New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#1152 - WDR3600: Wifi randomly turns off and get disabled #7978
Comments
kclkcl: Full log:
|
FrancYescO: I can confirm this, but this is happening very rarely instead i'm having a lot of wifi drops between WDS AP and WDS Client (2 WDR3600 v1.2 and v1.4 on the 2.4GHz) that automatically restore connection after ~30secs this is driving me crazy to get whats wrong but i'm start supposing that is something to do with tx power of the radios |
solt: I'm observing the similar with 18.06.1 (r7258) on WNDR3800. /etc/config/wireless shows disabled=1 config wifi-device 'radio0' config wifi-iface 'default_radio0' config wifi-device 'radio1' config wifi-iface 'default_radio1' Packages installed: |
Adam1986: Hello, I can confirm that I am facing the same issue as above, 2.4GHz will drop out and a reboot is required. I have not encountered the interface still remaining disabled following a reboot but the logs show the same as pasted above. |
How this was fixed ? I'm sttill experiencing this issue in 2022 |
Issue still exist in OpenWrt 22.03.1. |
Happens to my TP-Link WDR3600 running |
kclkcl:
Running LEDE 17.01.4
I'm not sure how do I reproduce this problem, it just happen randomly at random time.
This never happened back when I used OpenWRT, were there some regression somewhere?
So with LEDE, my router's wifi randomly disconnect and disable itself. I have read the logs (provided below) yet I can't see anything suspicious. I only see these:
Mon Nov 6 13:54:45 2017 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Mon Nov 6 13:54:45 2017 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Mon Nov 6 13:54:45 2017 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Mon Nov 6 13:54:45 2017 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
This was around the time people in my home messaged me that they cannot find the access point from their devices
It bugs me because I usually go to the office in the afternoon and people in my house complains to me that Wifi stops working without anything being done to the router, I have not set up VPN access to my home network so I cannot do anything until I go home in the evening.
The text was updated successfully, but these errors were encountered: