Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1587 - Qca9887 ath10K drive crash #7951

Closed
openwrt-bot opened this issue Jun 12, 2018 · 1 comment
Closed

FS#1587 - Qca9887 ath10K drive crash #7951

openwrt-bot opened this issue Jun 12, 2018 · 1 comment
Labels

Comments

@openwrt-bot
Copy link

kos:

MINIBOX V3.2
CPU:QCA9531
FLASH:16M
RAM:128M
5G chip:QCA9887

[ 0.000000] Linux version 4.9.107 (root@lede) (gcc version 7.3.0 (lede) ) #0 Sun Jun 10 14:03:23 2018
[ 0.000000] MyLoader: sysp=cd03e8c7, boardp=565c9627, parts=9b565cbd
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 8041ea74, node_mem_map 81000020
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=MINIBOX_V3_2 console=ttyS0,115200 rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125072K/131072K available (2917K kernel code, 162K rwdata, 760K rodata, 312K init, 270K bss, 6000K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:550.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6950037990 ns
[ 0.000011] sched_clock: 32 bits at 275MHz, resolution 3ns, wraps every 7809031678ns
[ 0.008273] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
[ 0.071079] pid_max: default: 32768 minimum: 301
[ 0.076091] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.104180] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.111370] NET: Registered protocol family 16
[ 0.117931] MIPS: machine is Minibox V3.2 board
[ 0.127278] registering PCI controller with io_map_base unset
[ 0.135112] ar71xx: invalid MDIO id 1
[ 0.139031] ar71xx: using random MAC address for eth0
[ 0.379364] ar71xx: using random MAC address for eth1
[ 0.633989] PCI host bridge to bus 0000:00
[ 0.638333] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[ 0.645652] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.651522] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.658690] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.667077] pci 0000:00:00.0: [168c:0050] type 00 class 0x028000
[ 0.667127] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.667184] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.667265] pci 0000:00:00.0: supports D1
[ 0.667277] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.667518] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.667552] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
[ 0.675316] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
[ 0.682944] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.689027] clocksource: Switched to clocksource MIPS
[ 0.695645] NET: Registered protocol family 2
[ 0.701316] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.708689] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.715471] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.722324] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.728502] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.735483] NET: Registered protocol family 1
[ 0.740174] PCI: CLS 0 bytes, default 32
[ 0.745440] Crashlog allocated RAM at address 0x3f00000
[ 0.752221] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.766885] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.773095] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.793392] io scheduler noop registered
[ 0.797534] io scheduler deadline registered (default)
[ 0.803385] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.810641] console [ttyS0] disabled
[ 0.834597] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.843712] console [ttyS0] enabled
[ 0.851276] bootconsole [early0] disabled
[ 0.869621] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.884352] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.889600] 5 tp-link partitions found on MTD device spi0.0
[ 0.895355] Creating 5 MTD partitions on "spi0.0":
[ 0.900350] 0x000000000000-0x000000020000 : "u-boot"
[ 0.907217] 0x000000020000-0x00000015df44 : "kernel"
[ 0.914412] 0x00000015df44-0x000000ff0000 : "rootfs"
[ 0.921531] mtd: device 2 (rootfs) set to be root filesystem
[ 0.927429] 1 squashfs-split partitions found on MTD device rootfs
[ 0.933909] 0x000000550000-0x000000ff0000 : "rootfs_data"
[ 0.941400] 0x000000ff0000-0x000001000000 : "art"
[ 0.948172] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.956596] libphy: Fixed MDIO Bus: probed
[ 0.986045] libphy: ag71xx_mdio: probed
[ 1.621997] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 1.632318] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.261593] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.315088] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.322395] NET: Registered protocol family 17
[ 2.327207] 8021q: 802.1Q VLAN Support v1.8
[ 2.339807] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.349634] Freeing unused kernel memory: 312K
[ 2.354223] This architecture does not have kernel memory protection.
[ 2.559043] random: fast init done
[ 3.046533] init: Console is alive
[ 3.050439] init: - watchdog -
[ 4.116728] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 4.210493] usbcore: registered new interface driver usbfs
[ 4.216263] usbcore: registered new interface driver hub
[ 4.221936] usbcore: registered new device driver usb
[ 4.234340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.243176] ehci-platform: EHCI generic platform driver
[ 4.248701] ehci-platform ehci-platform: EHCI Host Controller
[ 4.254754] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 4.265091] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.299073] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.306607] hub 1-0:1.0: USB hub found
[ 4.310952] hub 1-0:1.0: 1 port detected
[ 4.316118] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.326306] init: - preinit -
[ 5.364892] random: procd: uninitialized urandom read (4 bytes read)
[ 8.739003] jffs2: notice: (352) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 8.756844] mount_root: switching to jffs2 overlay
[ 8.797645] urandom-seed: Seeding with /etc/urandom.seed
[ 8.966151] procd: - early -
[ 8.969965] procd: - watchdog -
[ 9.642492] procd: - watchdog -
[ 9.646084] procd: - ubus -
[ 9.790521] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.804891] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.812142] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.819984] procd: - init -
[ 10.216209] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.230412] usbcore: registered new interface driver cdc_wdm
[ 10.239008] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 10.247367] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 10.258118] usbcore: registered new interface driver ipheth
[ 10.271504] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 10.353951] xt_time: kernel timezone is -0000
[ 10.361109] usbcore: registered new interface driver cdc_ether
[ 10.541738] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.597904] PPP generic driver version 2.4.2
[ 10.605538] NET: Registered protocol family 24
[ 10.613271] usbcore: registered new interface driver qmi_wwan
[ 10.622421] usbcore: registered new interface driver rndis_host
[ 10.661827] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 10.667870] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 10.943915] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 10.955031] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.050021] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 11.059775] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 11.070532] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.253137] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 11.262558] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-6.bin failed with error -2
[ 11.273671] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.455482] firmware ath10k!QCA9887!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 11.474867] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
[ 11.484487] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 11.499666] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00040 api 5 features no-p2p,ignore-otp,skip-clock-init,mfp,allows-mesh-bcast crc32 3334e5a3
[ 11.601094] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/board-2.bin failed with error -2
[ 11.611933] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.726715] firmware ath10k!QCA9887!hw1.0!board-2.bin: firmware_loading_store: map pages failed
[ 11.743408] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 546cca0d
[ 11.769404] ath10k_pci 0000:00:00.0: failed to read device EEPROM at 0000
[ 11.777300] ath10k_pci 0000:00:00.0: caldata loaded from partition [art]
[ 12.830988] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal eeprom max-sta 128 raw 0 hwcrypto 1
[ 12.971295] ath: EEPROM regdomain: 0x0
[ 12.971307] ath: EEPROM indicates default country code should be used
[ 12.971310] ath: doing EEPROM country->regdmn map search
[ 12.971326] ath: country maps to regdmn code: 0x3a
[ 12.971332] ath: Country alpha2 being used: US
[ 12.971336] ath: Regpair used: 0x3a
[ 13.127132] ath: EEPROM regdomain: 0x0
[ 13.127145] ath: EEPROM indicates default country code should be used
[ 13.127149] ath: doing EEPROM country->regdmn map search
[ 13.127170] ath: country maps to regdmn code: 0x3a
[ 13.127177] ath: Country alpha2 being used: US
[ 13.127181] ath: Regpair used: 0x3a
[ 13.140052] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 13.145226] ieee80211 phy1: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
[ 13.157026] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.893250] urandom_read: 5 callbacks suppressed
[ 14.893260] random: jshn: uninitialized urandom read (4 bytes read)
[ 23.564137] br-lan: port 1(eth1) entered blocking state
[ 23.564157] br-lan: port 1(eth1) entered disabled state
[ 23.564594] device eth1 entered promiscuous mode
[ 23.565896] br-lan: port 1(eth1) entered blocking state
[ 23.565915] br-lan: port 1(eth1) entered forwarding state
[ 24.509186] br-lan: port 1(eth1) entered disabled state
[ 25.345009] eth1: link up (1000Mbps/Full duplex)
[ 25.345068] br-lan: port 1(eth1) entered blocking state
[ 25.345079] br-lan: port 1(eth1) entered forwarding state
[ 26.610009] ath: EEPROM regdomain: 0x822a
[ 26.610022] ath: EEPROM indicates we should expect a country code
[ 26.610031] ath: doing EEPROM country->regdmn map search
[ 26.610037] ath: country maps to regdmn code: 0x22
[ 26.610043] ath: Country alpha2 being used: NZ
[ 26.610047] ath: Regpair used: 0x22
[ 26.610055] ath: regdomain 0x822a dynamically updated by user
[ 26.610158] ath: EEPROM regdomain: 0x822a
[ 26.610162] ath: EEPROM indicates we should expect a country code
[ 26.610170] ath: doing EEPROM country->regdmn map search
[ 26.610176] ath: country maps to regdmn code: 0x22
[ 26.610180] ath: Country alpha2 being used: NZ
[ 26.610183] ath: Regpair used: 0x22
[ 26.610189] ath: regdomain 0x822a dynamically updated by user
[ 29.838243] ath10k_pci 0000:00:00.0: failed to read device EEPROM at 0000
[ 29.839218] ath10k_pci 0000:00:00.0: caldata loaded from partition [art]
[ 31.814735] br-lan: port 2(wlan0) entered blocking state
[ 31.814753] br-lan: port 2(wlan0) entered disabled state
[ 31.815215] device wlan0 entered promiscuous mode
[ 31.863527] br-lan: port 3(wlan1-1) entered blocking state
[ 31.863545] br-lan: port 3(wlan1-1) entered disabled state
[ 31.864031] device wlan1-1 entered promiscuous mode
[ 31.864122] br-lan: port 3(wlan1-1) entered blocking state
[ 31.864134] br-lan: port 3(wlan1-1) entered forwarding state
[ 32.829121] br-lan: port 3(wlan1-1) entered disabled state
[ 35.017706] wlan1: authenticate with 7e:ad:cf:39:2b:82
[ 35.031567] wlan1: send auth to 7e:ad:cf:39:2b:82 (try 1/3)
[ 35.033829] wlan1: authenticated
[ 35.039327] wlan1: associate with 7e:ad:cf:39:2b:82 (try 1/3)
[ 35.044025] wlan1: RX AssocResp from 7e:ad:cf:39:2b:82 (capab=0x411 status=0 aid=2)
[ 35.044329] wlan1: associated
[ 35.075993] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by 7e:ad:cf:39:2b:82
[ 36.244707] br-lan: port 3(wlan1-1) entered blocking state
[ 36.244727] br-lan: port 3(wlan1-1) entered forwarding state
[ 39.134490] br-lan: port 2(wlan0) entered blocking state
[ 39.134520] br-lan: port 2(wlan0) entered forwarding state
[ 62.562748] random: crng init done
[ 1744.900623] ath10k_pci 0000:00:00.0: bss channel survey timed out
[ 1747.940457] ath10k_pci 0000:00:00.0: bss channel survey timed out
[ 1750.980351] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1754.020262] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1757.070117] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1760.100019] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1763.139784] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1766.179687] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1769.219577] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1774.899235] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1777.939092] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1780.986536] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1784.024277] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1787.058838] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1790.098563] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1793.138413] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1796.178242] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1800.343496] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1804.977916] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1808.020380] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1811.057519] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1814.097400] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1817.143231] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1820.177331] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1823.219063] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1826.256830] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1834.336429] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1837.376262] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1840.416093] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1843.455991] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1846.505551] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1849.535656] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1852.575507] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1855.775309] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1860.335143] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1863.374943] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1866.414782] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1869.454614] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1872.496511] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1875.534310] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1878.574185] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1881.613991] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1884.653855] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1890.493530] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1893.533390] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1896.573246] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1899.613073] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1902.662933] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1905.692765] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1908.732738] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1911.772447] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1914.812252] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1920.171980] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1923.217262] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1926.251764] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1929.291504] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1932.336764] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1935.371146] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1938.411007] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1941.450845] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1944.490643] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1950.330354] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1953.370196] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1956.409991] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1959.449824] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1962.489718] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1965.529527] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1968.569397] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1971.609234] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1975.689202] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1980.658820] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1983.688670] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1986.728592] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1989.773828] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1992.808207] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1995.848059] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2004.087657] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2007.127466] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2010.167356] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2013.207176] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2016.247043] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2019.286864] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2022.326706] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2030.006318] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2033.046176] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2036.086015] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2039.125842] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2042.165749] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2045.205527] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2048.248521] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2054.325056] ath10k_pci 0000:00:00.0: failed to install key for vdev 0 peer 4c:49:e3:d6:b9:4b: -11
[ 2054.325076] wlan0: failed to remove key (0, 4c:49:e3:d6:b9:4b) from hardware (-11)
[ 2054.353286] ath10k_pci 0000:00:00.0: cipher 0 is not supported
[ 2054.353309] ath10k_pci 0000:00:00.0: failed to remove peer wep key 0: -122
[ 2054.353321] ath10k_pci 0000:00:00.0: failed to clear all peer wep keys for vdev 0: -122
[ 2054.353336] ath10k_pci 0000:00:00.0: failed to disassociate station: 4c:49:e3:d6:b9:4b vdev 0: -122
[ 2054.353342] ------------[ cut here ]------------
[ 2054.353535] WARNING: CPU: 0 PID: 1647 at backports-2017-11-01/net/mac80211/sta_info.c:993 sta_set_sinfo+0x8d4/0x9cc [mac80211]
[ 2054.353540] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath rndis_host qmi_wwan pppox ppp_generic mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables cfg80211 cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG x_tables usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack ipheth crc_ccitt compat cdc_wdm ledtrig_usbport ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii
[ 2054.353728] CPU: 0 PID: 1647 Comm: hostapd Not tainted 4.9.107 #0
[ 2054.353733] Stack : 80487672 00000035 00000000 00000001 8654828c 803febc7 803b75d0 0000066f
[ 2054.353760] 804837c0 000003e1 00000000 00000008 00000000 800a976c 803bce08 80400000
[ 2054.353785] 00000003 000003e1 803bafc0 876d5b0c 00000000 800d75cc 80487672 00000072
[ 2054.353811] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2054.353834] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2054.353857] ...
[ 2054.353865] Call Trace:
[ 2054.353880] [<8006b5c0>] show_stack+0x70/0x8c
[ 2054.353917] [<80080524>] __warn+0x110/0x118
[ 2054.353931] [<800805c0>] warn_slowpath_null+0x1c/0x2c
[ 2054.354036] [<87606f24>] sta_set_sinfo+0x8d4/0x9cc [mac80211]
[ 2054.354134] [<87604978>] sta_info_get_bss+0x18/0x6c [mac80211]
[ 2054.354233] [<876070fc>] sta_info_destroy_addr_bss+0x38/0x60 [mac80211]
[ 2054.354377] [<8754e2e0>] cfg80211_check_station_change+0x2364/0x3240 [cfg80211]
[ 2054.354414] ---[ end trace 76e3fd41f87c33dc ]---
[ 2057.364905] ath10k_pci 0000:00:00.0: failed to delete peer 4c:49:e3:d6:b9:4b for vdev 0: -11
[ 2057.364942] ath10k_pci 0000:00:00.0: found sta peer 4c:49:e3:d6:b9:4b (ptr 8677b600 id 229) entry on vdev 0 after it was supposedly removed
[ 2057.366192] ------------[ cut here ]------------
[ 2057.366384] WARNING: CPU: 0 PID: 1647 at backports-2017-11-01/net/mac80211/sta_info.c:1001 sta_set_sinfo+0x924/0x9cc [mac80211]
[ 2057.366389] Modules linked in: ath9k ath9k_common pppoe ppp_async ath9k_hw ath10k_pci ath10k_core ath rndis_host qmi_wwan pppox ppp_generic mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables cfg80211 cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG x_tables usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack ipheth crc_ccitt compat cdc_wdm ledtrig_usbport ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii
[ 2057.366577] CPU: 0 PID: 1647 Comm: hostapd Tainted: G W 4.9.107 #0
[ 2057.366582] Stack : 80487672 00000043 00000000 00000001 8654828c 803febc7 803b75d0 0000066f
[ 2057.366609] 804837c0 000003e9 00000000 00000008 00000000 800a976c 803bce08 80400000
[ 2057.366634] 00000003 000003e9 803bafc0 876d5b0c 00000000 800d75cc 80487672 00000073
[ 2057.366660] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2057.366683] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2057.366706] ...
[ 2057.366714] Call Trace:
[ 2057.366728] [<8006b5c0>] show_stack+0x70/0x8c
[ 2057.366763] [<80080524>] __warn+0x110/0x118
[ 2057.366777] [<800805c0>] warn_slowpath_null+0x1c/0x2c
[ 2057.366888] [<87606f74>] sta_set_sinfo+0x924/0x9cc [mac80211]
[ 2057.366987] [<87604978>] sta_info_get_bss+0x18/0x6c [mac80211]
[ 2057.367086] [<876070fc>] sta_info_destroy_addr_bss+0x38/0x60 [mac80211]
[ 2057.367225] [<8754e2e0>] cfg80211_check_station_change+0x2364/0x3240 [cfg80211]
[ 2057.367262] ---[ end trace 76e3fd41f87c33dd ]---
[ 2060.404774] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2063.444576] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2066.484459] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2069.524270] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2072.564091] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2075.603941] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2078.643808] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2081.683658] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2084.723443] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2087.771438] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2090.803177] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2093.842997] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2102.162502] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2105.202331] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2108.242168] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2111.282032] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2114.321878] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2117.361702] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2120.401502] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2128.401051] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2131.450938] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2134.480713] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2137.520545] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2140.560510] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2143.600263] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2146.640040] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2155.199617] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2158.239437] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2161.279214] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2164.319096] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2167.358866] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2170.398688] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2173.438543] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2181.598039] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 2184.637881] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 2187.677688] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 2190.727568] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 2193.757337] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 2196.797183] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 2199.837021] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 2203.516915] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request

Trying to replace many firmware versions, but always this way, it will collapse for a while.

Each crash has the following error log

[ 1744.900623] ath10k_pci 0000:00:00.0: bss channel survey timed out
[ 1747.940457] ath10k_pci 0000:00:00.0: bss channel survey timed out
[ 1750.980351] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1754.020262] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11
[ 1757.070117] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -11
[ 1760.100019] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 1763.139784] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -11
[ 1766.179687] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -11
[ 1769.219577] ath10k_pci 0000:00:00.0: failed to start hw scan: -11
[ 1774.899235] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1777.939092] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1780.986536] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request
[ 1784.024277] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -11

@openwrt-bot
Copy link
Author

adrianschmutzler:

Please check again with a more recent version of OpenWrt.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant