You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Software versions of OpenWrt/LEDE release, packages, etc.
Steps to reproduce
Device: Yuncore XD3200
Version: LEDE 17.01
Steps to reproduce: Turn on 2.4 GHz radio and measure the TX signal level and data transfer speed.
[[https://forum.lede-project.org/t/xd3200-qca9563-slow-ath9k-2-4ghz-lna-pa/1320|Link to related LEDE forum post]]
"While I’m only getting 18-22MBit (TCP, AP>Client) with the XD3200, the UAP-AC-LITE is stable at 38-45MBit, with the ‘stock’ XD3200 QSDK firmware and proprietary atheros driver I’m getting stable 39-41MBit.
Turrican:
Supply the following if possible:
Device: Yuncore XD3200
Version: LEDE 17.01
Steps to reproduce: Turn on 2.4 GHz radio and measure the TX signal level and data transfer speed.
[[https://forum.lede-project.org/t/xd3200-qca9563-slow-ath9k-2-4ghz-lna-pa/1320|Link to related LEDE forum post]]
"While I’m only getting 18-22MBit (TCP, AP>Client) with the XD3200, the UAP-AC-LITE is stable at 38-45MBit, with the ‘stock’ XD3200 QSDK firmware and proprietary atheros driver I’m getting stable 39-41MBit.
Client readings (AP SNR):
XD3200: -53 dBm
XD3200 QSDK: -41dBm
UAP-AC-LITE: -37dBm
AP readings (Client SNR):
XD3200: -48 dBm / -95 dBm (SNR 47)
XD3200 QSDK: -34 dBm / -95 dBm (SNR 61)
UAP-AC-LITE: -37 dBm / -95 dBm (SNR 58)"
The text was updated successfully, but these errors were encountered: