You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Yesterday I upgraded the Linksys wrt1200ac from openwrt 15.05.1
to lede-17.01.4. The upgrade was done through a luci web
interface.
After reboot the wan connection was gone, as well as all local
ethernet ports. Wifi continued to work fine. The configuration
seems to have survived the upgrade. I couldn't find anything
wrong with the configuration.
On the Internet port there were no packets coming in. On the
ethernet port 1 there are bootp/dhcp requests coming from the
router.
Not sure if that is relevant, but reverting back to 15.05.1
didn't work either: the router is currently completely
inaccessible. I don't have a serial cable, will probably order
one to try to debrick the thing.
The text was updated successfully, but these errors were encountered:
I can confirm that I had the same issue with this device and version.
As a temporary solution until a fix is out and since I had access to the terminal from WiFi, I used fw_printenv boot_part and fw_setenv boot_part to turn back to openwrt
Don't know if it's the exact same issue, but I ran into something very similar on my WRT1900ACS going from 15.05.1 to lede-17.01.4. Ethernet interfaces' config seemed fine, but could not connect on WAN or LAN side. Had to revert to 15.05.1 using "off-and-on 3 times" method.
dmuhamedagic:
Yesterday I upgraded the Linksys wrt1200ac from openwrt 15.05.1
to lede-17.01.4. The upgrade was done through a luci web
interface.
After reboot the wan connection was gone, as well as all local
ethernet ports. Wifi continued to work fine. The configuration
seems to have survived the upgrade. I couldn't find anything
wrong with the configuration.
On the Internet port there were no packets coming in. On the
ethernet port 1 there are bootp/dhcp requests coming from the
router.
Not sure if that is relevant, but reverting back to 15.05.1
didn't work either: the router is currently completely
inaccessible. I don't have a serial cable, will probably order
one to try to debrick the thing.
The text was updated successfully, but these errors were encountered: