Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2163 - New installation via OEM method on Linksys WRT1900AC v1 (mamba) fails #7006

Open
openwrt-bot opened this issue Mar 5, 2019 · 0 comments
Labels

Comments

@openwrt-bot
Copy link

gbgar:

Trying to flash a new installation of either openWRT (openwrt-18.06.2-mvebu-cortexa9-linksys-wrt1900ac-squashfs-factory.img) or the Davidc variant (lede-mvebu-cortexa9-linksys-wrt1900ac-squashfs-factory.img)from OEM gui fails on Linksys WRT1900AC v1 with firmware version 1.1.10.187766.

To reproduce, attempt to flash either image using the Linksys gui. Go to the "Connectivity" tab. In the area labeled "Manual", choose the image file, and click "Start". According to the gui, the flash is successful and proceeds to restart. The power and ethernet indicators light up for a bit, then the internet flashes orange until the router reboots into the Linksys firmware.

From my research, silent failure like this indicates the flash didn't actually succeed, but I don't have a serial cable or much time to do further diagnosis at the moment.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant