Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1458 - brcmfmac: Missing stats - Bitrate, Signal / Noise for wifi radios and clients #5839

Open
openwrt-bot opened this issue Mar 26, 2018 · 1 comment
Labels

Comments

@openwrt-bot
Copy link

npcomplete:

Device: EA9500
Openwrt: trunk as of 26-Mar-2018
brcmfmac firmware ver: May 1 2017 12:43:53 version 10.10.122.301 (r658909) FWID 01-1ebebd8a

I don't notice any performance drop or connectivity issues.
Just that I can't seem to gauge what speeds are being used etc.

root@OpenWrt:~# iwinfo wlan0 assoclist
00:FC:8B:98:XX:XX unknown / unknown (SNR 0) 7000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown

4C:66:41:AD:XX:XX unknown / unknown (SNR 0) 2000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown

root@OpenWrt:~# iwinfo wlan1 assoclist
34:6F:92:05:XX:XX unknown / unknown (SNR 0) 7000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown

FC:C2:DE:76:XX:XX unknown / unknown (SNR 0) 26000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown

root@OpenWrt:~# iwinfo wlan2 assoclist
30:07:4D:74:XX:XX unknown / unknown (SNR 0) 9000 ms ago
RX: unknown 0 Pkts.
TX: unknown 0 Pkts.
expected throughput: unknown

root@OpenWrt:~# iw phy phy0 info
Wiphy phy0
max # scan SSIDs: 10
max scan IEs length: 2048 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports roaming.
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
* P2P-device
Band 2:
Capabilities: 0x1062
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-31
VHT Capabilities (0x0c1b4064):
Max MPDU length: 3895
Supported Channel Width: 160 MHz
short GI (80 MHz)
short GI (160/80+80 MHz)
MU Beamformer
MU Beamformee
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: MCS 0-9
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: MCS 0-9
4 streams: MCS 0-9
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5170 MHz [34] (disabled)
* 5180 MHz [36] (20.0 dBm)
* 5190 MHz [38] (20.0 dBm)
* 5200 MHz [40] (20.0 dBm)
* 5210 MHz [42] (20.0 dBm)
* 5220 MHz [44] (20.0 dBm)
* 5230 MHz [46] (20.0 dBm)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (radar detection)
* 5280 MHz [56] (20.0 dBm) (radar detection)
* 5300 MHz [60] (20.0 dBm) (radar detection)
* 5320 MHz [64] (20.0 dBm) (radar detection)
* 5500 MHz [100] (20.0 dBm) (radar detection)
* 5520 MHz [104] (20.0 dBm) (radar detection)
* 5540 MHz [108] (20.0 dBm) (radar detection)
* 5560 MHz [112] (20.0 dBm) (radar detection)
* 5580 MHz [116] (20.0 dBm) (radar detection)
* 5600 MHz [120] (20.0 dBm) (radar detection)
* 5620 MHz [124] (20.0 dBm) (radar detection)
* 5640 MHz [128] (20.0 dBm) (radar detection)
* 5660 MHz [132] (20.0 dBm) (radar detection)
* 5680 MHz [136] (20.0 dBm) (radar detection)
* 5700 MHz [140] (20.0 dBm) (radar detection)
* 5720 MHz [144] (20.0 dBm) (radar detection)
* 5745 MHz [149] (20.0 dBm)
* 5765 MHz [153] (20.0 dBm)
* 5785 MHz [157] (20.0 dBm)
* 5805 MHz [161] (20.0 dBm)
* 5825 MHz [165] (20.0 dBm)
valid interface combinations:
* #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
total <= 3, #channels <= 1
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
total <= 4, #channels <= 1
* #{ AP } <= 4,
total <= 4, #channels <= 1, STA/AP BI must match

@openwrt-bot
Copy link
Author

npcomplete:

Attaching firmware used

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant