Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2114 - WG302v1 (ixp4xx-generic) LAN (eth0) start and then stop at boot #8413

Closed
openwrt-bot opened this issue Feb 10, 2019 · 0 comments
Closed
Labels

Comments

@openwrt-bot
Copy link

moocan:

Hello

Device: Netgear WG302v1 ixp4xx
FW: 18.06.1 & 18.06.2

Device problem occurs at boot.
During boot LAN (eth0) become ready (LEDs are lit) and then stop after ~2 or ~3 seconds (LEDs are off).
WAN (radio) interface seems working but Ethernet (eth0) is down.
Impossible to get it up because ifconfig up have no effect.

No packages are installed only stock zImage and Shashfs.

With 18.06.1 (default config, IP after flashing) :
OpenWRT say that ethO is up and ready but eth0 and LEDs are off.
Impossible to reach LuCi or ping a computer with IP 192.168.1.10 (connected through serial console on device)
At boot eth0 stay up sometimes ~ 1 of 20.

With 18.06.2 (default config, IP after flashing) :
It seems there are more information during boot.
Kernel is reporting that br-lan: port 1(eth0) entered disabled stat
ifconfig up/down has no effect.

Step to reproduce:
Flash & boot.

You can find included as attached file 18.06.1 & 18.06.2 dmesg boot log.

Kind Regards

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant