You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have a BT Humehub 5A with a Huawei E3372 dongle, used purely for a backup for my VDSL connection, so only tested every few months, I noticed with 19.07.03 it wasn't working, so I upgraded to 19.07.04 and it's still not working.
It seems to initially "see" the dongle, then fail to talk to it
root@hh5a:~# dmesg|grep -i usb
[ 0.374109] usbcore: registered new interface driver usbfs
[ 0.379680] usbcore: registered new interface driver hub
[ 0.385095] usbcore: registered new device driver usb
[ 1.651958] USB_VBUS: disabling
[ 3.779353] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
[ 3.786491] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
[ 3.794916] dwc2 1e101000.usb: dwc2_core_reset() HANG! AHB Idle GRSTCTL=0
[ 4.001788] dwc2 1e101000.usb: DWC OTG Controller
[ 4.005122] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
[ 4.012215] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
[ 4.018987] hub 1-0:1.0: USB hub found
[ 11.543311] usbcore: registered new interface driver cdc_wdm
[ 11.902165] usbcore: registered new interface driver usbserial
[ 11.906895] usbcore: registered new interface driver usbserial_generic
[ 11.913296] usbserial: USB Serial support registered for generic
[ 11.994648] usbcore: registered new interface driver cdc_ncm
[ 12.039432] usbcore: registered new interface driver huawei_cdc_ncm
[ 15.249532] usb 1-1: new high-speed USB device number 2 using dwc2
[ 16.453533] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 16.645469] usb 1-1: new high-speed USB device number 3 using dwc2
[ 16.650389] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.657632] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.664934] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.672397] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.679561] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.686865] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.694339] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.701495] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.708802] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 17.366922] usbcore: registered new interface driver option
[ 17.371364] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.925693] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 17.931060] usb usb1-port1: attempt power cycle
Normally it would use /dev/ttyUSB0 but as a result of the above erros, no USB tty devices exist
root@hh5a:~# ls /dev/tty*
/dev/tty /dev/ttyLTQ0
The text was updated successfully, but these errors were encountered:
andyburns:
I have a BT Humehub 5A with a Huawei E3372 dongle, used purely for a backup for my VDSL connection, so only tested every few months, I noticed with 19.07.03 it wasn't working, so I upgraded to 19.07.04 and it's still not working.
It seems to initially "see" the dongle, then fail to talk to it
root@hh5a:~# dmesg|grep -i usb
[ 0.374109] usbcore: registered new interface driver usbfs
[ 0.379680] usbcore: registered new interface driver hub
[ 0.385095] usbcore: registered new device driver usb
[ 1.651958] USB_VBUS: disabling
[ 3.779353] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
[ 3.786491] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
[ 3.794916] dwc2 1e101000.usb: dwc2_core_reset() HANG! AHB Idle GRSTCTL=0
[ 4.001788] dwc2 1e101000.usb: DWC OTG Controller
[ 4.005122] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
[ 4.012215] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
[ 4.018987] hub 1-0:1.0: USB hub found
[ 11.543311] usbcore: registered new interface driver cdc_wdm
[ 11.902165] usbcore: registered new interface driver usbserial
[ 11.906895] usbcore: registered new interface driver usbserial_generic
[ 11.913296] usbserial: USB Serial support registered for generic
[ 11.994648] usbcore: registered new interface driver cdc_ncm
[ 12.039432] usbcore: registered new interface driver huawei_cdc_ncm
[ 15.249532] usb 1-1: new high-speed USB device number 2 using dwc2
[ 16.453533] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 16.645469] usb 1-1: new high-speed USB device number 3 using dwc2
[ 16.650389] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.657632] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.664934] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.672397] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.679561] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.686865] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.694339] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.701495] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 16.708802] dwc2 1e101000.usb: NYET/NAK/ACK/other in non-error case, 0x00000002
[ 17.366922] usbcore: registered new interface driver option
[ 17.371364] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.925693] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 17.931060] usb usb1-port1: attempt power cycle
Normally it would use /dev/ttyUSB0 but as a result of the above erros, no USB tty devices exist
root@hh5a:~# ls /dev/tty*
/dev/tty /dev/ttyLTQ0
The text was updated successfully, but these errors were encountered: