OpenWrt/LEDE Project

  • Status Closed
  • Percent Complete
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version lede-17.01
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Roman M. - 07.04.2018
Last edited by Adrian Schmutzler - 19.06.2020

FS#1475 - Belkin F5D8235-4 v1 switch issues, WAN port packet loss

Belkin F5D8235-4 v1 installed with lede-17.01.4-ramips-rt288x-f5d8235-v1-squashfs-sysupgrade.bin
ports 1 and 2 do not auto negotiate to 1Gbit speed, WAN port sets also to 100Mbit and all works fine
when same or additional cabling is used on ports 3 and 4 they negotiate to 1Gbit, but WAN ports stays 100Mbit and 50% packet get lost going out the WAN interface, while LAN communication works fine.
ethtool do not recognize/cannot set/check eth0 so speed and duplex cannot be forced manualy
on factory firmware with same cabling all 5 ports work fine with 1Gbit

if there is anything I can do to fix/test let me know

Closed by  Adrian Schmutzler
19.06.2020 11:21
Reason for closing:  Won't fix
Additional comments about closing:  

LEDE-17.01 has reached EOL (end of life). This bug has been closed automatically. If the problem persists with a newer version, please file an appropriate new bug report for that version.

Sala commented on 08.08.2018 08:07

I confirm that I have the same issue. Only LAN port 3 and 4 is working correctly, so I declares LAN port 4 as WAN and used external gigabit switch on LAN port 3.


Available keyboard shortcuts


Task Details

Task Editing