Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1230 - ADSL connection can't be established on Arcadyan ARV7518PW in LEDE 17.01 #7973

Closed
openwrt-bot opened this issue Dec 18, 2017 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

doetoe:

I have an [[https://lede-project.org/toh/hwdata/arcadyanastoria/arcadyanastoria_arv7518pw|Arcadyan ARV7518PW]] ADSL router on which I flashed U-Boot, and installed different versions of OpenWrt and LEDE. I only manage to get an ADSL connection with OpenWrt 14.07, and not on OpenWrt 15.05.1, LEDE 17.01.3 and LEDE 17.01.4.

I checked that the DSL firmware in /lib/firmware is identical in all these versions. I installed the packages in different ways (direct upload using httpd from U-Boot, upgrade from other version), even on different routers (I have 3 of these), with consistent results.

Please let me know whatever information you'd like me to add.

@openwrt-bot
Copy link
Author

mkresin:

Please attach your /etc/config/network, the output of 'dmesg', the output of 'logread' and the output of '/etc/init.d/dsl_control status'.

Please provide some details about your provider.

@openwrt-bot
Copy link
Author

doetoe:

Hi Mathias,

Part of what you are asking for can be found in my question https://forum.lede-project.org/t/problems-setting-up-arcadyan-arv7518pw-as-an-adsl-gateway/9517 (when I thought it would probably just be a misconfiguration). I'll copy the relevant parts here. I will add the remaining items you asked for later (when I install that version again).

My ISP provided me with the following (in Spanish, but should be easy to understand):

ATM PVC VPI/VCI : 8/32
Categoría de servicio : UBR
Multiplexación : PPPoE
Username PPP : adsl@masmovil
Password PPP : masmovil
Modo de encapsulación : LLC
DSL Type : ADSL2+
Versión de dirección IP: IPv4
802.1Q - VLAN : 20
MTU : 1488

This is what my /etc/config/network configuration file looks (I tried many different settings, but none of it worked):

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config globals 'globals'
option ula_prefix 'fd59:32b9:4c4a::/48'

config interface 'lan'
option force_link '1'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ifname 'eth0.1'
option ipaddr '192.168.2.1'

config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'

config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0t 2 3 4 5'

config atm-bridge 'atm'
option vci '32'
option encaps 'llc'
option payload 'bridged'
option vpi '8'

config interface 'wan'
option proto 'pppoe'
option ipv6 '1'
option username 'adsl@masmovil'
option password 'masmovil'
option metric '1488'
option mtu '1488'
option _orig_ifname 'nas0'
option _orig_bridge 'false'
option ifname 'nas0.20'

config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'

config adsl 'dsl'
option annex 'a'
option firmware '/lib/firmware/adsl.bin'

Output from ifconfig:

br-lan Link encap:Ethernet HWaddr 7C:4F:B5:18:A5:A4
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::7e4f:b5ff:fe18:a5a4/64 Scope:Link
inet6 addr: fd59:32b9:4c4a::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:55741 errors:0 dropped:0 overruns:0 frame:0
TX packets:48626 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5000135 (4.7 MiB) TX bytes:6057077 (5.7 MiB)

eth0 Link encap:Ethernet HWaddr 7C:4F:B5:18:A5:A4
inet6 addr: fe80::7e4f:b5ff:fe18:a5a4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29633 errors:0 dropped:0 overruns:0 frame:0
TX packets:23009 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3366385 (3.2 MiB) TX bytes:3609745 (3.4 MiB)

eth0.1 Link encap:Ethernet HWaddr 7C:4F:B5:18:A5:A4
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29631 errors:0 dropped:0 overruns:0 frame:0
TX packets:22995 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2773220 (2.6 MiB) TX bytes:3469400 (3.3 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3284 errors:0 dropped:0 overruns:0 frame:0
TX packets:3284 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:233881 (228.3 KiB) TX bytes:233881 (228.3 KiB)

nas0 Link encap:Ethernet HWaddr 00:00:01:00:00:00
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

nas0.20 Link encap:Ethernet HWaddr 00:00:01:00:00:00
UP BROADCAST MULTICAST MTU:1488 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

wlan0 Link encap:Ethernet HWaddr 7C:4F:B5:18:A5:A5
inet6 addr: fe80::7e4f:b5ff:fe18:a5a5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26109 errors:0 dropped:0 overruns:0 frame:0
TX packets:26424 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2592435 (2.4 MiB) TX bytes:3444530 (3.2 MiB)

dmesg output ends with

[ 32.892848] device eth0.1 entered promiscuous mode
[ 32.896227] device eth0 entered promiscuous mode
[ 32.919960] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 34.006560] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready
[ 34.048332] IPv6: ADDRCONF(NETDEV_UP): nas0.20: link is not ready
[ 34.584771] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.604352] br-lan: port 1(eth0.1) entered forwarding state
[ 34.608567] br-lan: port 1(eth0.1) entered forwarding state
[ 34.684292] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 35.557174] ath: EEPROM regdomain: 0x82d4
[ 35.559690] ath: EEPROM indicates we should expect a country code
[ 35.565688] ath: doing EEPROM country->regdmn map search
[ 35.570821] ath: country maps to regdmn code: 0x37
[ 35.575459] ath: Country alpha2 being used: ES
[ 35.579769] ath: Regpair used: 0x37
[ 35.583153] ath: regdomain 0x82d4 dynamically updated by user
[ 36.612183] br-lan: port 1(eth0.1) entered forwarding state
[ 38.995110] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.101758] device wlan0 entered promiscuous mode
[ 40.078010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.083226] br-lan: port 2(wlan0) entered forwarding state
[ 40.088327] br-lan: port 2(wlan0) entered forwarding state
[ 42.092183] br-lan: port 2(wlan0) entered forwarding state
[ 139.341067] IPv6: ADDRCONF(NETDEV_UP): nas0: link is not ready
[ 139.376758] IPv6: ADDRCONF(NETDEV_UP): nas0.20: link is not ready

where the last two appear after connecting the ADSL and pressing connect in LuCI.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant