We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
marconi:
FYI, I fixed a build bug in gpsd that allows using gpsd with CANbus / NMEA 2000 : FS#783
Now, it would nice to have a way to initialize the CANbus.
For example, the "8 devices USB2CAN" adapter ( https://www.8devices.com/products/usb2can ) needs :
ip link set can0 type can bitrate 250000
... and the CANable adapter ( http://canable.io/ ) needs :
slcan_attach -w -o -c -s5 /dev/ttyACM0 &
ip link set up slcan0
... after that gpsd can be configured with
gpsd.device="nmea2000://slcan0"
... and it should work
The text was updated successfully, but these errors were encountered:
No branches or pull requests
marconi:
FYI, I fixed a build bug in gpsd that allows using gpsd with CANbus / NMEA 2000 : FS#783
Now, it would nice to have a way to initialize the CANbus.
For example, the "8 devices USB2CAN" adapter ( https://www.8devices.com/products/usb2can ) needs :
ip link set can0 type can bitrate 250000
... and the CANable adapter ( http://canable.io/ ) needs :
slcan_attach -w -o -c -s5 /dev/ttyACM0 &
ip link set up slcan0
... after that gpsd can be configured with
gpsd.device="nmea2000://slcan0"
... and it should work
The text was updated successfully, but these errors were encountered: