New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#1305 - Not working UAS driver for usb hdd case ORICO 2599US3-V1 #6243
Comments
emvova: usb hdd chipset |
diizzyy: This should be fixed in trunk/master, still an issue? |
nlobach: The same router, the same error for me. Mt external HDD drive is not recognized.
|
beatusman: Same problem USB3.0 HDD docking station Maiwo K308(JMS567 chipset). |
emvova: Hi guys, working usb2.0 (microusb cable) on OpenWrt 18.06.1 r7258-5eb055306f with: |
rags22489664: Same error on Mi router 3G on r8874-8f48414 |
paulfertser: Please try editing ''/etc/modules.d/usb-storage'' to add ''quirks=VID:PID:u'' after ''usb-storage'' (on the same line). VID/PID must be of your UAS device. ''kmod-usb-storage-uas'' should be installed. Reboot for the changes to take effect. |
velizare: same problems with a sharkoon quickport usb3 docking bay. router is an asus ac-rt65p.
quirk didn't help
device was not blacklisted for uas on the next boot.
|
paulfertser: Tamás, can you please check ''/sys/module/usb_storage/parameters/quirks'', did the parameter really get in there? If not, probably ''echo 357d:7788:u > /sys/module/usb_storage/parameters/quirks'' will do that, but until the reboot only. |
velizare: Paul, thanks, i'll do so later tonight, and return with the results to you. |
velizare: Paul, i've made the check, and /sys/module/usb_storage/parameters/quirks was empty after a reboot. Unfortunately, putting 357d:7788:u to the file above didn't help at all, by reinitialising the usb device openwrt is still sticking with uas. |
tuaminx: Thanks Pauls! Your method works in my case. Before: After: Software list: |
mitodeboa: Thanks Pauls, This method works for me too. With this dock station ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp. In OpenWrt 19.07.7, r11306-c4a6851c72 |
protoboolean: Fixed also
Adding it to /etc/modules.d/usb-storage made it persistent. NOTE: I had to specify VID and PID with 0x prefix (to indicatte the hexadecimal notation). How can one add multiple quirks in case more devices needed it? (I tried |
paulfertser: Alessandro, |
emvova:
[ 457.174784] scsi host0: uas
[ 457.178931] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 457.188303] xhci-mtk 1e1c0000.xhci: @000000000fded170 0ee20000 00000000 05000000 01058001
[ 457.196514] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 457.205879] xhci-mtk 1e1c0000.xhci: @000000000fded180 0ee20100 00000000 05000000 01078001
[ 464.441727] Data buffer not 16 bytes aligned: 8ee2c458
[ 464.469820] Data buffer not 16 bytes aligned: 8ee2c0d8
[ 464.477079] Data buffer not 16 bytes aligned: 8ee2c368
[ 477.979944] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 477.987509] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[ 479.029938] scsi host0: uas_eh_bus_reset_handler FAILED to get lock err -16
[ 479.036896] scsi 0:0:0:0: Device offlined - not ready after error recovery
FULL log
[ 0.000000] Linux version 4.9.77 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5972-74beb6f) ) #0 SMP Sun Jan 28 07:53:50 2018
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Xiaomi Mi Router 3G
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 80519c20, node_mem_map 81003000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 12 pages/cpu @8120f000 s17744 r8192 d23216 u49152
[ 0.000000] pcpu-alloc: s17744 r8192 d23216 u49152 alloc=124096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=00022211
[ 0.000000] Readback ErrCtl register=00022211
[ 0.000000] Memory: 253888K/262144K available (4083K kernel code, 221K rwdata, 920K rodata, 204K init, 272K bss, 8256K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007796] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.070423] pid_max: default: 32768 minimum: 301
[ 0.075160] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.081686] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.095326] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.095339] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.095351] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.095506] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.177455] Synchronize counters for CPU 1:
[ 0.177457] done.
[ 0.190893] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.190901] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.190910] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.190995] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.269476] Synchronize counters for CPU 2:
[ 0.269477] done.
[ 0.279363] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.279371] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.279379] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.279472] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.354659] Synchronize counters for CPU 3:
[ 0.354660] done.
[ 0.360901] Brought up 4 CPUs
[ 0.367821] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.377613] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.383863] pinctrl core: initialized pinctrl subsystem
[ 0.389755] NET: Registered protocol family 16
[ 0.403515] FPU Affinity set after 11720 emulations
[ 0.449650] pull PCIe RST: RALINK_RSTCTRL = 4000000
[ 0.754956] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.760005] ***** Xtal 40MHz *****
[ 0.763360] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.768459] Port 0 N_FTS = 1b105000
[ 0.771934] Port 1 N_FTS = 1b105000
[ 0.775368] Port 2 N_FTS = 1b102800
[ 1.930662] PCIE2 no card, disable it(RST&CLK)
[ 1.935027] -> 21007f2
[ 1.937422] PCIE0 enabled
[ 1.940014] PCIE1 enabled
[ 1.942610] PCI host bridge /pcie@1e140000 ranges:
[ 1.947395] MEM 0x0000000060000000..0x000000006fffffff
[ 1.952552] IO 0x000000001e160000..0x000000001e16ffff
[ 1.957754] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 2.009324] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.015156] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.020966] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 2.027884] PCI host bridge to bus 0000:00
[ 2.031941] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 2.038727] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 2.044616] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 2.051341] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 2.059269] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 2.059300] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.059312] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[ 2.059374] pci 0000:00:00.0: supports D1
[ 2.059383] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.059617] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 2.059641] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.059656] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[ 2.059705] pci 0000:00:01.0: supports D1
[ 2.059713] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 2.060115] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[ 2.060145] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.060267] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.060466] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.060648] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[ 2.060683] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.060728] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 2.060816] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.061016] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.061034] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 2.061093] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.067602] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.074545] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.081087] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.088015] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.094738] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[ 2.101497] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
[ 2.108649] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[ 2.115404] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[ 2.122138] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[ 2.128881] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.133788] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.140555] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[ 2.147793] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
[ 2.154968] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.159885] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
[ 2.166635] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref]
[ 2.173807] BAR0 at slot 0 = 0
[ 2.176821] bus=0x0, slot = 0x0
[ 2.179929] BAR0 at slot 1 = 0
[ 2.182941] bus=0x0, slot = 0x1
[ 2.186059] bus=0x1, slot = 0x0, irq=0xff
[ 2.190052] bus=0x2, slot = 0x1, irq=0xff
[ 2.195374] clocksource: Switched to clocksource GIC
[ 2.201886] NET: Registered protocol family 2
[ 2.206991] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.213879] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.220380] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.226740] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.232503] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.238991] NET: Registered protocol family 1
[ 2.243310] PCI: CLS 80 bytes, default 32
[ 2.475320] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.481720] Crashlog allocated RAM at address 0x3f00000
[ 2.487253] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 2.497205] random: fast init done
[ 2.503153] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.508957] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.521334] io scheduler noop registered
[ 2.525170] io scheduler deadline registered (default)
[ 2.530800] gpio-export gpio_export: 1 gpio(s) exported
[ 2.536631] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.546698] console [ttyS0] disabled
[ 2.550247] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[ 2.559239] console [ttyS0] enabled
[ 2.566106] bootconsole [early0] disabled
[ 2.575604] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.582660] Allocate 16 byte aligned buffer: 80588360
[ 2.587709] Enable NFI Clock
[ 2.590575] # MTK NAND # : Use HW ECC
[ 2.594233] Device not found, ID: c8d1
[ 2.597975] Not Support this Device!
[ 2.601702] chip_mode=00000001
[ 2.604750] Support this Device in MTK table! c8d1
[ 2.609710] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[ 2.616186] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
[ 2.622507] nand: ESMT NAND 128MiB 3,3V 8-bit
[ 2.626855] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.634399] Scanning device for bad blocks
[ 2.784501] 10 ofpart partitions found on MTD device MT7621-NAND
[ 2.790493] Creating 10 MTD partitions on "MT7621-NAND":
[ 2.795810] 0x000000000000-0x000000080000 : "Bootloader"
[ 2.802545] 0x000000080000-0x0000000c0000 : "Config"
[ 2.808805] 0x0000000c0000-0x000000100000 : "Bdata"
[ 2.814961] 0x000000100000-0x000000140000 : "Factory"
[ 2.821369] 0x000000140000-0x000000180000 : "crash"
[ 2.827570] 0x000000180000-0x0000001c0000 : "crash_syslog"
[ 2.834259] 0x0000001c0000-0x000000200000 : "reserved0"
[ 2.840866] 0x000000200000-0x000000600000 : "kernel_stock"
[ 2.847705] 0x000000600000-0x000000a00000 : "kernel"
[ 2.853942] 0x000000a00000-0x000007f80000 : "ubi"
[ 2.860898] [mtk_nand] probe successfully!
[ 2.865771] Signature matched and data read!
[ 2.870021] load_fact_bbt success 1023
[ 2.874429] libphy: Fixed MDIO Bus: probed
[ 2.947980] libphy: mdio: probed
[ 4.350751] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.357511] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
[ 4.368063] NET: Registered protocol family 10
[ 4.374121] NET: Registered protocol family 17
[ 4.378695] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.391609] 8021q: 802.1Q VLAN Support v1.8
[ 4.398759] UBI: auto-attach mtd9
[ 4.402087] ubi0: attaching mtd9
[ 4.618462] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[ 5.521109] ubi0: scanning is finished
[ 5.541359] ubi0: attached mtd9 (name "ubi", size 117 MiB)
[ 5.546892] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.553734] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.560504] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.567456] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
[ 5.573433] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 5.580638] ubi0: max/mean erase counter: 13/8, WL threshold: 4096, image sequence number: 2038926528
[ 5.589837] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
[ 5.599059] ubi0: background thread "ubi_bgt0d" started, PID 375
[ 5.601341] block ubiblock0_0: created from ubi0:0(rootfs)
[ 5.601351] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 5.601368] hctosys: unable to open rtc device (rtc0)
[ 5.628756] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 5.636357] Freeing unused kernel memory: 204K
[ 5.640789] This architecture does not have kernel memory protection.
[ 6.074383] init: Console is alive
[ 6.078103] init: - watchdog -
[ 6.598228] kmodloader: loading kernel modules from /etc/modules-boot.d/
[ 6.689821] usbcore: registered new interface driver usbfs
[ 6.695512] usbcore: registered new interface driver hub
[ 6.700979] usbcore: registered new device driver usb
[ 6.715182] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.720568] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 6.735589] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[ 6.744061] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
[ 6.750901] hub 1-0:1.0: USB hub found
[ 6.754722] hub 1-0:1.0: 2 ports detected
[ 6.759206] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.764511] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 6.772203] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.781167] hub 2-0:1.0: USB hub found
[ 6.784977] hub 2-0:1.0: 1 port detected
[ 6.791578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.815674] init: - preinit -
[ 7.225713] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[ 7.959769] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[ 10.669578] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 466
[ 10.743280] UBIFS (ubi0:1): recovery needed
[ 11.027687] UBIFS (ubi0:1): recovery completed
[ 11.032307] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.040127] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.050019] UBIFS (ubi0:1): FS size: 112754688 bytes (107 MiB, 888 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[ 11.060604] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 11.067215] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 20B5BE78-6BF9-4D9C-97D0-63EEEE29FCD2, small LPT model
[ 11.089886] mount_root: overlay filesystem has not been fully initialized yet
[ 11.099816] mount_root: switching to ubifs overlay
[ 11.120963] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 11.206878] procd: - early -
[ 11.209848] procd: - watchdog -
[ 11.915518] procd: - watchdog -
[ 11.918952] procd: - ubus -
[ 11.977423] procd: - init -
[ 12.220332] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.230433] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.243720] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 12.251747] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 12.260419] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.272071] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 12.311093] xt_time: kernel timezone is -0000
[ 12.364278] mt7603e 0000:01:00.0: ASIC revision: 76030010
[ 12.395013] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
[ 12.400808] mt7603e 0000:01:00.0: Build Time: 20160107100755
[ 12.445412] firmware init done
[ 12.617059] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.624541] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[ 12.655444] mt76x2e 0000:02:00.0: ROM patch already applied
[ 12.662251] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[ 12.667798] mt76x2e 0000:02:00.0: Build: 1
[ 12.671877] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[ 12.705439] mt76x2e 0000:02:00.0: Firmware running!
[ 12.711683] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 12.719726] PPP generic driver version 2.4.2
[ 12.725836] NET: Registered protocol family 24
[ 12.733132] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 19.603555] device eth0 entered promiscuous mode
[ 19.610919] br-lan: port 1(eth0.1) entered blocking state
[ 19.616476] br-lan: port 1(eth0.1) entered disabled state
[ 19.622586] device eth0.1 entered promiscuous mode
[ 19.634503] br-lan: port 1(eth0.1) entered blocking state
[ 19.639985] br-lan: port 1(eth0.1) entered forwarding state
[ 19.646017] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 20.605960] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 22.159899] random: crng init done
[ 191.009312] Data buffer not 16 bytes aligned: 8e40c028
[ 191.017026] Data buffer not 16 bytes aligned: 8e40c508
[ 191.025523] Data buffer not 16 bytes aligned: 8e40c238
[ 191.034117] Data buffer not 16 bytes aligned: 8e40c198
[ 191.052419] Data buffer not 16 bytes aligned: 8e40c4f8
[ 191.066409] Data buffer not 16 bytes aligned: 8e40c278
[ 191.081738] Data buffer not 16 bytes aligned: 8e40c1c8
[ 191.096954] Data buffer not 16 bytes aligned: 8e40c088
[ 191.111147] Data buffer not 16 bytes aligned: 8e40c028
[ 191.139460] Data buffer not 16 bytes aligned: 8e40c018
[ 191.161243] Data buffer not 16 bytes aligned: 8e40c028
[ 191.176451] Data buffer not 16 bytes aligned: 8e40c128
[ 191.193724] Data buffer not 16 bytes aligned: 8e40c018
[ 191.213324] Data buffer not 16 bytes aligned: 8e40c078
[ 191.225880] Data buffer not 16 bytes aligned: 8e40c2a8
[ 191.265755] Data buffer not 16 bytes aligned: 8e40c158
[ 191.278589] Data buffer not 16 bytes aligned: 8e40c138
[ 191.289159] Data buffer not 16 bytes aligned: 8e40c248
[ 191.317077] Data buffer not 16 bytes aligned: 8e40c278
[ 191.334425] Data buffer not 16 bytes aligned: 8e40c0e8
[ 191.350534] Data buffer not 16 bytes aligned: 8e40c0f8
[ 283.715442] kmodloader: loading kernel modules from /etc/modules.d/*
[ 283.733985] SCSI subsystem initialized
[ 283.745511] usbcore: registered new interface driver usb-storage
[ 283.751874] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 283.816960] kmodloader: loading kernel modules from /etc/modules.d/*
[ 283.825496] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 313.727224] Data buffer not 16 bytes aligned: 8ee38068
[ 313.741091] Data buffer not 16 bytes aligned: 8ee38128
[ 313.749533] Data buffer not 16 bytes aligned: 8ee38078
[ 313.756765] Data buffer not 16 bytes aligned: 8ee383d8
[ 313.785037] Data buffer not 16 bytes aligned: 8ee38128
[ 313.795667] Data buffer not 16 bytes aligned: 8ee38258
[ 313.805290] Data buffer not 16 bytes aligned: 8ee38418
[ 313.813705] Data buffer not 16 bytes aligned: 8ee381a8
[ 313.822188] Data buffer not 16 bytes aligned: 8ee380d8
[ 313.840545] Data buffer not 16 bytes aligned: 8ee38438
[ 313.848969] Data buffer not 16 bytes aligned: 8ee382d8
[ 434.295326] kmodloader: loading kernel modules from /etc/modules.d/*
[ 434.305009] usbcore: registered new interface driver ums-alauda
[ 434.312020] usbcore: registered new interface driver ums-cypress
[ 434.319060] usbcore: registered new interface driver ums-datafab
[ 434.326131] usbcore: registered new interface driver ums-freecom
[ 434.333240] usbcore: registered new interface driver ums-isd200
[ 434.340310] usbcore: registered new interface driver ums-jumpshot
[ 434.347438] usbcore: registered new interface driver ums-karma
[ 434.354646] usbcore: registered new interface driver ums-sddr09
[ 434.361748] usbcore: registered new interface driver ums-sddr55
[ 434.368806] usbcore: registered new interface driver ums-usbat
[ 434.374965] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 457.162257] kmodloader: loading kernel modules from /etc/modules.d/*
[ 457.174784] scsi host0: uas
[ 457.178931] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 457.188303] xhci-mtk 1e1c0000.xhci: @000000000fded170 0ee20000 00000000 05000000 01058001
[ 457.196514] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 457.205879] xhci-mtk 1e1c0000.xhci: @000000000fded180 0ee20100 00000000 05000000 01078001
[ 464.441727] Data buffer not 16 bytes aligned: 8ee2c458
[ 464.469820] Data buffer not 16 bytes aligned: 8ee2c0d8
[ 464.477079] Data buffer not 16 bytes aligned: 8ee2c368
[ 477.979944] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 477.987509] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[ 479.029938] scsi host0: uas_eh_bus_reset_handler FAILED to get lock err -16
[ 479.036896] scsi 0:0:0:0: Device offlined - not ready after error recovery
[ 479.044393] usbcore: registered new interface driver uas
[ 479.050016] kmodloader: done loading kernel modules from /etc/modules.d/*
The text was updated successfully, but these errors were encountered: