youxiaojie:

Supply the following if possible:

• Device problem occurs on
• Software versions of OpenWrt/LEDE release, packages, etc.
• Steps to reproduce

hello, I am compiling kernel for 88f6281 with 88e6161 switch for 4.9.73.but the dsa does not work correctly.I think it is a bug because 4.4 and 4.14 works fine.
both two bindings get the same result (port uninitialized, could not setup slave phy -19). thanks
this it the log
I think this is a upstream code problem.

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.73 (allan@debian000) (gcc version 7.2.0 (OpenWrt GCC 7.2.0 r5681+3-4e800716ac) ) #0 Sat Jan 20 07:07:06 2018
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt:Machine model: QiZhiTong 501M V2
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: rootdelay=1 root=/dev/mmcblk0p1 console=ttyS0,9600
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 513240K/524288K available (4450K kernel code, 282K rwdata, 1212K rodata, 244K init, 225K bss, 11048K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0460bb8 (4451 kB)
[ 0.000000] .init : 0xc0591000 - 0xc05ce000 ( 244 kB)
[ 0.000000] .data : 0xc05ce000 - 0xc0614b78 ( 283 kB)
[ 0.000000] .bss : 0xc0614b78 - 0xc064cfd0 ( 226 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000090] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.090096] pid_max: default: 32768 minimum: 301
[ 0.090227] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090247] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090807] CPU: Testing write buffer coherency: ok
[ 0.091128] Setting up static identity map for 0x81e0 - 0x821c
[ 0.091382] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[ 0.096402] VFP support v0.3: not present
[ 0.096598] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.096624] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.096714] pinctrl core: initialized pinctrl subsystem
[ 0.097697] NET: Registered protocol family 16
[ 0.098065] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.099438] cpuidle: using governor ladder
[ 0.099819] Feroceon L2: Enabling L2
[ 0.099861] Feroceon L2: Cache support initialised.
[ 0.100167] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.100277] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set
[ 0.105030] No ATAGs?
[ 0.122520] SCSI subsystem initialized
[ 0.123294] usbcore: registered new interface driver usbfs
[ 0.123380] usbcore: registered new interface driver hub
[ 0.123445] usbcore: registered new device driver usb
[ 0.125617] clocksource: Switched to clocksource orion_clocksource
[ 0.141617] NET: Registered protocol family 2
[ 0.142241] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.142300] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.142352] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.142413] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142435] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142600] NET: Registered protocol family 1
[ 0.145537] Crashlog allocated RAM at address 0x3f00000
[ 0.146064] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.155258] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.155271] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.163441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.163457] io scheduler noop registered
[ 0.163466] io scheduler deadline registered (default)
[ 0.164727] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 0.166290] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00
[ 0.166310] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.166324] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 0.166338] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.166627] PCI: bus0: Fast back to back transfers disabled
[ 0.166644] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.167149] PCI: bus1: Fast back to back transfers disabled
[ 0.167294] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 0.167316] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 0.167337] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.167353] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.201616] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.202684] console [ttyS0] disabled
[ 0.202755] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A
[ 6.147954] console [ttyS0] enabled
[ 6.190815] sata_mv f1080000.sata: slots 32 ports 1
[ 6.251354] scsi host0: sata_mv
[ 6.289260] ata1: SATA max UDMA/133 irq 32
[ 6.338834] nand: device found, Manufacturer ID: 0x20, Chip ID: 0x76
[ 6.414912] nand: ST Micro NAND 64MiB 3,3V 8-bit
[ 6.470212] nand: 64 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[ 6.557815] Scanning device for bad blocks
[ 6.825021] 3 ofpart partitions found on MTD device orion_nand
[ 6.894872] Creating 3 MTD partitions on "orion_nand":
[ 6.956434] 0x000000000000-0x000000100000 : "u-boot"
[ 7.017623] 0x000000100000-0x000000400000 : "kernel"
[ 7.078498] 0x000000400000-0x000004000000 : "ubi"
[ 7.140045] libphy: Fixed MDIO Bus: probed
[ 7.189698] libphy: mdio_driver_register: mv88e6085
[ 7.248389] libphy: orion_mdio_bus: probed
[ 7.300089] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 7.383044] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:90:0b:1f:bb:6c
[ 7.487449] ata1: SATA link down (SStatus 0 SControl F300)
[ 8.585629] random: fast init done
[ 8.626752] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:90:0b:1f:bb:6d
[ 8.731060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.809228] ehci-pci: EHCI PCI platform driver
[ 8.862532] ehci-orion: EHCI orion driver
[ 8.910649] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.976339] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 9.068194] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[ 9.165637] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 9.238336] hub 1-0:1.0: USB hub found
[ 9.283371] hub 1-0:1.0: 1 port detected
[ 9.330831] usbcore: registered new interface driver usb-storage
[ 9.403184] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[ 9.485603] i2c /dev entries driver
[ 9.527993] orion_wdt: Initial timeout 21 sec
[ 9.580736] mvsdio f1090000.mvsdio: Got CD GPIO
[ 9.691301] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 9.777637] NET: Registered protocol family 10
[ 9.832662] NET: Registered protocol family 17
[ 9.886000] Distributed Switch Architecture driver version 0.1
[ 9.959462] dsa dsa@0: switch 0x161 detected: Marvell 88E6161, revision 3
[ 10.040955] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 10.125463] libphy: mv88e6xxx SMI: probed
[ 10.173444] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: detected a Marvell 88E6161 switch
[ 10.282033] mmc0: host does not support reading read-only switch, assuming write-enable
[ 10.379712] mmc0: new high speed SD card at address 0002
[ 10.443922] mmcblk0: mmc0:0002 SD256 245 MiB
[ 10.497598] mmcblk0: p1
[ 10.528253] hub 1-1:1.0: USB hub found
[ 10.574009] hub 1-1:1.0: 2 ports detected
[ 10.731913] dsa dsa@0 lan1 (uninitialized): no phy at 0
[ 10.794534] dsa dsa@0 lan1 (uninitialized): failed to connect to port 0: -19
[ 10.879012] mv643xx_eth_port mv643xx_eth_port.0 eth0: error -19 setting up slave phy
[ 10.971811] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: can't create dsa slave device for port 0(lan1): -19
[ 11.091708] dsa dsa@0 lan2 (uninitialized): no phy at 1
[ 11.154290] dsa dsa@0 lan2 (uninitialized): failed to connect to port 1: -19
[ 11.238765] mv643xx_eth_port mv643xx_eth_port.0 eth0: error -19 setting up slave phy
[ 11.331574] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: can't create dsa slave device for port 1(lan2): -19
[ 11.451472] dsa dsa@0 lan3 (uninitialized): no phy at 2
[ 11.514059] dsa dsa@0 lan3 (uninitialized): failed to connect to port 2: -19
[ 11.598535] mv643xx_eth_port mv643xx_eth_port.0 eth0: error -19 setting up slave phy
[ 11.691349] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: can't create dsa slave device for port 2(lan3): -19
[ 11.811246] dsa dsa@0 lan4 (uninitialized): no phy at 3
[ 11.873828] dsa dsa@0 lan4 (uninitialized): failed to connect to port 3: -19
[ 11.958303] mv643xx_eth_port mv643xx_eth_port.0 eth0: error -19 setting up slave phy
[ 12.051112] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: can't create dsa slave device for port 3(lan4): -19
[ 12.171011] dsa dsa@0 aux (uninitialized): no phy at 4
[ 12.232555] dsa dsa@0 aux (uninitialized): failed to connect to port 4: -19
[ 12.315989] mv643xx_eth_port mv643xx_eth_port.0 eth0: error -19 setting up slave phy
[ 12.408798] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: can't create dsa slave device for port 4(aux): -19
[ 12.527705] 8021q: 802.1Q VLAN Support v1.8
[ 12.580488] UBI error: no valid UBI magic found inside mtd2
[ 12.647473] rtc-mv f1010300.rtc: setting system clock to 2018-01-24 19:53:14 UTC (1516823594)
[ 12.750399] Waiting 1 sec before mounting root device...
[ 13.846254] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
[ 13.943314] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.040303] VFS: Mounted root (ext3 filesystem) readonly on device 179:1.
[ 14.122298] Freeing unused kernel memory: 244K
[ 14.175459] This architecture does not have kernel memory protection.
[ 14.379279] init: Console is alive
[ 14.420186] init: - watchdog -
[ 14.467272] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 17.895752] mount_root: mounting /dev/root
[ 17.946014] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 18.010790] mount_root: loading kmods from internal overlay
[ 18.083392] mount_root: failed to launch kmodloader from internal overlay
[ 18.490088] block: attempting to load /etc/config/fstab
[ 18.553872] block: extroot: not configured
[ 18.604901] urandom-seed: Seeding with /etc/urandom.seed
[ 18.688940] procd: - early -
[ 18.723963] procd: - watchdog -
[ 19.605586] procd: - watchdog -
[ 19.643351] procd: - ubus -
[ 19.728971] procd: - init -
Please press Enter to activate this console.
[ 24.270780] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 108.065665] random: crng init done

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.39 (Wacke@HOME-Server) (gcc version 6.3.0 (LEDE GCC 6.3.0 r2699-939ef15) ) #0 Mon Jan 2 20:06:14 2017
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: QiZhiTong 501M V2
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0740a1c, node_mem_map dfbfa000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: rootdelay=1 root=/dev/mmcblk0p1 console=ttyS0,9600
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512032K/524288K available (4879K kernel code, 281K rwdata, 2012K rodata, 236K init, 217K bss, 12256K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc06c2e2c (6892 kB)
.init : 0xc06c3000 - 0xc06fe000 ( 236 kB)
.data : 0xc06fe000 - 0xc0744720 ( 282 kB)
.bss : 0xc0744720 - 0xc077ac38 ( 218 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000084] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.090093] pid_max: default: 32768 minimum: 301
[ 0.090216] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090235] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090755] CPU: Testing write buffer coherency: ok
[ 0.091107] Setting up static identity map for 0x81e0 - 0x821c
[ 0.091399] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[ 0.096395] VFP support v0.3: not present
[ 0.096630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.096816] pinctrl core: initialized pinctrl subsystem
[ 0.097955] NET: Registered protocol family 16
[ 0.098329] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.099325] cpuidle: using governor ladder
[ 0.099703] Feroceon L2: Enabling L2
[ 0.099745] Feroceon L2: Cache support initialised.
[ 0.100012] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.100153] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set
[ 0.122629] SCSI subsystem initialized
[ 0.123121] libata version 3.00 loaded.
[ 0.123492] usbcore: registered new interface driver usbfs
[ 0.123576] usbcore: registered new interface driver hub
[ 0.123642] usbcore: registered new device driver usb
[ 0.124654] clocksource: Switched to clocksource orion_clocksource
[ 0.140268] NET: Registered protocol family 2
[ 0.140918] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.140976] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141028] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141088] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.141111] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.141290] NET: Registered protocol family 1
[ 0.141340] PCI: CLS 0 bytes, default 32
[ 0.145635] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.145734] Crashlog allocated RAM at address 0x3f00000
[ 0.160530] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.160580] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.167582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.167602] io scheduler noop registered
[ 0.167615] io scheduler deadline registered (default)
[ 0.168981] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 0.169659] irq: Cannot allocate irq_descs @ IRQ35, assuming pre-allocated
[ 0.170059] irq: Cannot allocate irq_descs @ IRQ67, assuming pre-allocated
[ 0.170663] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[ 0.170681] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.170693] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 0.170705] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.170738] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[ 0.171013] PCI: bus0: Fast back to back transfers disabled
[ 0.171029] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.171183] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[ 0.171234] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4000ffff 64bit]
[ 0.171342] pci 0000:01:00.0: supports D1
[ 0.171355] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.171556] PCI: bus1: Fast back to back transfers disabled
[ 0.171573] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.171651] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 0.171671] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 0.171692] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.171707] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.205521] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.206582] console [ttyS0] disabled
[ 0.206652] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A
[ 6.176776] console [ttyS0] enabled
[ 6.219581] sata_mv f1080000.sata: version 1.28
[ 6.219783] sata_mv f1080000.sata: slots 32 ports 1
[ 6.280514] scsi host0: sata_mv
[ 6.318530] ata1: SATA max UDMA/133 irq 32
[ 6.368113] nand: device found, Manufacturer ID: 0x20, Chip ID: 0x76
[ 6.444255] nand: ST Micro NAND 64MiB 3,3V 8-bit
[ 6.499555] nand: 64 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[ 6.587156] Scanning device for bad blocks
[ 6.854552] 3 ofpart partitions found on MTD device orion_nand
[ 6.924423] Creating 3 MTD partitions on "orion_nand":
[ 6.985988] 0x000000000000-0x000000100000 : "u-boot"
[ 7.047214] 0x000000100000-0x000000500000 : "kernel"
[ 7.108039] 0x000000500000-0x000004000000 : "rootfs"
[ 7.170306] mtd: device 2 (rootfs) set to be root filesystem
[ 7.238150] mtdsplit: no squashfs found in "rootfs"
[ 7.297225] libphy: orion_mdio_bus: probed
[ 7.346294] mdio_bus f1072004.mdio-bu: /ocp@f1000000/mdio-bus@72004/ethernet-phy@1 has invalid PHY address
[ 7.462000] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 0
[ 7.543961] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 1
[ 7.625777] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 2
[ 7.707124] ata1: SATA link down (SStatus 0 SControl F300)
[ 7.773047] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 3
[ 7.854553] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 4
[ 7.936110] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 5
[ 8.017666] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 6
[ 8.099222] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 7
[ 8.180779] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 8
[ 8.262335] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 9
[ 8.343892] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 10
[ 8.426493] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 11
[ 8.509050] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 12
[ 8.591564] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 13
[ 8.674078] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 14
[ 8.756679] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 15
[ 8.839236] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 16
[ 8.921750] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 17
[ 9.004264] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 18
[ 9.086735] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 19
[ 9.169249] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 20
[ 9.251719] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 21
[ 9.334233] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 22
[ 9.416704] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 23
[ 9.499217] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 24
[ 9.581732] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 25
[ 9.664289] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 26
[ 9.746802] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 27
[ 9.829316] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 28
[ 9.911787] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 29
[ 9.994301] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 30
[ 10.076772] mdio_bus f1072004.mdio-bu: scan phy ethernet-phy at address 31
[ 10.159470] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 10.242219] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:90:0b:1f:bb:6c
[ 10.347984] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:90:0b:1f:bb:6d
[ 10.452291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.530454] ehci-pci: EHCI PCI platform driver
[ 10.583750] ehci-platform: EHCI generic platform driver
[ 10.646546] ehci-orion: EHCI orion driver
[ 10.694694] orion-ehci f1050000.ehci: EHCI Host Controller
[ 10.760459] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 10.852324] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[ 10.934678] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 11.007412] hub 1-0:1.0: USB hub found
[ 11.052506] hub 1-0:1.0: 1 port detected
[ 11.099990] usbcore: registered new interface driver usb-storage
[ 11.172444] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[ 11.254848] i2c /dev entries driver
[ 11.297413] orion_wdt: Initial timeout 21 sec
[ 11.350622] mvsdio f1090000.mvsdio: Got CD GPIO
[ 11.449970] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 11.535682] nf_conntrack version 0.5.0 (8000 buckets, 32000 max)
[ 11.609243] NET: Registered protocol family 10
[ 11.664735] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.729455] NET: Registered protocol family 17
[ 11.782713] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 11.933944] Distributed Switch Architecture driver version 0.1
[ 12.007412] mv643xx_eth_port mv643xx_eth_port.0 eth0: [0]: detected a Marvell 88E6161 (A2) switch
[ 12.113828] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 12.212061] mmc0: host does not support reading read-only switch, assuming write-enable
[ 12.309666] mmc0: new high speed SD card at address 0002
[ 12.373919] mmcblk0: mmc0:0002 SD256 245 MiB
[ 12.427265] mmcblk0: p1
[ 12.459144] hub 1-1:1.0: USB hub found
[ 12.504282] hub 1-1:1.0: 2 ports detected
[ 12.672337] libphy: dsa slave smi: probed
[ 12.731211] 8021q: 802.1Q VLAN Support v1.8
[ 12.784270] Key type encrypted registered
[ 12.833076] rtc-mv f1010300.rtc: setting system clock to 2018-01-24 14:50:07 UTC (1516805407)
[ 12.936923] Waiting 1 sec before mounting root device...
[ 14.005284] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
[ 14.102300] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.199324] VFS: Mounted root (ext3 filesystem) readonly on device 179:1.
[ 14.281297] Freeing unused kernel memory: 236K (c06c3000 - c06fe000)
[ 14.529869] init: Console is alive
[ 14.570781] init: - watchdog -
[ 14.617855] init: - preinit -
[ 14.776556] random: jshn: uninitialized urandom read (4 bytes read, 40 bits of entropy available)
[ 14.911283] random: jshn: uninitialized urandom read (4 bytes read, 40 bits of entropy available)
[ 15.046322] random: jshn: uninitialized urandom read (4 bytes read, 40 bits of entropy available)
[ 15.179980] random: jshn: uninitialized urandom read (4 bytes read, 40 bits of entropy available)
[ 15.311330] random: jshn: uninitialized urandom read (4 bytes read, 40 bits of entropy available)
[ 18.586948] mount_root: mounting /dev/root
[ 18.637194] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 18.702078] mount_root: loading kmods from internal overlay
[ 18.774738] mount_root: failed to launch kmodloader from internal overlay
[ 19.242236] block: attempting to load /etc/config/fstab
[ 19.305989] block: extroot: not configured
[ 19.356961] urandom-seed: Seeding with /etc/urandom.seed
[ 19.447779] procd: - early -
[ 19.482828] procd: - watchdog -
[ 20.378360] procd: - watchdog -
[ 20.416180] procd: - ubus -
[ 20.500569] random: ubusd: uninitialized urandom read (4 bytes read, 50 bits of entropy available)
[ 20.608253] random: ubusd: uninitialized urandom read (4 bytes read, 50 bits of entropy available)
[ 20.715682] random: ubusd: uninitialized urandom read (4 bytes read, 50 bits of entropy available)
[ 20.823310] random: ubusd: uninitialized urandom read (4 bytes read, 50 bits of entropy available)
[ 20.930755] random: ubusd: uninitialized urandom read (4 bytes read, 50 bits of entropy available)
[ 21.038833] procd: - init -
[ 24.500767] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 24.640529] device lan1 entered promiscuous mode
[ 24.695816] device eth0 entered promiscuous mode
[ 24.774381] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 24.865507] device lan2 entered promiscuous mode
[ 24.936796] device lan3 entered promiscuous mode
[ 25.037090] device lan4 entered promiscuous mode
[ 25.140000] device aux entered promiscuous mode
[ 25.201030] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 25.847186] dsa dsa@0 lan1: Link is Down
[ 26.896750] dsa dsa@0 aux: Link is Down
[ 26.996752] dsa dsa@0 lan2: Link is Down
[ 27.045794] dsa dsa@0 lan3: Link is Down
[ 27.094925] dsa dsa@0 lan4: Link is Down
[ 42.984686] random: nonblocking pool is initialized
root@OpenWrt:/proc#