Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1232 - enable in kernel CONFIG_SATA_PMP=1 for chipset Marvel #6610

Closed
openwrt-bot opened this issue Dec 19, 2017 · 3 comments
Closed

FS#1232 - enable in kernel CONFIG_SATA_PMP=1 for chipset Marvel #6610

openwrt-bot opened this issue Dec 19, 2017 · 3 comments
Labels

Comments

@openwrt-bot
Copy link

olgierdw:

This is similar request to FS#547.

This is required to use PMP on e.g. LinkSys WRT3200acm.

Explanation:
Generally routers like Linksys WRT3200Acm have both USB3 and eSata interfaces. To not cause Wifi 2.4GHz interference users should switch their NAS from USB3 to eSata. And this is not possible now if they have >1 HDD connected on the eSata. With 2 or more HDD over eSata required is PMP to access both/all drives. USB is different story, but Wifi 2.4GHz is unusable then.

Example discussion is here:
https://forum.lede-project.org/t/wrt3200acm-esata-port-multiplier/3690/7

@openwrt-bot
Copy link
Author

olgierdw:

How should I proceed to get it done?
Submit my patch?

@openwrt-bot
Copy link
Author

olgierdw:

attached file with patch

@openwrt-bot
Copy link
Author

biergaizi:

I guess nobody monitors here, you'll get your patch included in the mainline much more faster if you submit it to GitHub, and follow these instructions:

https://openwrt.org/submitting-patches

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant