Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1488 - mt7621: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 #6453

Open
openwrt-bot opened this issue Apr 13, 2018 · 1 comment
Labels
flyspray kernel pull request/issue with Linux kernel related changes

Comments

@openwrt-bot
Copy link

easyteacher:

Device: Newifi D1
Software versions: Kernel 4.14.32
Steps to reproduce:
During the startup process, some warning messages are shown.

[ 0.000000] Linux version 4.14.32 (vbox@ubuntu64) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6433+33-4fd8722056)) #0 SMP Thu Apr 12 13:06:34 2018
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Newifi-D1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 805b3f20, node_mem_map 81003000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4b0 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu @8120f000 s26704 r8192 d22448 u57344
[ 0.000000] pcpu-alloc: s26704 r8192 d22448 u57344 alloc=144096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=000444b0
[ 0.000000] Readback ErrCtl register=000444b0
[ 0.000000] Memory: 253220K/262144K available (4611K kernel code, 232K rwdata, 996K rodata, 228K init, 269K bss, 8924K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007814] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.073978] pid_max: default: 32768 minimum: 301
[ 0.078756] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085264] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094078] Hierarchical SRCU implementation.
[ 0.099174] smp: Bringing up secondary CPUs ...
[ 7.655479] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 7.655489] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 7.655502] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 7.655616] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
[ 7.655624] in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
[ 7.655637] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.32 #0
[ 7.655645] Stack : 00000000 00000000 00000000 00000000 805f7afa 00000034 00000000 00000000
[ 7.655682] 8fc441f4 805909c7 8051e450 00000001 00000000 00000001 8fc65cb8 b3f6da09
[ 7.655715] 00000000 00000000 805f0000 00750966 00000004 8047876c fa8ea686 0038fb56
[ 7.655750] 00000000 80590000 00000035 80620000 00000000 00000000 805b0000 80581274
[ 7.655783] 00000001 00000007 00000000 00000001 00000000 80590000 00000000 00000000
[ 7.655815] ...
[ 7.655826] Call Trace:
[ 7.655867] [<800107d8>] show_stack+0x58/0x100
[ 7.655907] [<804617ac>] dump_stack+0x9c/0xe0
[ 7.655933] [<8005233c>] ___might_sleep+0xf8/0x118
[ 7.655959] [<8047d32c>] mutex_lock+0x24/0x78
[ 7.655994] [<80075000>] __free_irq+0x74/0x308
[ 7.656004] [<80014188>] mips_state_shutdown+0x28/0x40
[ 7.656033] [<80099c34>] clockevents_switch_state+0x124/0x190
[ 7.656044] [<8009a098>] clockevents_exchange_device+0x80/0xa8
[ 7.656055] [<8009aa00>] tick_check_new_device+0xac/0x138
[ 7.656065] [<800993e4>] clockevents_register_device+0xc4/0x138
[ 7.656073] [<80014548>] r4k_clockevent_init+0x250/0x2a8
[ 7.656091] [<8001676c>] start_secondary+0x40/0x3b4
[ 7.656141] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.163947] Synchronize counters for CPU 1: done.
[ 7.504565] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 7.504575] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 7.504583] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 7.504667] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.385133] Synchronize counters for CPU 2: done.
[ 7.593682] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 7.593690] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 7.593700] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 7.593785] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.470307] Synchronize counters for CPU 3: done.
[ 0.500168] smp: Brought up 1 node, 4 CPUs
[ 0.507979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.517768] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.524075] pinctrl core: initialized pinctrl subsystem
[ 0.529837] NET: Registered protocol family 16
[ 0.534614] random: fast init done
[ 0.545217] FPU Affinity set after 11720 emulations
[ 0.546759] pull PCIe RST: RALINK_RSTCTRL = 0
[ 0.851370] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.856403] ***** Xtal 40MHz *****
[ 0.859776] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.864887] Port 0 N_FTS = 1b105000
[ 0.868325] Port 1 N_FTS = 1b105000
[ 0.871785] Port 2 N_FTS = 1b102800
[ 2.026446] PCIE2 no card, disable it(RST&CLK)
[ 2.030790] -> 21007f2
[ 2.033209] PCIE0 enabled
[ 2.035797] PCIE1 enabled
[ 2.038423] PCI host bridge /pcie@1e140000 ranges:
[ 2.043164] MEM 0x0000000060000000..0x000000006fffffff
[ 2.048331] IO 0x000000001e160000..0x000000001e16ffff
[ 2.053532] PCI coherence region base: 0x8fc35cf0, mask/settings: 0x60000000
[ 2.070744] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.076667] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.082431] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.089461] PCI host bridge to bus 0000:00
[ 2.093497] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 2.100467] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 2.106285] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 2.113040] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 2.120950] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 2.120992] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.121005] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[ 2.121072] pci 0000:00:00.0: supports D1
[ 2.121081] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.121373] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 2.121410] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.121429] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[ 2.121501] pci 0000:00:01.0: supports D1
[ 2.121512] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 2.122026] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[ 2.122087] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.122132] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 2.122227] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.122427] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.122652] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[ 2.122701] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.122827] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.123091] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.123116] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 2.123183] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.129696] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.136621] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.143178] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.150103] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.156828] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 2.164011] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 2.170738] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[ 2.177496] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[ 2.184221] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 2.191495] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 2.198644] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.203581] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.210307] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 2.217495] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[ 2.224216] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.229152] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 2.237407] clocksource: Switched to clocksource GIC
[ 2.243982] NET: Registered protocol family 2
[ 2.249228] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.256158] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.262545] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.268984] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.274749] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.281253] NET: Registered protocol family 1
[ 2.285581] PCI: CLS 0 bytes, default 32
[ 2.517334] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.523818] Crashlog allocated RAM at address 0x3f00000
[ 2.529224] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 2.542943] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.548725] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.561810] io scheduler noop registered (default)
[ 2.566513] io scheduler deadline registered
[ 2.571470] gpio-export gpio_export: 2 gpio(s) exported
[ 2.577612] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 2.585277] console [ttyS0] disabled
[ 2.588848] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[ 2.597847] console [ttyS0] enabled
[ 2.604711] bootconsole [early0] disabled
[ 2.613397] cacheinfo: Failed to find cpu0 device node
[ 2.618724] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.625714] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.633100] spi-mt7621 1e000b00.spi: sys_freq: 50000000
[ 2.638356] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
[ 2.646753] in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0
[ 2.653340] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 4.14.32 #0
[ 2.660527] Stack : 00000000 00000000 00000000 00000000 805f7afa 00000042 00000000 00000000
[ 2.668863] 8fc40374 805909c7 8051e450 00000002 00000001 00000001 8fc35b80 b3f6da09
[ 2.677194] 00000000 00000000 805f0000 00003800 00000000 000000b5 00000007 00000000
[ 2.685525] 00000000 80590000 0009f81c 00000000 00000000 00000000 805b0000 8fc35ca0
[ 2.693859] 805a0000 00000000 00000000 805f0000 00000001 802a5638 00000008 805f0008
[ 2.702191] ...
[ 2.704627] Call Trace:
[ 2.707090] [<800107d8>] show_stack+0x58/0x100
[ 2.711545] [<804617ac>] dump_stack+0x9c/0xe0
[ 2.715899] [<8005233c>] ___might_sleep+0xf8/0x118
[ 2.720688] [<8047d32c>] mutex_lock+0x24/0x78
[ 2.725051] [<8028efb8>] __of_reset_control_get+0xc4/0x280
[ 2.730514] [<8028f76c>] device_reset+0x24/0x60
[ 2.735023] [<80306278>] mt7621_spi_probe+0x170/0x1f4
[ 2.740082] [<802b5908>] platform_drv_probe+0x40/0x84
[ 2.745110] [<802b3df4>] really_probe+0x148/0x2c0
[ 2.749795] [<802b4010>] __driver_attach+0xa4/0xdc
[ 2.754565] [<802b1e7c>] bus_for_each_dev+0x5c/0xbc
[ 2.759422] [<802b3344>] bus_add_driver+0xf8/0x218
[ 2.764192] [<802b48f0>] driver_register+0xac/0xfc
[ 2.768962] [<80005650>] do_one_initcall+0xd0/0x1a0
[ 2.773820] [<805b7d84>] kernel_init_freeable+0x168/0x228
[ 2.779196] [<80479dd0>] kernel_init+0x10/0x10c
[ 2.783705] [<8000b158>] ret_from_kernel_thread+0x14/0x1c
[ 2.789468] BUG: scheduling while atomic: swapper/0/1/0x00000002
[ 2.795449] Modules linked in:
[ 2.798512] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 4.14.32 #0
[ 2.805696] Stack : 00000000 00000000 00000000 00000000 805f7afa 00000042 00000000 00000000
[ 2.814027] 8fc40374 805909c7 8051e450 00000002 00000001 00000001 8fc35aa0 b3f6da09
[ 2.822361] 00000000 00000000 805f0000 00003ec8 00000000 000000d0 00000007 00000000
[ 2.830695] 00000000 80590000 000c2f30 00000000 00000000 00000000 805b0000 805ebf80
[ 2.839028] 00000001 00000000 00000000 805f0000 00000001 802a5638 00000008 805f0008
[ 2.847362] ...
[ 2.849799] Call Trace:
[ 2.852250] [<800107d8>] show_stack+0x58/0x100
[ 2.856688] [<804617ac>] dump_stack+0x9c/0xe0
[ 2.861034] [<8005217c>] __schedule_bug+0x60/0x7c
[ 2.865718] [<8047b478>] __schedule+0x70/0x880
[ 2.870143] [<8047bd00>] schedule+0x78/0x9c
[ 2.874313] [<8047f104>] schedule_timeout+0x38/0x1c4
[ 2.879256] [<8047ca4c>] wait_for_common+0x130/0x1f8
[ 2.884198] [<8047cb7c>] wait_for_completion_killable+0x18/0x30
[ 2.890106] [<8004c8ec>] __kthread_create_on_node+0xdc/0x198
[ 2.895738] [<8004c9c0>] kthread_create_on_node+0x18/0x24
[ 2.901144] [<80305698>] spi_register_controller+0x3a0/0x99c
[ 2.906786] [<802b5908>] platform_drv_probe+0x40/0x84
[ 2.911816] [<802b3df4>] really_probe+0x148/0x2c0
[ 2.916498] [<802b4010>] __driver_attach+0xa4/0xdc
[ 2.921269] [<802b1e7c>] bus_for_each_dev+0x5c/0xbc
[ 2.926124] [<802b3344>] bus_add_driver+0xf8/0x218
[ 2.930895] [<802b48f0>] driver_register+0xac/0xfc
[ 2.935663] [<80005650>] do_one_initcall+0xd0/0x1a0
[ 2.940522] [<805b7d84>] kernel_init_freeable+0x168/0x228
[ 2.945895] [<80479dd0>] kernel_init+0x10/0x10c
[ 2.950405] [<8000b158>] ret_from_kernel_thread+0x14/0x1c
[ 2.956511] m25p80 spi0.0: mx25l25635e (32768 Kbytes)
[ 2.961628] 4 fixed-partitions partitions found on MTD device spi0.0
[ 2.967972] Creating 4 MTD partitions on "spi0.0":
[ 2.972752] 0x000000000000-0x000000030000 : "u-boot"
[ 2.978849] 0x000000030000-0x000000040000 : "u-boot-env"
[ 2.985207] 0x000000040000-0x000000050000 : "factory"
[ 2.991375] 0x000000050000-0x000002050000 : "firmware"
[ 2.996516] mtd: partition "firmware" extends beyond the end of device "spi0.0" -- size truncated to 0x1fb0000
[ 3.127720] 2 uimage-fw partitions found on MTD device firmware
[ 3.133641] 0x000000050000-0x000000225cb3 : "kernel"
[ 3.139699] 0x000000225cb3-0x000002000000 : "rootfs"
[ 3.145637] mtd: device 5 (rootfs) set to be root filesystem
[ 3.151419] 1 squashfs-split partitions found on MTD device rootfs
[ 3.157596] 0x000000b20000-0x000002000000 : "rootfs_data"
[ 3.164826] libphy: Fixed MDIO Bus: probed
[ 3.239400] libphy: mdio: probed
[ 4.642197] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.648961] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 4.659861] NET: Registered protocol family 10
[ 4.665907] Segment Routing with IPv6
[ 4.669819] NET: Registered protocol family 17
[ 4.674317] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.687224] 8021q: 802.1Q VLAN Support v1.8
[ 4.692495] zswap: default zpool zbud not available
[ 4.697407] zswap: pool creation failed
[ 4.703160] hctosys: unable to open rtc device (rtc0)
[ 4.713707] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 4.721275] Freeing unused kernel memory: 228K
[ 4.725711] This architecture does not have kernel memory protection.
[ 4.865669] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
[ 4.969052] random: crng init done
[ 5.381236] init: Console is alive
[ 5.384855] init: - watchdog -
[ 6.359776] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[ 6.388601] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[ 7.373619] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 7.493267] usbcore: registered new interface driver usbfs
[ 7.498897] usbcore: registered new interface driver hub
[ 7.504373] usbcore: registered new device driver usb
[ 7.550732] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.564476] SCSI subsystem initialized
[ 7.572133] ehci-platform: EHCI generic platform driver
[ 7.586683] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.592091] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 7.607612] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[ 7.616095] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 7.622952] hub 1-0:1.0: USB hub found
[ 7.626775] hub 1-0:1.0: 2 ports detected
[ 7.631465] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.636800] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 7.644453] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.653457] hub 2-0:1.0: USB hub found
[ 7.657277] hub 2-0:1.0: 1 port detected
[ 7.672165] MTK MSDC device init.
[ 7.676201] SET_IOS: CLK(0kHz), BUS(PUSHPULL), BW(1), PWR(UP), VDD(3.30v), TIMING(LEGACY)
[ 7.697432] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 7.727647] mtk-sd: MediaTek MT6575 MSDC Driver
[ 7.741088] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 7.743674] sdhci: Secure Digital Host Controller Interface driver
[ 7.753068] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 7.760318] sdhci: Copyright(c) Pierre Ossman
[ 7.774099] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.780480] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 7.783800] usbcore: registered new interface driver usb-storage
[ 7.793206] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 7.802811] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.827773] init: - preinit -
[ 7.839566] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(SD_HS)
[ 7.839595] SET_IOS: CLK(50000kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(SD_HS)
[ 7.847987] SET_IOS: CLK(50000kHz), BUS(PUSHPULL), BW(4), PWR(ON), VDD(3.30v), TIMING(SD_HS)
[ 7.856421] mmc0: new high speed SDHC card at address 1234
[ 7.871391] mmcblk0: mmc0:1234 SA08G 7.25 GiB
[ 7.877651] mmcblk0: p1
[ 9.089793] mtk_soc_eth 1e100000.ethernet: PPE started
[ 12.316347] mount_root: loading kmods from internal overlay
[ 12.359217] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 12.370830] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 13.340960] block: attempting to load /etc/config/fstab
[ 13.391300] block: extroot: not configured
[ 13.396475] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 13.441670] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 13.527693] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[ 13.542882] procd: - early -
[ 13.545866] procd: - watchdog -
[ 14.207798] procd: - watchdog -
[ 14.211528] procd: - ubus -
[ 14.480275] procd: - init -
[ 14.511747] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
[ 14.924377] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.938837] zram: Added device: zram0
[ 14.953276] tun: Universal TUN/TAP device driver, 1.6
[ 14.968117] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.617852] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 16.002679] Netfilter messages via NETLINK v0.30.
[ 16.009890] ip_set: protocol 6
[ 16.053188] u32 classifier
[ 16.055911] input device check on
[ 16.059600] Actions configured
[ 16.065347] Mirror/redirect action on
[ 16.105581] Bridge firewalling registered
[ 16.110580] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 16.118608] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 16.129543] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.715260] ctnetlink v0.93: registering with nfnetlink.
[ 17.130522] usbcore: registered new interface driver ums-alauda
[ 17.139234] usbcore: registered new interface driver ums-cypress
[ 17.147775] usbcore: registered new interface driver ums-datafab
[ 17.156414] usbcore: registered new interface driver ums-freecom
[ 17.164574] usbcore: registered new interface driver ums-isd200
[ 17.173793] usbcore: registered new interface driver ums-jumpshot
[ 17.182373] usbcore: registered new interface driver ums-karma
[ 17.190748] usbcore: registered new interface driver ums-sddr09
[ 17.198780] usbcore: registered new interface driver ums-sddr55
[ 17.206972] usbcore: registered new interface driver ums-usbat
[ 17.264586] xt_time: kernel timezone is -0000
[ 17.707606] bus=0x2, slot = 0x1, irq=0xff
[ 17.711849] mt7603e 0000:02:00.0: ASIC revision: 76030010
[ 17.720679] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[ 17.726249] mt7603e 0000:02:00.0: Build Time: 20160107100755
[ 17.767413] firmware init done
[ 17.935897] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.943341] bus=0x1, slot = 0x0, irq=0xff
[ 17.947668] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 17.977468] mt76x2e 0000:01:00.0: ROM patch already applied
[ 17.984446] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 17.990010] mt76x2e 0000:01:00.0: Build: 1
[ 17.994088] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[ 18.017463] mt76x2e 0000:01:00.0: Firmware running!
[ 18.023797] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 18.032133] PPP generic driver version 2.4.2
[ 18.038495] NET: Registered protocol family 24
[ 18.046381] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 38.836935] mtk_soc_eth 1e100000.ethernet: PPE started
[ 38.851306] device eth0 entered promiscuous mode
[ 38.859973] br-lan: port 1(eth0.1) entered blocking state
[ 38.865417] br-lan: port 1(eth0.1) entered disabled state
[ 38.871966] device eth0.1 entered promiscuous mode
[ 38.881805] br-lan: port 1(eth0.1) entered blocking state
[ 38.887255] br-lan: port 1(eth0.1) entered forwarding state
[ 38.893501] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 39.834048] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 42.361498] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 42.368563] jffs2_build_filesystem(): unlocking the mtd device...
[ 42.368578] done.
[ 42.376723] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 50.672910] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.702442] br-lan: port 2(wlan0) entered blocking state
[ 50.707821] br-lan: port 2(wlan0) entered disabled state
[ 50.713632] device wlan0 entered promiscuous mode
[ 51.139833] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 51.153755] br-lan: port 3(wlan1) entered blocking state
[ 51.164212] br-lan: port 3(wlan1) entered disabled state
[ 51.170661] device wlan1 entered promiscuous mode
[ 51.176263] br-lan: port 3(wlan1) entered blocking state
[ 51.181638] br-lan: port 3(wlan1) entered forwarding state
[ 51.764766] br-lan: port 3(wlan1) entered disabled state
[ 52.493323] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 52.500328] br-lan: port 3(wlan1) entered blocking state
[ 52.505680] br-lan: port 3(wlan1) entered forwarding state
[ 53.137289] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 53.144349] br-lan: port 2(wlan0) entered blocking state
[ 53.149742] br-lan: port 2(wlan0) entered forwarding state
[ 141.341413] done.
[ 141.343382] jffs2: notice: (3500) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 141.873288] overlayfs: upper fs does not support tmpfile.
[ 145.110109] device eth0.2 entered promiscuous mode
[ 1120.422081] zram0: detected capacity change from 0 to 64897024
[ 1120.442214] Adding 63372k swap on /dev/zram0. Priority:10 extents:1 across:63372k SSFS

@openwrt-bot
Copy link
Author

easyteacher:

Two of the warnings are gone. Remain 1.

[ 0.000000] Linux version 4.14.34 (vbox@ubuntu64) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6433+33-4fd8722056)) #0 SMP Fri Apr 20 04:23:50 2018
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Newifi-D1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 805b3f20, node_mem_map 81003000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4b0 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu @8120f000 s26704 r8192 d22448 u57344
[ 0.000000] pcpu-alloc: s26704 r8192 d22448 u57344 alloc=144096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=000444b0
[ 0.000000] Readback ErrCtl register=000444b0
[ 0.000000] Memory: 253220K/262144K available (4613K kernel code, 229K rwdata, 996K rodata, 228K init, 269K bss, 8924K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007805] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.073966] pid_max: default: 32768 minimum: 301
[ 0.078732] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085240] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093954] Hierarchical SRCU implementation.
[ 0.098994] smp: Bringing up secondary CPUs ...
[ 9.413580] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.413589] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.413600] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.413708] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
[ 9.413716] in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
[ 9.413728] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.34 #0
[ 9.413736] Stack : 00000000 00000000 00000000 00000000 805f7afa 00000034 00000000 00000000
[ 9.413767] 8fc441f4 805909c7 8051f6a0 00000001 00000000 00000001 8fc65cb8 b3f6da0b
[ 9.413796] 00000000 00000000 805f0000 0075090c 00000004 804792ac 2083eb6e 004614a2
[ 9.413825] 00000000 80590000 00000035 80620000 00000000 00000000 805b0000 80581274
[ 9.413853] 00000001 00000007 00000000 00000001 00000000 80590000 00000000 00000000
[ 9.413881] ...
[ 9.413891] Call Trace:
[ 9.413930] [<800107e8>] show_stack+0x58/0x100
[ 9.413971] [<804622ec>] dump_stack+0x9c/0xe0
[ 9.413995] [<8005233c>] ___might_sleep+0xf8/0x118
[ 9.414024] [<8047de6c>] mutex_lock+0x24/0x78
[ 9.414056] [<80075000>] __free_irq+0x74/0x308
[ 9.414065] [<80014198>] mips_state_shutdown+0x28/0x40
[ 9.414094] [<80099c34>] clockevents_switch_state+0x124/0x190
[ 9.414104] [<8009a098>] clockevents_exchange_device+0x80/0xa8
[ 9.414115] [<8009aa00>] tick_check_new_device+0xac/0x138
[ 9.414124] [<800993e4>] clockevents_register_device+0xc4/0x138
[ 9.414132] [<80014558>] r4k_clockevent_init+0x250/0x2a8
[ 9.414150] [<8001678c>] start_secondary+0x40/0x3b4
[ 9.414196] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.163725] Synchronize counters for CPU 1: done.
[ 9.261860] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.261871] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.261881] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.261960] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.383700] Synchronize counters for CPU 2: done.
[ 9.351259] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.351267] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.351276] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.351360] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.468871] Synchronize counters for CPU 3: done.
[ 0.498731] smp: Brought up 1 node, 4 CPUs
[ 0.506535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.516325] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.522627] pinctrl core: initialized pinctrl subsystem
[ 0.528379] NET: Registered protocol family 16
[ 0.533142] random: fast init done
[ 0.543574] FPU Affinity set after 11720 emulations
[ 0.545095] pull PCIe RST: RALINK_RSTCTRL = 0
[ 0.849740] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.854772] ***** Xtal 40MHz *****
[ 0.858144] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.863252] Port 0 N_FTS = 1b105000
[ 0.866695] Port 1 N_FTS = 1b105000
[ 0.870154] Port 2 N_FTS = 1b102800
[ 2.024948] PCIE2 no card, disable it(RST&CLK)
[ 2.029292] -> 21007f2
[ 2.031711] PCIE0 enabled
[ 2.034301] PCIE1 enabled
[ 2.036921] PCI host bridge /pcie@1e140000 ranges:
[ 2.041668] MEM 0x0000000060000000..0x000000006fffffff
[ 2.046834] IO 0x000000001e160000..0x000000001e16ffff
[ 2.052035] PCI coherence region base: 0x8fc35cf0, mask/settings: 0x60000000
[ 2.069255] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.075175] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.080927] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.088050] PCI host bridge to bus 0000:00
[ 2.092084] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 2.098938] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 2.104771] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 2.111529] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 2.119422] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 2.119463] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.119475] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[ 2.119540] pci 0000:00:00.0: supports D1
[ 2.119549] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.119809] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 2.119851] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.119868] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[ 2.119929] pci 0000:00:01.0: supports D1
[ 2.119938] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 2.120424] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[ 2.120493] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.120541] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 2.120638] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.120873] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.121115] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[ 2.121168] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.121297] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.121513] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.121606] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 2.121669] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.128182] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.135111] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.141655] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.148587] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.155316] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 2.162512] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 2.169218] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[ 2.175984] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[ 2.182714] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 2.189990] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 2.197130] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.202074] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.208841] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 2.216089] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[ 2.222778] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.227739] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 2.235925] clocksource: Switched to clocksource GIC
[ 2.242389] NET: Registered protocol family 2
[ 2.247510] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.254443] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.260850] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.267265] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.273032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.279522] NET: Registered protocol family 1
[ 2.283842] PCI: CLS 0 bytes, default 32
[ 2.515859] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.522125] Crashlog allocated RAM at address 0x3f00000
[ 2.527526] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 2.539722] zbud: loaded
[ 2.542578] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.548334] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.561197] io scheduler noop registered (default)
[ 2.565959] io scheduler deadline registered
[ 2.570746] gpio-export gpio_export: 2 gpio(s) exported
[ 2.576809] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 2.584214] console [ttyS0] disabled
[ 2.587796] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[ 2.596777] console [ttyS0] enabled
[ 2.603630] bootconsole [early0] disabled
[ 2.612174] cacheinfo: Failed to find cpu0 device node
[ 2.617345] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.624111] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.631526] spi-mt7621 1e000b00.spi: sys_freq: 50000000
[ 2.637741] m25p80 spi0.0: mx25l25635e (32768 Kbytes)
[ 2.642822] 4 fixed-partitions partitions found on MTD device spi0.0
[ 2.649279] Creating 4 MTD partitions on "spi0.0":
[ 2.654058] 0x000000000000-0x000000030000 : "u-boot"
[ 2.659995] 0x000000030000-0x000000040000 : "u-boot-env"
[ 2.666332] 0x000000040000-0x000000050000 : "factory"
[ 2.672239] 0x000000050000-0x000002050000 : "firmware"
[ 2.677399] mtd: partition "firmware" extends beyond the end of device "spi0.0" -- size truncated to 0x1fb0000
[ 2.765277] 2 uimage-fw partitions found on MTD device firmware
[ 2.771242] 0x000000050000-0x00000022573a : "kernel"
[ 2.777388] 0x00000022573a-0x000002000000 : "rootfs"
[ 2.783348] mtd: device 5 (rootfs) set to be root filesystem
[ 2.789123] 1 squashfs-split partitions found on MTD device rootfs
[ 2.795286] 0x000000b20000-0x000002000000 : "rootfs_data"
[ 2.802494] libphy: Fixed MDIO Bus: probed
[ 2.877908] libphy: mdio: probed
[ 4.280719] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.287475] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 4.298397] NET: Registered protocol family 10
[ 4.304446] Segment Routing with IPv6
[ 4.308351] NET: Registered protocol family 17
[ 4.312857] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.325764] 8021q: 802.1Q VLAN Support v1.8
[ 4.330832] zswap: loaded using pool lzo/zbud
[ 4.337114] hctosys: unable to open rtc device (rtc0)
[ 4.348559] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 4.356309] Freeing unused kernel memory: 228K
[ 4.360748] This architecture does not have kernel memory protection.
[ 4.502923] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
[ 4.623511] random: crng init done
[ 6.331998] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[ 6.338127] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[ 6.849648] zram: Added device: zram0
[ 6.913649] zram0: detected capacity change from 0 to 16777216
[ 7.681856] EXT4-fs (zram0): noquota option not supported
[ 7.688878] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: errors=continue,noquota
[ 7.698586] init: Using up to 16384 kB of RAM as ZRAM storage on /mnt
[ 7.707808] init: Console is alive
[ 7.711472] init: - watchdog -
[ 7.745496] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 7.859485] usbcore: registered new interface driver usbfs
[ 7.865053] usbcore: registered new interface driver hub
[ 7.870544] usbcore: registered new device driver usb
[ 7.892575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.906249] SCSI subsystem initialized
[ 7.913708] ehci-platform: EHCI generic platform driver
[ 7.927862] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.933201] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 7.946121] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[ 7.954613] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 7.961390] hub 1-0:1.0: USB hub found
[ 7.965205] hub 1-0:1.0: 2 ports detected
[ 7.969779] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.975113] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 7.982761] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.991724] hub 2-0:1.0: USB hub found
[ 7.995552] hub 2-0:1.0: 1 port detected
[ 8.010026] MTK MSDC device init.
[ 8.013995] SET_IOS: CLK(0kHz), BUS(PUSHPULL), BW(1), PWR(UP), VDD(3.30v), TIMING(LEGACY)
[ 8.035952] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 8.066125] mtk-sd: MediaTek MT6575 MSDC Driver
[ 8.079547] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 8.082149] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 8.087737] sdhci: Secure Digital Host Controller Interface driver
[ 8.087745] sdhci: Copyright(c) Pierre Ossman
[ 8.088825] sdhci-pltfm: SDHCI platform and OF driver helper
[ 8.092330] usbcore: registered new interface driver usb-storage
[ 8.095083] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 8.106254] init: - preinit -
[ 8.135361] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 8.138696] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(LEGACY)
[ 8.185265] SET_IOS: CLK(400kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(SD_HS)
[ 8.193640] SET_IOS: CLK(50000kHz), BUS(PUSHPULL), BW(1), PWR(ON), VDD(3.30v), TIMING(SD_HS)
[ 8.201998] SET_IOS: CLK(50000kHz), BUS(PUSHPULL), BW(4), PWR(ON), VDD(3.30v), TIMING(SD_HS)
[ 8.210460] mmc0: new high speed SDHC card at address 1234
[ 8.225425] mmcblk0: mmc0:1234 SA08G 7.25 GiB
[ 8.231898] mmcblk0: p1 p2
[ 9.386716] mtk_soc_eth 1e100000.ethernet: PPE started
[ 12.618051] mount_root: loading kmods from internal overlay
[ 12.660042] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 12.671424] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 13.428107] block: attempting to load /etc/config/fstab
[ 13.478509] block: extroot: not configured
[ 13.483683] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 13.531722] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 13.617333] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[ 13.632687] procd: - early -
[ 13.635669] procd: - watchdog -
[ 14.134285] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts:
[ 14.306241] procd: - watchdog -
[ 14.309998] procd: - ubus -
[ 14.475392] Adding 1048572k swap on /dev/mmcblk0p1. Priority:-2 extents:1 across:1048572k SSFS
[ 14.717833] procd: - init -
[ 15.101253] kmodloader: loading kernel modules from /etc/modules.d/*
[ 15.119188] tun: Universal TUN/TAP device driver, 1.6
[ 15.134299] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.018954] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 16.411857] Netfilter messages via NETLINK v0.30.
[ 16.419994] ip_set: protocol 6
[ 16.469317] u32 classifier
[ 16.472041] input device check on
[ 16.475687] Actions configured
[ 16.481786] Mirror/redirect action on
[ 16.523343] Bridge firewalling registered
[ 16.528273] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 16.536285] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 16.547150] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.255734] ctnetlink v0.93: registering with nfnetlink.
[ 17.552321] usbcore: registered new interface driver ums-alauda
[ 17.560859] usbcore: registered new interface driver ums-cypress
[ 17.569455] usbcore: registered new interface driver ums-datafab
[ 17.577767] usbcore: registered new interface driver ums-freecom
[ 17.586424] usbcore: registered new interface driver ums-isd200
[ 17.594261] usbcore: registered new interface driver ums-jumpshot
[ 17.601966] usbcore: registered new interface driver ums-karma
[ 17.610012] usbcore: registered new interface driver ums-sddr09
[ 17.617771] usbcore: registered new interface driver ums-sddr55
[ 17.625580] usbcore: registered new interface driver ums-usbat
[ 17.668594] xt_time: kernel timezone is -0000
[ 17.952763] bus=0x2, slot = 0x1, irq=0xff
[ 17.957042] mt7603e 0000:02:00.0: ASIC revision: 76030010
[ 17.966057] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[ 17.971637] mt7603e 0000:02:00.0: Build Time: 20160107100755
[ 18.015922] firmware init done
[ 18.181049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.188704] bus=0x1, slot = 0x0, irq=0xff
[ 18.192977] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 18.216776] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[ 18.226679] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 18.232158] mt76x2e 0000:01:00.0: Build: 1
[ 18.236288] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[ 18.255951] mt76x2e 0000:01:00.0: Firmware running!
[ 18.262195] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 18.270473] PPP generic driver version 2.4.2
[ 18.276659] NET: Registered protocol family 24
[ 18.284319] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 39.729658] mtk_soc_eth 1e100000.ethernet: PPE started
[ 39.746275] device eth0 entered promiscuous mode
[ 39.755074] br-lan: port 1(eth0.1) entered blocking state
[ 39.764628] br-lan: port 1(eth0.1) entered disabled state
[ 39.771544] device eth0.1 entered promiscuous mode
[ 39.781947] br-lan: port 1(eth0.1) entered blocking state
[ 39.787417] br-lan: port 1(eth0.1) entered forwarding state
[ 39.793615] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 40.816690] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 43.264106] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 43.271146] jffs2_build_filesystem(): unlocking the mtd device...
[ 43.271158] done.
[ 43.279713] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 49.971856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.398404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 50.404681] br-lan: port 2(wlan0) entered blocking state
[ 50.410595] br-lan: port 2(wlan0) entered disabled state
[ 50.416731] device wlan0 entered promiscuous mode
[ 50.422100] br-lan: port 3(wlan1) entered blocking state
[ 50.428108] br-lan: port 3(wlan1) entered disabled state
[ 50.434047] device wlan1 entered promiscuous mode
[ 50.439711] br-lan: port 3(wlan1) entered blocking state
[ 50.445023] br-lan: port 3(wlan1) entered forwarding state
[ 51.062484] br-lan: port 3(wlan1) entered disabled state
[ 51.730073] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 51.736776] br-lan: port 3(wlan1) entered blocking state
[ 51.742112] br-lan: port 3(wlan1) entered forwarding state
[ 52.614664] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.621728] br-lan: port 2(wlan0) entered blocking state
[ 52.627129] br-lan: port 2(wlan0) entered forwarding state
[ 141.627886] done.
[ 141.629856] jffs2: notice: (3726) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 142.164175] overlayfs: upper fs does not support tmpfile.
[ 145.423284] device eth0.2 entered promiscuous mode

@aparcar aparcar added the kernel pull request/issue with Linux kernel related changes label Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray kernel pull request/issue with Linux kernel related changes
Projects
None yet
Development

No branches or pull requests

2 participants