You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
1 compile and flash
2 bring up the 5 GHz wifi interface
3 check the dmesg output
4 the wifi may or may not start when enabled
The CPU usage is pretty high (close to 80-90% used by sirq) when transferring 50-80 Mbps of data from the Internet. Packets are lost sometimes over the wifi and the wifi appears unstable overall. This packet loss doesn't occur when pinging directly from the router.
The router is on a 5 GHz channel which is free.
I had to push the wifi on/off switch to get the wifi to work.
The text was updated successfully, but these errors were encountered:
nopnopnop:
device: Archer C7 v2.0
OpenWrt revision: OpenWrt SNAPSHOT r8385-374e646
1 compile and flash
2 bring up the 5 GHz wifi interface
3 check the dmesg output
4 the wifi may or may not start when enabled
The CPU usage is pretty high (close to 80-90% used by sirq) when transferring 50-80 Mbps of data from the Internet. Packets are lost sometimes over the wifi and the wifi appears unstable overall. This packet loss doesn't occur when pinging directly from the router.
The router is on a 5 GHz channel which is free.
I had to push the wifi on/off switch to get the wifi to work.
The text was updated successfully, but these errors were encountered: