Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1360 - Free space: 0% (0.00 B) 8m flash dir-615-h1-squashfs-sysupgrade.bin #6318

Closed
openwrt-bot opened this issue Feb 14, 2018 · 7 comments
Labels

Comments

@openwrt-bot
Copy link

gmfghp:

Supply the following if possible:

  • Device problem occurs on
  • Software versions of OpenWrt/LEDE release, packages, etc.
  • Steps to reproduce

Free space: 0% (0.00 B) 8m flash dir-615-h1-squashfs-sysupgrade.bin、、

AND

dir-620-d1-squashfs-sysupgrade.bin 17.01.4 / targets / ramips / rt305x /

---is so bad Unable to get IP address Can't start、

but releases / 17.01.0 / is ok,

Read less, thank you。

@openwrt-bot
Copy link
Author

gmfghp:

(rt305x-nbg-419n2) is CPU rt3352 this firmware is ok , but (dir 620 d1) cpu rt3352 firmware is not Start The router

so I don't know .It could be. The CPU is different? read less hahaha

(dir-615-h1) can't identify 8 m flash the firmware

I now use this (rt305x-nbg-419n2) firmware is very good, to identify the flash of 8 m

@openwrt-bot
Copy link
Author

mkresin:

Please provide the output of dmesg, logread and df after you booted:

  • dir-615-h1 LEDE 17.01.0 image
  • dir-615-h1 LEDE 17.01.4 image
  • nbg-419n2 LEDE 17.01.4 image

Have you checked if the development snapshot has the same issue?

@openwrt-bot
Copy link
Author

gmfghp:

dir-615-h1 LEDE snapshot

opkg update opkg install luci

Downloading http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-18.051.28524-09ea6db-1_mipsel_24kc.ipk
Installing luci-theme-bootstrap (git-18.051.28524-09ea6db-1) to root...
Configuring liblua.
Configuring libuci-lua.
Configuring rpcd.
Configuring luci-lib-ip.
Configuring libubus-lua.
Configuring lua.
Configuring luci-lib-nixio.
Configuring luci-lib-jsonc.
Configuring luci-base.
Configuring luci-mod-admin-full.
Configuring uhttpd.
Configuring uhttpd-mod-ubus.
Collected errors:

  • verify_pkg_installable: Only have 8kb available on filesystem /overlay, pkg luci-theme-bootstrap needs 13
  • opkg_install_cmd: Cannot install package luci.
  • opkg_conf_write_status_files: Couldn't close //usr/lib/opkg/status: No space left on device.

“The picture” in My post is this router flash is Macronix MX25L6435E @ 13MHz (8MB)

root@OpenWrt:~# dmesg [ 0.000000] Linux version 4.9.82 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6259-6b6dc2b) ) #0 Sat Feb 24 20:33:22 2018 [ 0.000000] SoC Type: Ralink RT3352 id:1 rev:6 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) [ 0.000000] MIPS: machine is D-Link DIR-615 H1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 803fec24, node_mem_map 81000020 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00078eae [ 0.000000] Readback ErrCtl register=00078eae [ 0.000000] Memory: 27896K/32768K available (3202K kernel code, 158K rwdata, 736K rodata, 184K init, 210K bss, 4872K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] CPU Clock: 400MHz [ 0.000000] clocksource_probe: no matching clocksources found [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000017] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.042130] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.155272] pid_max: default: 32768 minimum: 301 [ 0.180246] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.215540] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.262349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.314818] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.347590] pinctrl core: initialized pinctrl subsystem [ 0.378037] NET: Registered protocol family 16 [ 0.443607] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.473234] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.513879] clocksource: Switched to clocksource MIPS [ 0.542691] NET: Registered protocol family 2 [ 0.567486] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.604583] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.638586] TCP: Hash tables configured (established 1024 bind 1024) [ 0.672880] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.704017] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.738033] NET: Registered protocol family 1 [ 0.766496] rt-timer 10000100.timer: maximum frequency is 4069Hz [ 0.799890] Crashlog allocated RAM at address 0x1f00000 [ 0.830496] workingset: timestamp_bits=30 max_order=13 bucket_order=0 [ 0.878591] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.909571] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.985705] io scheduler noop registered [ 1.006403] io scheduler deadline registered (default) [ 1.034392] ralink-usb-phy usbphy: invalid resource [ 1.061241] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 1.100889] console [ttyS0] disabled [ 1.119804] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 1.172947] console [ttyS0] enabled [ 1.186796] bootconsole [early0] disabled [ 1.217720] spi spi0.0: force spi mode3 [ 1.226826] m25p80 spi0.0: mx25l6405d (8192 Kbytes) [ 1.236733] 4 ofpart partitions found on MTD device spi0.0 [ 1.247719] Creating 4 MTD partitions on "spi0.0": [ 1.257332] 0x000000000000-0x000000030000 : "u-boot" [ 1.270294] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.284796] 0x000000040000-0x000000050000 : "factory" [ 1.298574] 0x000000050000-0x000000400000 : "firmware" [ 1.618811] 2 uimage-fw partitions found on MTD device firmware [ 1.630739] 0x000000050000-0x00000019d8bb : "kernel" [ 1.643563] 0x00000019d8bb-0x000000400000 : "rootfs" [ 1.657138] mtd: device 5 (rootfs) set to be root filesystem [ 1.669613] 1 squashfs-split partitions found on MTD device rootfs [ 1.682087] 0x00000035e000-0x000000400000 : "rootfs_data" [ 1.696681] libphy: Fixed MDIO Bus: probed [ 1.711428] rt3050-esw 10110000.esw: link changed 0x00 [ 1.724608] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.742114] rt2880_wdt 10000120.watchdog: Initialized [ 1.754276] NET: Registered protocol family 10 [ 1.769643] NET: Registered protocol family 17 [ 1.778779] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.804702] 8021q: 802.1Q VLAN Support v1.8 [ 1.831147] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.847080] Freeing unused kernel memory: 184K [ 1.856040] This architecture does not have kernel memory protection. [ 3.223902] random: fast init done [ 3.302574] rt3050-esw 10110000.esw: link changed 0x01 [ 3.348295] init: Console is alive [ 3.355747] init: - watchdog - [ 3.581107] rt3050-esw 10110000.esw: link changed 0x11 [ 4.847612] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.130215] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.155599] init: - preinit - [ 6.720752] rt3050-esw 10110000.esw: link changed 0x00 [ 6.782022] 8021q: adding VLAN 0 to HW filter on device eth0 [ 8.326492] rt3050-esw 10110000.esw: link changed 0x01 [ 8.588631] rt3050-esw 10110000.esw: link changed 0x11 [ 10.487075] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 10.522800] mount_root: switching to jffs2 overlay [ 10.584258] urandom-seed: Seeding with /etc/urandom.seed [ 10.773737] procd: - early - [ 10.780201] procd: - watchdog - [ 11.534167] procd: - watchdog - [ 11.541173] procd: - ubus - [ 11.635707] procd: - init - [ 12.309503] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.333726] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.367985] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 12.384090] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 12.405185] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.432989] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 12.553006] xt_time: kernel timezone is -0000 [ 12.660605] PPP generic driver version 2.4.2 [ 12.674306] NET: Registered protocol family 24 [ 12.727953] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 12.742518] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3352, rev 0200 detected [ 12.758042] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000c detected [ 12.772963] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.903506] kmodloader: done loading kernel modules from /etc/modules.d/* [ 18.190752] rt3050-esw 10110000.esw: link changed 0x00 [ 19.796835] rt3050-esw 10110000.esw: link changed 0x01 [ 19.993444] rt3050-esw 10110000.esw: link changed 0x11 [ 25.950612] 8021q: adding VLAN 0 to HW filter on device eth0 [ 25.996611] br-lan: port 1(eth0.1) entered blocking state [ 26.007537] br-lan: port 1(eth0.1) entered disabled state [ 26.019103] device eth0.1 entered promiscuous mode [ 26.028790] device eth0 entered promiscuous mode [ 26.127804] br-lan: port 1(eth0.1) entered blocking state [ 26.138699] br-lan: port 1(eth0.1) entered forwarding state [ 26.150237] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 26.994345] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 90.608564] random: crng init done root@OpenWrt:~# logread Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 0.000000] Linux version 4.9.82 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6259-6b6dc2b) ) #0 Sat Feb 24 20:33:22 2018 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] SoC Type: Ralink RT3352 id:1 rev:6 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] MIPS: machine is D-Link DIR-615 H1 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Determined physical RAM map: Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd Sun Feb 25 08:37:12 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Sun Feb 25 08:37:12 2018 kern.warn kernel: [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Zone ranges: Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Movable zone start for each node Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Early memory node ranges Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192 Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 803fec24, node_mem_map 81000020 Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00078eae Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00078eae Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] Memory: 27896K/32768K available (3202K kernel code, 158K rwdata, 736K rodata, 184K init, 210K bss, 4872K reserved, 0K cma-reserved) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] NR_IRQS:256 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] CPU Clock: 400MHz Sun Feb 25 08:37:12 2018 kern.crit kernel: [ 0.000000] clocksource_probe: no matching clocksources found Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.000017] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.042130] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.155272] pid_max: default: 32768 minimum: 301 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.180246] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.215540] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.262349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.314818] futex hash table entries: 256 (order: -1, 3072 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.347590] pinctrl core: initialized pinctrl subsystem Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.378037] NET: Registered protocol family 16 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.443607] rt2880_gpio 10000600.gpio: registering 24 gpios Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.473234] rt2880_gpio 10000600.gpio: registering 24 irq handlers Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.513879] clocksource: Switched to clocksource MIPS Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.542691] NET: Registered protocol family 2 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.567486] TCP established hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.604583] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.638586] TCP: Hash tables configured (established 1024 bind 1024) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.672880] UDP hash table entries: 256 (order: 0, 4096 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.704017] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.738033] NET: Registered protocol family 1 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.766496] rt-timer 10000100.timer: maximum frequency is 4069Hz Sun Feb 25 08:37:12 2018 kern.warn kernel: [ 0.799890] Crashlog allocated RAM at address 0x1f00000 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.830496] workingset: timestamp_bits=30 max_order=13 bucket_order=0 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.878591] squashfs: version 4.0 (2009/01/31) Phillip Lougher Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.909571] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Sun Feb 25 08:37:12 2018 kern.info kernel: [ 0.985705] io scheduler noop registered Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.006403] io scheduler deadline registered (default) Sun Feb 25 08:37:12 2018 kern.err kernel: [ 1.034392] ralink-usb-phy usbphy: invalid resource Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.061241] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.100889] console [ttyS0] disabled Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.119804] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.172947] console [ttyS0] enabled Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.186796] bootconsole [early0] disabled Sun Feb 25 08:37:12 2018 kern.warn kernel: [ 1.217720] spi spi0.0: force spi mode3 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.226826] m25p80 spi0.0: mx25l6405d (8192 Kbytes) Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.236733] 4 ofpart partitions found on MTD device spi0.0 Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.247719] Creating 4 MTD partitions on "spi0.0": Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.257332] 0x000000000000-0x000000030000 : "u-boot" Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.270294] 0x000000030000-0x000000040000 : "u-boot-env" Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.284796] 0x000000040000-0x000000050000 : "factory" Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.298574] 0x000000050000-0x000000400000 : "firmware" Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.618811] 2 uimage-fw partitions found on MTD device firmware Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.630739] 0x000000050000-0x00000019d8bb : "kernel" Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.643563] 0x00000019d8bb-0x000000400000 : "rootfs" Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.657138] mtd: device 5 (rootfs) set to be root filesystem Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.669613] 1 squashfs-split partitions found on MTD device rootfs Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 1.682087] 0x00000035e000-0x000000400000 : "rootfs_data" Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.696681] libphy: Fixed MDIO Bus: probed Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.711428] rt3050-esw 10110000.esw: link changed 0x00 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.724608] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.742114] rt2880_wdt 10000120.watchdog: Initialized Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.754276] NET: Registered protocol family 10 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.769643] NET: Registered protocol family 17 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.778779] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.804702] 8021q: 802.1Q VLAN Support v1.8 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.831147] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Sun Feb 25 08:37:12 2018 kern.info kernel: [ 1.847080] Freeing unused kernel memory: 184K Sun Feb 25 08:37:12 2018 kern.warn kernel: [ 1.856040] This architecture does not have kernel memory protection. Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 3.223902] random: fast init done Sun Feb 25 08:37:12 2018 kern.info kernel: [ 3.302574] rt3050-esw 10110000.esw: link changed 0x01 Sun Feb 25 08:37:12 2018 user.info kernel: [ 3.348295] init: Console is alive Sun Feb 25 08:37:12 2018 user.info kernel: [ 3.355747] init: - watchdog - Sun Feb 25 08:37:12 2018 kern.info kernel: [ 3.581107] rt3050-esw 10110000.esw: link changed 0x11 Sun Feb 25 08:37:12 2018 user.info kernel: [ 4.847612] kmodloader: loading kernel modules from /etc/modules-boot.d/* Sun Feb 25 08:37:12 2018 user.info kernel: [ 5.130215] kmodloader: done loading kernel modules from /etc/modules-boot.d/* Sun Feb 25 08:37:12 2018 user.info kernel: [ 5.155599] init: - preinit - Sun Feb 25 08:37:12 2018 kern.info kernel: [ 6.720752] rt3050-esw 10110000.esw: link changed 0x00 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 6.782022] 8021q: adding VLAN 0 to HW filter on device eth0 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 8.326492] rt3050-esw 10110000.esw: link changed 0x01 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 8.588631] rt3050-esw 10110000.esw: link changed 0x11 Sun Feb 25 08:37:12 2018 kern.notice kernel: [ 10.487075] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Sun Feb 25 08:37:12 2018 user.info kernel: [ 10.522800] mount_root: switching to jffs2 overlay Sun Feb 25 08:37:12 2018 user.warn kernel: [ 10.584258] urandom-seed: Seeding with /etc/urandom.seed Sun Feb 25 08:37:12 2018 user.info kernel: [ 10.773737] procd: - early - Sun Feb 25 08:37:12 2018 user.info kernel: [ 10.780201] procd: - watchdog - Sun Feb 25 08:37:12 2018 user.info kernel: [ 11.534167] procd: - watchdog - Sun Feb 25 08:37:12 2018 user.info kernel: [ 11.541173] procd: - ubus - Sun Feb 25 08:37:12 2018 user.info kernel: [ 11.635707] procd: - init - Sun Feb 25 08:37:12 2018 user.info kernel: [ 12.309503] kmodloader: loading kernel modules from /etc/modules.d/* Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.333726] ip6_tables: (C) 2000-2006 Netfilter Core Team Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.367985] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.384090] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.405185] ip_tables: (C) 2000-2006 Netfilter Core Team Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.432989] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.553006] xt_time: kernel timezone is -0000 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.660605] PPP generic driver version 2.4.2 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.674306] NET: Registered protocol family 24 Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.727953] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.742518] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3352, rev 0200 detected Sun Feb 25 08:37:12 2018 kern.info kernel: [ 12.758042] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000c detected Sun Feb 25 08:37:12 2018 kern.debug kernel: [ 12.772963] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Sun Feb 25 08:37:12 2018 user.info kernel: [ 12.903506] kmodloader: done loading kernel modules from /etc/modules.d/* Sun Feb 25 08:37:14 2018 kern.info kernel: [ 18.190752] rt3050-esw 10110000.esw: link changed 0x00 Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: tunnel Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: Network device Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: bridge Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: veth Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: macvlan Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: 8021ad Sun Feb 25 08:37:15 2018 user.notice : Added device handler type: 8021q Sun Feb 25 08:37:15 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled Sun Feb 25 08:37:15 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled Sun Feb 25 08:37:15 2018 kern.info kernel: [ 19.796835] rt3050-esw 10110000.esw: link changed 0x01 Sun Feb 25 08:37:15 2018 kern.info kernel: [ 19.993444] rt3050-esw 10110000.esw: link changed 0x11 Sun Feb 25 08:37:18 2018 authpriv.info dropbear[756]: Not backgrounding Sun Feb 25 08:37:20 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led Status LED (amber) Sun Feb 25 08:37:21 2018 kern.info kernel: [ 25.950612] 8021q: adding VLAN 0 to HW filter on device eth0 Sun Feb 25 08:37:22 2018 kern.info kernel: [ 25.996611] br-lan: port 1(eth0.1) entered blocking state Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.007537] br-lan: port 1(eth0.1) entered disabled state Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.019103] device eth0.1 entered promiscuous mode Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.028790] device eth0 entered promiscuous mode Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.127804] br-lan: port 1(eth0.1) entered blocking state Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.138699] br-lan: port 1(eth0.1) entered forwarding state Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.150237] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'lan' is enabled Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'lan' is setting up now Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'lan' is now up Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'loopback' is enabled Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'loopback' is setting up now Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'loopback' is now up Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'wan' is enabled Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'wan6' is enabled Sun Feb 25 08:37:22 2018 daemon.notice netifd: bridge 'br-lan' link is up Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'lan' has link connectivity Sun Feb 25 08:37:22 2018 daemon.notice netifd: Network device 'eth0' link is up Sun Feb 25 08:37:22 2018 daemon.notice netifd: VLAN 'eth0.1' link is up Sun Feb 25 08:37:22 2018 daemon.notice netifd: Network device 'lo' link is up Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'loopback' has link connectivity Sun Feb 25 08:37:22 2018 daemon.notice netifd: VLAN 'eth0.2' link is up Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'wan' has link connectivity Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'wan' is setting up now Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'wan6' has link connectivity Sun Feb 25 08:37:22 2018 daemon.notice netifd: Interface 'wan6' is setting up now Sun Feb 25 08:37:22 2018 daemon.warn odhcpd[698]: DHCPV6 SOLICIT IA_NA from 000100011f841be91234567890a1 on br-lan: ok fd61:9199:8aca::923/128 Sun Feb 25 08:37:22 2018 kern.info kernel: [ 26.994345] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready Sun Feb 25 08:37:23 2018 daemon.notice netifd: wan (911): udhcpc: started, v1.27.2 Sun Feb 25 08:37:23 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Sun Feb 25 08:37:24 2018 daemon.warn odhcpd[698]: DHCPV6 SOLICIT IA_NA from 000100011f841be91234567890a1 on br-lan: ok fd61:9199:8aca::923/128 Sun Feb 25 08:37:24 2018 daemon.warn odhcpd[698]: DHCPV6 REQUEST IA_NA from 000100011f841be91234567890a1 on br-lan: ok fd61:9199:8aca::923/128 Sun Feb 25 08:37:24 2018 daemon.notice netifd: wan (911): udhcpc: sending discover Sun Feb 25 08:37:25 2018 daemon.info procd: - init complete - Sun Feb 25 08:37:26 2018 daemon.warn odhcpd[698]: DHCPV6 CONFIRM IA_NA from 000100011f841be91234567890a1 on br-lan: not on-link fd61:9199:8aca::923/128 Sun Feb 25 08:37:26 2018 daemon.warn odhcpd[698]: DHCPV6 SOLICIT IA_NA from 000100011f841be91234567890a1 on br-lan: ok fd61:9199:8aca::923/128 Sun Feb 25 08:37:27 2018 daemon.notice netifd: wan (911): udhcpc: sending discover Sun Feb 25 08:37:27 2018 daemon.warn odhcpd[698]: DHCPV6 REQUEST IA_NA from 000100011f841be91234567890a1 on br-lan: ok fd61:9199:8aca::923/128 Sun Feb 25 08:37:27 2018 daemon.notice netifd: wan (911): udhcpc: sending select for 192.168.3.158 Sun Feb 25 08:37:27 2018 daemon.notice netifd: wan (911): udhcpc: lease of 192.168.3.158 obtained, lease time 43200 Sun Feb 25 08:37:27 2018 daemon.notice netifd: Interface 'wan6' is now up Sun Feb 25 08:37:28 2018 daemon.notice netifd: Interface 'wan' is now up Sun Feb 25 08:37:28 2018 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2) Sun Feb 25 08:37:29 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2) Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: started, version 2.79rc1 cachesize 150 Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: DNS service limited to local subnets Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify Sun Feb 25 08:37:30 2018 daemon.info dnsmasq-dhcp[1166]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain test Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain onion Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain localhost Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain local Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain invalid Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain example.net Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain example.org Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain example.com Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using 3 more local addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: reading /tmp/resolv.conf.auto Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain test Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain onion Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain localhost Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain local Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain invalid Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain example.net Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain example.org Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using local addresses only for domain example.com Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using nameserver 192.168.3.1#53 Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using nameserver fded:a4:f1db::1#53 Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: using 3 more local addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: read /etc/hosts - 4 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: read /tmp/hosts/odhcpd - 2 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq-dhcp[1166]: read /etc/ethers - 0 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: read /etc/hosts - 4 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: read /tmp/hosts/odhcpd - 2 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq[1166]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Sun Feb 25 08:37:30 2018 daemon.info dnsmasq-dhcp[1166]: read /etc/ethers - 0 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1166]: exiting on receipt of SIGTERM Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: started, version 2.79rc1 cachesize 150 Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: DNS service limited to local subnets Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify Sun Feb 25 08:37:32 2018 daemon.info dnsmasq-dhcp[1268]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain test Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain onion Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain localhost Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain local Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain invalid Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain example.net Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain example.org Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain example.com Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using 3 more local addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: reading /tmp/resolv.conf.auto Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain test Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain onion Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain localhost Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain local Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain invalid Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain example.net Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain example.org Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using local addresses only for domain example.com Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using nameserver 192.168.3.1#53 Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using nameserver fded:a4:f1db::1#53 Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: using 3 more local addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: read /etc/hosts - 4 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: read /tmp/hosts/odhcpd - 2 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq-dhcp[1268]: read /etc/ethers - 0 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: read /etc/hosts - 4 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: read /tmp/hosts/odhcpd - 2 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq[1268]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Sun Feb 25 08:37:32 2018 daemon.info dnsmasq-dhcp[1268]: read /etc/ethers - 0 addresses Sun Feb 25 08:47:50 2018 daemon.info dnsmasq-dhcp[1268]: DHCPREQUEST(br-lan) 192.168.3.207 Sun Feb 25 08:47:50 2018 daemon.info dnsmasq-dhcp[1268]: DHCPNAK(br-lan) 192.168.3.207 wrong network Sun Feb 25 08:47:53 2018 daemon.info dnsmasq-dhcp[1268]: DHCPDISCOVER(br-lan) Sun Feb 25 08:47:53 2018 daemon.info dnsmasq-dhcp[1268]: DHCPOFFER(br-lan) 192.168.1.207 12:34:56:78:90:b1 Sun Feb 25 08:47:53 2018 daemon.info dnsmasq-dhcp[1268]: DHCPREQUEST(br-lan) 192.168.1.207 Sun Feb 25 08:47:53 2018 daemon.info dnsmasq-dhcp[1268]: DHCPACK(br-lan) 192.168.1.207 Sun Feb 25 08:48:41 2018 kern.notice kernel: [ 90.608564] random: crng init done Sun Feb 25 08:48:44 2018 authpriv.info dropbear[1303]: Child connection from 192.168.1.207:52128 Sun Feb 25 08:49:11 2018 authpriv.notice dropbear[1303]: Auth succeeded with blank password for 'root' from 192.168.1.207:52128 root@OpenWrt:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 1792 1792 0 100% /rom tmpfs 14040 76 13964 1% /tmp /dev/mtdblock6 648 640 8 99% /overlay overlayfs:/overlay 648 640 8 99% / tmpfs 512 0 512 0% /dev

@openwrt-bot
Copy link
Author

gmfghp:

this is "nbg-419n2 LEDE 17.01.4 image"

root@LEDE:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 2304 2304 0 100% /rom tmpfs 14404 616 13788 4% /tmp /dev/mtdblock6 4648 860 3788 19% /overlay overlayfs:/overlay 4648 860 3788 19% / tmpfs 512 0 512 0% /dev root@LEDE:~# dmesg [ 0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3556-46e29bd) ) #0 Mon Oct 16 15:21:43 2017 [ 0.000000] SoC Type: Ralink RT3352 id:1 rev:6 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) [ 0.000000] MIPS: machine is ZyXEL NBG-419N v2 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 803344b0, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=0007ae88 [ 0.000000] Readback ErrCtl register=0007ae88 [ 0.000000] Memory: 28612K/32768K available (2892K kernel code, 132K rwdata, 356K rodata, 196K init, 196K bss, 4156K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] CPU Clock: 400MHz [ 0.000000] clocksource_probe: no matching clocksources found [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000015] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.042122] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.155273] pid_max: default: 32768 minimum: 301 [ 0.180260] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.215549] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.261583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.314052] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.346815] pinctrl core: initialized pinctrl subsystem [ 0.376984] NET: Registered protocol family 16 [ 0.408519] Can't analyze schedule() prologue at 8000acdc [ 0.464039] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.493657] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.529144] clocksource: Switched to clocksource MIPS [ 0.557917] NET: Registered protocol family 2 [ 0.582748] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.619847] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.653854] TCP: Hash tables configured (established 1024 bind 1024) [ 0.688140] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.719285] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.753291] NET: Registered protocol family 1 [ 0.785445] rt-timer 10000100.timer: maximum frequency is 4069Hz [ 0.818804] Crashlog allocated RAM at address 0x1f00000 [ 0.878984] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.909957] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.967734] io scheduler noop registered [ 0.988430] io scheduler deadline registered (default) [ 1.016305] ralink-usb-phy usbphy: invalid resource [ 1.043155] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 1.083174] console [ttyS0] disabled [ 1.102084] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 1.155241] console [ttyS0] enabled [ 1.169086] bootconsole [early0] disabled [ 1.198675] spi spi0.0: force spi mode3 [ 1.207230] m25p80 spi0.0: mx25l6405d (8192 Kbytes) [ 1.217134] 4 ofpart partitions found on MTD device spi0.0 [ 1.228127] Creating 4 MTD partitions on "spi0.0": [ 1.237769] 0x000000000000-0x000000030000 : "u-boot" [ 1.251184] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.265371] 0x000000040000-0x000000050000 : "factory" [ 1.279018] 0x000000050000-0x000000800000 : "firmware" [ 1.838471] 2 uimage-fw partitions found on MTD device firmware [ 1.850400] 0x000000050000-0x00000016b499 : "kernel" [ 1.863300] 0x00000016b499-0x000000800000 : "rootfs" [ 1.876692] mtd: device 5 (rootfs) set to be root filesystem [ 1.888268] 1 squashfs-split partitions found on MTD device rootfs [ 1.900685] 0x000000376000-0x000000800000 : "rootfs_data" [ 1.920518] rt3050-esw 10110000.esw: link changed 0x00 [ 1.933959] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.951493] rt2880_wdt 10000120.watchdog: Initialized [ 1.963948] NET: Registered protocol family 10 [ 1.979821] NET: Registered protocol family 17 [ 1.988849] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.014106] 8021q: 802.1Q VLAN Support v1.8 [ 2.038687] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 2.054734] Freeing unused kernel memory: 196K [ 3.511357] rt3050-esw 10110000.esw: link changed 0x01 [ 4.180780] init: Console is alive [ 4.188068] init: - watchdog - [ 5.583535] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.716014] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.741330] init: - preinit - [ 6.988409] rt3050-esw 10110000.esw: link changed 0x00 [ 7.046133] 8021q: adding VLAN 0 to HW filter on device eth0 [ 7.288498] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available) [ 8.594148] rt3050-esw 10110000.esw: link changed 0x01 [ 11.075626] jffs2: notice: (314) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 11.113838] mount_root: switching to jffs2 overlay [ 11.146214] urandom-seed: Seeding with /etc/urandom.seed [ 11.362375] procd: - early - [ 11.368379] procd: - watchdog - [ 12.019962] procd: - watchdog - [ 12.026948] procd: - ubus - [ 12.258105] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.388776] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.407764] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.426034] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.445685] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.463925] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.482561] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.501943] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.521556] procd: - init - [ 13.807783] kmodloader: loading kernel modules from /etc/modules.d/* [ 13.831272] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.860121] Netfilter messages via NETLINK v0.30. [ 13.897478] ip_set: protocol 6 [ 14.187720] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f [ 14.203843] Backport generated by backports.git backports-20160324-13-g24da7d3c [ 14.226435] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.255199] nf_conntrack version 0.5.0 (450 buckets, 1800 max) [ 14.393722] xt_time: kernel timezone is -0000 [ 14.508902] PPP generic driver version 2.4.2 [ 14.522759] NET: Registered protocol family 24 [ 14.581482] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 14.596045] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3352, rev 0200 detected [ 14.611588] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000c detected [ 14.626522] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.755765] kmodloader: done loading kernel modules from /etc/modules.d/* [ 16.475446] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available) [ 19.392120] rt3050-esw 10110000.esw: link changed 0x00 [ 21.000626] rt3050-esw 10110000.esw: link changed 0x01 [ 26.540995] 8021q: adding VLAN 0 to HW filter on device eth0 [ 26.598947] device eth0.1 entered promiscuous mode [ 26.608678] device eth0 entered promiscuous mode [ 26.672340] br-lan: port 1(eth0.1) entered forwarding state [ 26.683661] br-lan: port 1(eth0.1) entered forwarding state [ 28.679248] br-lan: port 1(eth0.1) entered forwarding state [ 37.832885] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready [ 37.867965] device wlan0-1 entered promiscuous mode [ 38.657527] device wlan0-2 entered promiscuous mode [ 38.693292] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready root@LEDE-FX:~# logread Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3556-46e29bd) ) #0 Mon Oct 16 15:21:43 2017 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] SoC Type: Ralink RT3352 id:1 rev:6 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] MIPS: machine is ZyXEL NBG-419N v2 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Determined physical RAM map: Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Zone ranges: Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Movable zone start for each node Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Early memory node ranges Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192 Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 803344b0, node_mem_map 81000000 Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 Sun Feb 25 12:20:21 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Sun Feb 25 12:20:21 2018 kern.warn kernel: [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=0007ae88 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=0007ae88 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] Memory: 28612K/32768K available (2892K kernel code, 132K rwdata, 356K rodata, 196K init, 196K bss, 4156K reserved, 0K cma-reserved) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] NR_IRQS:256 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] CPU Clock: 400MHz Sun Feb 25 12:20:21 2018 kern.crit kernel: [ 0.000000] clocksource_probe: no matching clocksources found Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.000015] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.042122] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.155273] pid_max: default: 32768 minimum: 301 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.180260] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.215549] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.261583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.314052] futex hash table entries: 256 (order: -1, 3072 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.346815] pinctrl core: initialized pinctrl subsystem Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.376984] NET: Registered protocol family 16 Sun Feb 25 12:20:21 2018 kern.warn kernel: [ 0.408519] Can't analyze schedule() prologue at 8000acdc Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.464039] rt2880_gpio 10000600.gpio: registering 24 gpios Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.493657] rt2880_gpio 10000600.gpio: registering 24 irq handlers Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.529144] clocksource: Switched to clocksource MIPS Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.557917] NET: Registered protocol family 2 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.582748] TCP established hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.619847] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.653854] TCP: Hash tables configured (established 1024 bind 1024) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.688140] UDP hash table entries: 256 (order: 0, 4096 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.719285] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.753291] NET: Registered protocol family 1 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.785445] rt-timer 10000100.timer: maximum frequency is 4069Hz Sun Feb 25 12:20:21 2018 kern.warn kernel: [ 0.818804] Crashlog allocated RAM at address 0x1f00000 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.878984] squashfs: version 4.0 (2009/01/31) Phillip Lougher Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.909957] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.967734] io scheduler noop registered Sun Feb 25 12:20:21 2018 kern.info kernel: [ 0.988430] io scheduler deadline registered (default) Sun Feb 25 12:20:21 2018 kern.err kernel: [ 1.016305] ralink-usb-phy usbphy: invalid resource Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.043155] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.083174] console [ttyS0] disabled Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.102084] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.155241] console [ttyS0] enabled Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.169086] bootconsole [early0] disabled Sun Feb 25 12:20:21 2018 kern.warn kernel: [ 1.198675] spi spi0.0: force spi mode3 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.207230] m25p80 spi0.0: mx25l6405d (8192 Kbytes) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.217134] 4 ofpart partitions found on MTD device spi0.0 Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.228127] Creating 4 MTD partitions on "spi0.0": Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.237769] 0x000000000000-0x000000030000 : "u-boot" Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.251184] 0x000000030000-0x000000040000 : "u-boot-env" Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.265371] 0x000000040000-0x000000050000 : "factory" Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.279018] 0x000000050000-0x000000800000 : "firmware" Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.838471] 2 uimage-fw partitions found on MTD device firmware Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.850400] 0x000000050000-0x00000016b499 : "kernel" Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.863300] 0x00000016b499-0x000000800000 : "rootfs" Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.876692] mtd: device 5 (rootfs) set to be root filesystem Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.888268] 1 squashfs-split partitions found on MTD device rootfs Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 1.900685] 0x000000376000-0x000000800000 : "rootfs_data" Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.920518] rt3050-esw 10110000.esw: link changed 0x00 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.933959] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.951493] rt2880_wdt 10000120.watchdog: Initialized Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.963948] NET: Registered protocol family 10 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.979821] NET: Registered protocol family 17 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 1.988849] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Sun Feb 25 12:20:21 2018 kern.info kernel: [ 2.014106] 8021q: 802.1Q VLAN Support v1.8 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 2.038687] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Sun Feb 25 12:20:21 2018 kern.info kernel: [ 2.054734] Freeing unused kernel memory: 196K Sun Feb 25 12:20:21 2018 kern.info kernel: [ 3.511357] rt3050-esw 10110000.esw: link changed 0x01 Sun Feb 25 12:20:21 2018 user.info kernel: [ 4.180780] init: Console is alive Sun Feb 25 12:20:21 2018 user.info kernel: [ 4.188068] init: - watchdog - Sun Feb 25 12:20:21 2018 user.info kernel: [ 5.583535] kmodloader: loading kernel modules from /etc/modules-boot.d/* Sun Feb 25 12:20:21 2018 user.info kernel: [ 5.716014] kmodloader: done loading kernel modules from /etc/modules-boot.d/* Sun Feb 25 12:20:21 2018 user.info kernel: [ 5.741330] init: - preinit - Sun Feb 25 12:20:21 2018 kern.info kernel: [ 6.988409] rt3050-esw 10110000.esw: link changed 0x00 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 7.046133] 8021q: adding VLAN 0 to HW filter on device eth0 Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 7.288498] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 8.594148] rt3050-esw 10110000.esw: link changed 0x01 Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 11.075626] jffs2: notice: (314) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Sun Feb 25 12:20:21 2018 user.info kernel: [ 11.113838] mount_root: switching to jffs2 overlay Sun Feb 25 12:20:21 2018 user.warn kernel: [ 11.146214] urandom-seed: Seeding with /etc/urandom.seed Sun Feb 25 12:20:21 2018 user.info kernel: [ 11.362375] procd: - early - Sun Feb 25 12:20:21 2018 user.info kernel: [ 11.368379] procd: - watchdog - Sun Feb 25 12:20:21 2018 user.info kernel: [ 12.019962] procd: - watchdog - Sun Feb 25 12:20:21 2018 user.info kernel: [ 12.026948] procd: - ubus - Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.258105] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.388776] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.407764] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.426034] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.445685] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.463925] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.482561] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 12.501943] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) Sun Feb 25 12:20:21 2018 user.info kernel: [ 12.521556] procd: - init - Sun Feb 25 12:20:21 2018 user.info kernel: [ 13.807783] kmodloader: loading kernel modules from /etc/modules.d/* Sun Feb 25 12:20:21 2018 kern.info kernel: [ 13.831272] ip6_tables: (C) 2000-2006 Netfilter Core Team Sun Feb 25 12:20:21 2018 kern.info kernel: [ 13.860121] Netfilter messages via NETLINK v0.30. Sun Feb 25 12:20:21 2018 kern.info kernel: [ 13.897478] ip_set: protocol 6 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.187720] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.203843] Backport generated by backports.git backports-20160324-13-g24da7d3c Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.226435] ip_tables: (C) 2000-2006 Netfilter Core Team Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.255199] nf_conntrack version 0.5.0 (450 buckets, 1800 max) Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.393722] xt_time: kernel timezone is -0000 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.508902] PPP generic driver version 2.4.2 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.522759] NET: Registered protocol family 24 Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.581482] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.596045] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3352, rev 0200 detected Sun Feb 25 12:20:21 2018 kern.info kernel: [ 14.611588] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000c detected Sun Feb 25 12:20:21 2018 kern.debug kernel: [ 14.626522] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Sun Feb 25 12:20:21 2018 user.info kernel: [ 14.755765] kmodloader: done loading kernel modules from /etc/modules.d/* Sun Feb 25 12:20:21 2018 kern.notice kernel: [ 16.475446] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available) Sun Feb 25 12:20:23 2018 kern.info kernel: [ 19.392120] rt3050-esw 10110000.esw: link changed 0x00 Sun Feb 25 12:20:24 2018 user.notice : Added device handler type: 8021ad Sun Feb 25 12:20:24 2018 user.notice : Added device handler type: 8021q Sun Feb 25 12:20:24 2018 user.notice : Added device handler type: macvlan Sun Feb 25 12:20:24 2018 user.notice : Added device handler type: bridge Sun Feb 25 12:20:24 2018 user.notice : Added device handler type: Network device Sun Feb 25 12:20:24 2018 user.notice : Added device handler type: tunnel Sun Feb 25 12:20:25 2018 kern.info kernel: [ 21.000626] rt3050-esw 10110000.esw: link changed 0x01 Sun Feb 25 12:20:27 2018 authpriv.info dropbear[697]: Not backgrounding Sun Feb 25 12:20:28 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wps Sun Feb 25 12:20:28 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi Sun Feb 25 12:20:30 2018 kern.info kernel: [ 26.540995] 8021q: adding VLAN 0 to HW filter on device eth0 Sun Feb 25 12:20:30 2018 kern.info kernel: [ 26.598947] device eth0.1 entered promiscuous mode Sun Feb 25 12:20:30 2018 kern.info kernel: [ 26.608678] device eth0 entered promiscuous mode Sun Feb 25 12:20:30 2018 kern.info kernel: [ 26.672340] br-lan: port 1(eth0.1) entered forwarding state Sun Feb 25 12:20:30 2018 kern.info kernel: [ 26.683661] br-lan: port 1(eth0.1) entered forwarding state Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'lan' is enabled Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'lan' is setting up now Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'lan' is now up Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'loopback' is enabled Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'loopback' is setting up now Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'loopback' is now up Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'wan' is enabled Sun Feb 25 12:20:30 2018 daemon.notice netifd: bridge 'br-lan' link is up Sun Feb 25 12:20:30 2018 daemon.notice netifd: Interface 'lan' has link connectivity

@openwrt-bot
Copy link
Author

mkresin:

Could it be that you have done a hardware modification and changed the flash chip of the DIR-615 H1? According to our [[https://wiki.openwrt.org/toh/hwdata/d-link/d-link_dir-615_h1|techdata]] and [[https://wikidevi.com/wiki/D-Link_DIR-615_series|wikidevi]] the DIR-615 H1 has 4 MByte flash chip.

The MX25L6435E is detected correctly in both bootlogs. But the DIR-615 H1 has a [[https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/dts/DIR-615-H1.dts#L64|partition map]] for a 4 MByte flash chip (check the size of the firmware partition).

The NBG-419N v2 has a 8 MByte chip and hence a [[https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/dts/NBG-419N2.dts#L13|partition map]] for a 8 MByte chip.

@openwrt-bot
Copy link
Author

gmfghp:

谢谢。
Yes I have done a hardware modification and changed the flash chip for 8 MByte (The original is 4 MByte)

I thought this can identify yourself
Because the tplink router hardware modified can identify the size of the flash on your own

The router is Phicomm in the production of the old types of FWR 701

Now I use this firmware NBG-419N v2 can identify 8 m flash

Am glad that you can understand I write
I'm reading less. Ha, ha, ha
thanks.

@openwrt-bot
Copy link
Author

mkresin:

Yes I have done a hardware modification and changed the flash chip for 8 MByte (The original is 4 MByte)

You might want to mention such modifications with your first sentence, to not waste other peoples time.

I thought this can identify yourself

Well, the flash size is correctly identified. Nevertheless, the partition map is fixed. It isn't a bug, it is by design.

If you modify the hardware you have to modify the devicetree source file as well.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant