New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#1832 - Tplink c2600 v1 Internet Connection with SQM / Layer Cake slow #8475
Comments
sele: It appears on Cake / Layer Cake. Pice of Cake works better, but still with performance problems. |
moeller0: How does fq_codel/simple.qos and fq_codel/simplest.qos work for you. Also please post links to dslreports spedtests (ideally following the howto at [[http://example.com|External Linkhttps://forum.openwrt.org/t/sqm-qos-recommended-settings-for-the-dslreports-speedtest-bufferbloat-testing/2803]]) with and without SQM (if you have the time it would be nice to see cake/layer_cake, fq_codel/simple.qos). |
sele: ##cat /etc/config/sqm config queue 'eth1' tc -s qdiscqdisc noqueue 0: dev lo root refcnt 2
thresh 2500Kbit 40Mbit 10Mbit qdisc ingress ffff: dev pppoe-wan parent ffff:fff1 ----------------
thresh 94Mbit tc -d qdiscqdisc noqueue 0: dev lo root refcnt 2 |
sele: Speedtest with Cace / Layer Cake |
sele: Speedtest with fq_codel / simple.qos |
sele: But the results are strange, it seems that the Cake / Layer Cake setup workst for some reason better now. |
moeller0: So with your shaper settings the expected maximum speedtest results for down- and upstream are: I believe you are not doing that badly currently. If you could press the "Results + Share" button after a test has finished you could copy a link to the detailed results page, but from the overview graphs I fail to see the exact problem. Now the next question is going to be CPU usage during these tests... |
sele:
I flashed OpenWrt 18.06.1 on my Tplink Archer c2600 v1.0
When i use SQM the Internet connection is slow ( 50% Slower than without SQM )
Without SQM the Internet Speed is normal again.
The SQM settings are the same that i use on my Tplink Archer C7 and on the C7 everything works
great.
The text was updated successfully, but these errors were encountered: