We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
srchack:
Can not mount SPI Flash on MZK-DP150N.
[ 4.435797] spi spi0.0: force spi mode3 [ 4.444935] m25p80 spi0.0: unrecognized JEDEC id bytes: 1c, 70, 16 [ 4.457452] m25p80: probe of spi0.0 failed with error -2
MZK-DP150N new revision hardware is SPI Flash change. new revision is EN25QH32.
is not found linux driver for en25qh32. I want the following patch.
--- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1007,6 +1007,7 @@ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, { "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) },
{ "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) }, { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) }, { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
This device can not access u-boot unless the case is destroyed. I also want to correspond to LEDE 17.0x.
The text was updated successfully, but these errors were encountered:
this fix for openwrt master branch. 13684ba
Sorry, something went wrong.
No branches or pull requests
srchack:
Can not mount SPI Flash on MZK-DP150N.
[ 4.435797] spi spi0.0: force spi mode3
[ 4.444935] m25p80 spi0.0: unrecognized JEDEC id bytes: 1c, 70, 16
[ 4.457452] m25p80: probe of spi0.0 failed with error -2
MZK-DP150N new revision hardware is SPI Flash change.
new revision is EN25QH32.
is not found linux driver for en25qh32.
I want the following patch.
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1007,6 +1007,7 @@
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
{ "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) },
This device can not access u-boot unless the case is destroyed.
I also want to correspond to LEDE 17.0x.
The text was updated successfully, but these errors were encountered: