We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
npcomplete:
Device: EA9500 Openwrt: trunk as of 26-Mar-2018 brcmfmac firmware ver: May 1 2017 12:43:53 version 10.10.122.301 (r658909) FWID 01-1ebebd8a
I don't notice any performance drop or connectivity issues. Just that I can't seem to gauge what speeds are being used etc.
root@OpenWrt:~# iwinfo wlan0 assoclist 00:FC:8B:98:XX:XX unknown / unknown (SNR 0) 7000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown
4C:66:41:AD:XX:XX unknown / unknown (SNR 0) 2000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown root@OpenWrt:~# iwinfo wlan1 assoclist 34:6F:92:05:XX:XX unknown / unknown (SNR 0) 7000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown FC:C2:DE:76:XX:XX unknown / unknown (SNR 0) 26000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown
4C:66:41:AD:XX:XX unknown / unknown (SNR 0) 2000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown
root@OpenWrt:~# iwinfo wlan1 assoclist 34:6F:92:05:XX:XX unknown / unknown (SNR 0) 7000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown
FC:C2:DE:76:XX:XX unknown / unknown (SNR 0) 26000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown
root@OpenWrt:~# iwinfo wlan2 assoclist 30:07:4D:74:XX:XX unknown / unknown (SNR 0) 9000 ms ago RX: unknown 0 Pkts. TX: unknown 0 Pkts. expected throughput: unknown
root@OpenWrt:~# iw phy phy0 info Wiphy phy0 max # scan SSIDs: 10 max scan IEs length: 2048 bytes max # sched scan SSIDs: 0 max # match sets: 0 max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports roaming. Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * P2P-client * P2P-GO * P2P-device Band 2: Capabilities: 0x1062 HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI No RX STBC Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 16 usec (0x07) HT TX/RX MCS rate indexes supported: 0-31 VHT Capabilities (0x0c1b4064): Max MPDU length: 3895 Supported Channel Width: 160 MHz short GI (80 MHz) short GI (160/80+80 MHz) MU Beamformer MU Beamformee VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: MCS 0-9 4 streams: MCS 0-9 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: MCS 0-9 4 streams: MCS 0-9 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Frequencies: * 5170 MHz [34] (disabled) * 5180 MHz [36] (20.0 dBm) * 5190 MHz [38] (20.0 dBm) * 5200 MHz [40] (20.0 dBm) * 5210 MHz [42] (20.0 dBm) * 5220 MHz [44] (20.0 dBm) * 5230 MHz [46] (20.0 dBm) * 5240 MHz [48] (20.0 dBm) * 5260 MHz [52] (20.0 dBm) (radar detection) * 5280 MHz [56] (20.0 dBm) (radar detection) * 5300 MHz [60] (20.0 dBm) (radar detection) * 5320 MHz [64] (20.0 dBm) (radar detection) * 5500 MHz [100] (20.0 dBm) (radar detection) * 5520 MHz [104] (20.0 dBm) (radar detection) * 5540 MHz [108] (20.0 dBm) (radar detection) * 5560 MHz [112] (20.0 dBm) (radar detection) * 5580 MHz [116] (20.0 dBm) (radar detection) * 5600 MHz [120] (20.0 dBm) (radar detection) * 5620 MHz [124] (20.0 dBm) (radar detection) * 5640 MHz [128] (20.0 dBm) (radar detection) * 5660 MHz [132] (20.0 dBm) (radar detection) * 5680 MHz [136] (20.0 dBm) (radar detection) * 5700 MHz [140] (20.0 dBm) (radar detection) * 5720 MHz [144] (20.0 dBm) (radar detection) * 5745 MHz [149] (20.0 dBm) * 5765 MHz [153] (20.0 dBm) * 5785 MHz [157] (20.0 dBm) * 5805 MHz [161] (20.0 dBm) * 5825 MHz [165] (20.0 dBm) valid interface combinations: * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1, total <= 3, #channels <= 1 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1, total <= 4, #channels <= 1 * #{ AP } <= 4, total <= 4, #channels <= 1, STA/AP BI must match
The text was updated successfully, but these errors were encountered:
Attaching firmware used
Sorry, something went wrong.
No branches or pull requests
npcomplete:
Device: EA9500
Openwrt: trunk as of 26-Mar-2018
brcmfmac firmware ver: May 1 2017 12:43:53 version 10.10.122.301 (r658909) FWID 01-1ebebd8a
I don't notice any performance drop or connectivity issues.
Just that I can't seem to gauge what speeds are being used etc.
root@OpenWrt:~# iwinfo wlan0 assoclist
00:FC:8B:98:XX:XX unknown / unknown (SNR 0) 7000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown
4C:66:41:AD:XX:XX unknown / unknown (SNR 0) 2000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown
root@OpenWrt:~# iwinfo wlan1 assoclist
34:6F:92:05:XX:XX unknown / unknown (SNR 0) 7000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown
FC:C2:DE:76:XX:XX unknown / unknown (SNR 0) 26000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown
root@OpenWrt:~# iwinfo wlan2 assoclist
30:07:4D:74:XX:XX unknown / unknown (SNR 0) 9000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown
root@OpenWrt:~# iw phy phy0 info
Wiphy phy0
max # scan SSIDs: 10
max scan IEs length: 2048 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports roaming.
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
* P2P-device
Band 2:
Capabilities: 0x1062
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-31
VHT Capabilities (0x0c1b4064):
Max MPDU length: 3895
Supported Channel Width: 160 MHz
short GI (80 MHz)
short GI (160/80+80 MHz)
MU Beamformer
MU Beamformee
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: MCS 0-9
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: MCS 0-9
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5170 MHz [34] (disabled)
* 5180 MHz [36] (20.0 dBm)
* 5190 MHz [38] (20.0 dBm)
* 5200 MHz [40] (20.0 dBm)
* 5210 MHz [42] (20.0 dBm)
* 5220 MHz [44] (20.0 dBm)
* 5230 MHz [46] (20.0 dBm)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (radar detection)
* 5280 MHz [56] (20.0 dBm) (radar detection)
* 5300 MHz [60] (20.0 dBm) (radar detection)
* 5320 MHz [64] (20.0 dBm) (radar detection)
* 5500 MHz [100] (20.0 dBm) (radar detection)
* 5520 MHz [104] (20.0 dBm) (radar detection)
* 5540 MHz [108] (20.0 dBm) (radar detection)
* 5560 MHz [112] (20.0 dBm) (radar detection)
* 5580 MHz [116] (20.0 dBm) (radar detection)
* 5600 MHz [120] (20.0 dBm) (radar detection)
* 5620 MHz [124] (20.0 dBm) (radar detection)
* 5640 MHz [128] (20.0 dBm) (radar detection)
* 5660 MHz [132] (20.0 dBm) (radar detection)
* 5680 MHz [136] (20.0 dBm) (radar detection)
* 5700 MHz [140] (20.0 dBm) (radar detection)
* 5720 MHz [144] (20.0 dBm) (radar detection)
* 5745 MHz [149] (20.0 dBm)
* 5765 MHz [153] (20.0 dBm)
* 5785 MHz [157] (20.0 dBm)
* 5805 MHz [161] (20.0 dBm)
* 5825 MHz [165] (20.0 dBm)
valid interface combinations:
* #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
total <= 3, #channels <= 1
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
total <= 4, #channels <= 1
* #{ AP } <= 4,
total <= 4, #channels <= 1, STA/AP BI must match
The text was updated successfully, but these errors were encountered: