OpenWrt/LEDE Project

  • Status Closed
  • Percent Complete
    100%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Critical
  • Priority Very Low
  • Reported Version lede-17.01
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by David Gyimesi - 23.02.2018
Last edited by Mathias Kresin - 15.08.2018

FS#1386 - Low 2.4 GHz throughput and TX level on XD3200

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

Device: Yuncore XD3200
Version: LEDE 17.01
Steps to reproduce: Turn on 2.4 GHz radio and measure the TX signal level and data transfer speed.

Link to related LEDE forum post

“While I’m only getting 18-22MBit (TCP, AP>Client) with the XD3200, the UAP-AC-LITE is stable at 38-45MBit, with the ‘stock’ XD3200 QSDK firmware and proprietary atheros driver I’m getting stable 39-41MBit.

Client readings (AP SNR):
XD3200: -53 dBm
XD3200 QSDK: -41dBm
UAP-AC-LITE: -37dBm

AP readings (Client SNR):
XD3200: -48 dBm / -95 dBm (SNR 47)
XD3200 QSDK: -34 dBm / -95 dBm (SNR 61)
UAP-AC-LITE: -37 dBm / -95 dBm (SNR 58)”


Closed by  Mathias Kresin
15.08.2018 20:01
Reason for closing:  Deferred
Additional comments about closing:  

Please test with 18.06 again an reopen the bugreport if the issue persists.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing