New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#1158 - ATH10k QCA9880 5 Ghz mixed mode (sta and ap) not possible #6089
Comments
sumpfralle: In order to reduce any chance of misunderstandings:
As far as I know, the mixed ap/sta mode works as follows:
Thus there will be no ap setup, if the sta fails to connect to its ap. |
Rampler:
Hope this help's |
BIGFAT: Hallo, this Problem still exist in 18.06.0-rc1 and for the Archer c5 v1 (same hardware). Greetings. |
Rampler: Actuell test with trunk OpenWrt SNAPSHOT r8863, results in: daemon.err hostapd: Failed to set beacon parameters |
Rampler: see also: |
BIGFAT:
The TP-Link Archer C2600 have the same problem in 18.01 (same 5ghz radio). |
Razerwire: FS#3569 is a duplicate of this bug. |
Getting same error on TP-Link Archer C7 v5 (OpenWrt 23.05.0 r23497-6637af95aa / LuCI openwrt-23.05 branch git-23.236.53405-fc638c8)
And I noticed this issue after I configured band steering and installed usteer. |
Rampler:
Hardware: Archer C7 V2
Software: Trunk (r5280)
Using the 5 Ghz radio in accesspoint mode (mode ap) and client mode (mode sta) at the same time doesnt work.
Only client mode works.
No error messages will be generated.
With version V17.01.4 all is fine (same configuration).
Config details:
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11a'
option path 'pci0000:01/0000:01:00.0'
option noscan '1'
option htmode 'VHT80'
option multicast_querier '0'
option igmp_snooping '0'
option distance '8'
option log_level '3'
option compression '1'
option bursting '1'
option ff '1'
option country 'US'
option txpower '23'
option channel '112'
config wifi-device 'radio1'
option type 'mac80211'
option hwmode '11g'
option path 'platform/qca955x_wmac'
option noscan '1'
option htmode 'HT40'
option distance '15'
option multicast_querier '0'
option igmp_snooping '0'
option log_level '3'
option compression '1'
option bursting '1'
option ff '1'
option channel '9'
option country 'US'
option txpower '24'
option disabled '0'
config wifi-iface
option encryption 'psk2'
option device 'radio0'
option mode 'sta'
option bssid '08:96:D7:7B:89:BA'
option key 'xxxxxxxxxxxxxxxxxxxxxx'
option multicast_querier '0'
option igmp_snooping '0'
option ssid 'Fritz_5Ghz'
option network 'WWAN WWAN6'
config wifi-iface
option ssid 'im6shop'
option device 'radio1'
option key 'xxxxxxxxxxxxxxxxxxxxxx'
option multicast_querier '0'
option igmp_snooping '0'
option network 'LAN'
option mode 'ap'
option encryption 'psk2'
config wifi-iface
option device 'radio0'
option mode 'ap'
option key 'xxxxxxxxxxxxxxxxxxxxxx'
option macfilter 'allow'
list maclist '78:0C:B8:8A:12:45'
list maclist '88:32:9B:F6:70:79'
list maclist 'F0:27:65:7F:7A:19'
option encryption 'psk2+ccmp'
option network 'LAN'
option ssid 'im6shop'
If you need further details, let me know
regards Klaus
The text was updated successfully, but these errors were encountered: