We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
pkx232C:
Hi !
I'm using a Huwei E160E 3G dongle with Openwrt 19.07.4. I configured 3G connexion following this guide : https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle
All works OK as long as I do not reboot the router. After reboot 3g interface says "Error : network device is not present"
I have to ssh and do network restart to get it working again. As a workaround I added sleep 30; /etc/init.d/network restart to /etc/rc.local
According to dmesg I would think the 3g stick is detected after networking start. The log is in attachment.
I tested on two routers : Gl.inet AR-150 and TP-Link Tl-WR3600. Both had the same behavior.
Please let me know if I can help.
Kind Regards,
Ed.
The text was updated successfully, but these errors were encountered:
No branches or pull requests
pkx232C:
Hi !
I'm using a Huwei E160E 3G dongle with Openwrt 19.07.4. I configured 3G connexion following this guide : https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle
All works OK as long as I do not reboot the router. After reboot 3g interface says "Error : network device is not present"
I have to ssh and do network restart to get it working again. As a workaround I added sleep 30; /etc/init.d/network restart to /etc/rc.local
According to dmesg I would think the 3g stick is detected after networking start. The log is in attachment.
I tested on two routers : Gl.inet AR-150 and TP-Link Tl-WR3600. Both had the same behavior.
Please let me know if I can help.
Kind Regards,
Ed.
The text was updated successfully, but these errors were encountered: