22e848e619d11b4aaf9845feb |
Mafketel: Ok I compiled yesterdays snapshot, removing the " DEPENDS+=@broken" compiles the nand-spl file. The lzop package was indeed requested and I installed it on my build system(Ubuntu 16.04 LTS) no problem there However .... if you turn it back on it does compile without errors but the modem will not boot with it. ROM VER: 1.0.5 nothing happens afterwards. The asc file created in the same compile session works without any problem, so it is not the u-boot compilation that is wrong but something about packing the file for the nand. log of serial is added. p.s. I was able to generate an initrmfs file, by turning the option on in menuconfig. But it not working yet need to look into that a little bit more later. |
klausenbusk: Mafketel did you find a working solution? |
Mafketel: If you want to know how to install openwrt on the modem go to the modem page on openwrt I spend some time explaining how to do it. If you want to know if the current openwrt builds are fixed I'd say no, no working solution yet. |
Mijzelf:
The 'Supplementary Files' section of lantiq/xrx200 contains only a u-boot-p2812hnufx_ram.
To install OpenWRT on an OEM box a u-boot-nand, uImage and initramfs are needed according to the install instructions.
https://openwrt.org/toh/zyxel/p2812hnu-f1
The text was updated successfully, but these errors were encountered: